sn54hc04, sn74hc04 hex inverters scls078d ? december 1982 ? revised july 2003 1 post office box 655303 ? dallas, texas 75265 wide operating voltage range of 2 v to 6 v outputs can drive up to 10 lsttl loads low power consumption, 20- a max i cc typical t pd = 8 ns 4-ma output drive at 5 v low input current of 1 a max 1 2 3 4 5 6 7 14 13 12 11 10 9 8 1a 1y 2a 2y 3a 3y gnd v cc 6a 6y 5a 5y 4a 4y sn54hc04 ...j or w p ackage sn74hc04 . . . d, n, ns, or pw package (top view) 3212019 910111213 4 5 6 7 8 18 17 16 15 14 6y nc 5a nc 5y 2a nc 2y nc 3a 1y 1a nc 4y 4a v 6a 3y gnd nc sn54hc04 . . . fk package (top view) cc nc ? no internal connection description/ordering information the ?hc04 devices contain six independent inverters. they perform the boolean function y = a in positive logic. ordering information t a package ? orderable part number top-side marking pdip ? n tube of25 sn74hc04n sn74hc04n tube of 50 SN74HC04D soic ? d reel of 2500 SN74HC04Dr hc04 40 cto85 c reel of 250 SN74HC04Dt ? 40 c to 85 c sop ? ns reel of 2000 sn74hc04nsr hc04 tube of 90 sn74hc04pw tssop ? pw reel of 2000 sn74hc04pwr hc04 reel of 250 sn74hc04pwt cdip ? j tube of 25 snj54hc04j snj54hc04j ?55 c to 125 c cfp ? w tube of 150 snj54hc04w snj54hc04w lccc ? fk tube of 55 snj54hc04fk snj54hc04fk ? package drawings, standard packing quantities, thermal data, symbolization, and pcb design guidelines are available at www.ti.com/sc/package. function table (each inverter) input a output y h l l h please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. copyright ? 2003, texas instruments incorporated production data information is current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. on products compliant to mil-prf-38535, all parameters are tested unless otherwise noted. on all other products, production processing does not necessarily include testing of all parameters.
sn54hc04, sn74hc04 hex inverters scls078d ? december 1982 ? revised july 2003 2 post office box 655303 ? dallas, texas 75265 logic diagram (positive logic) ay absolute maximum ratings over operating free-air temperature range (unless otherwise noted) ? supply voltage range, v cc ? 0.5 v to 7 v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . input clamp current, i ik (v i < 0 or v i > v cc ) (see note 1) 20 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . output clamp current, i ok (v o < 0 or v o > v cc ) (see note 1) 20 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous output current, i o (v o = 0 to v cc ) 25 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . continuous current through v cc or gnd 50 ma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . package thermal impedance, ja (see note 2): d package 86 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n package 80 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ns package 76 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pw package 113 c/w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . storage temperature range, t stg ? 65 c to 150 c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ? stresses beyond those listed under ? absolute maximum ratings ? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ? recommended operating conditions ? is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. notes: 1. the input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. the package thermal impedance is calculated in accordance with jesd 51-7. recommended operating conditions (see note 3) sn54hc04 sn74hc04 unit min nom max min nom max unit v cc supply voltage 2 5 6 2 5 6 v v cc = 2 v 1.5 1.5 v ih high-level input voltage v cc = 4.5 v 3.15 3.15 v v cc = 6 v 4.2 4.2 v cc = 2 v 0.5 0.5 v il low-level input voltage v cc = 4.5 v 1.35 1.35 v v cc = 6 v 1.8 1.8 v i input voltage 0 v cc 0 v cc v v o output voltage 0 v cc 0 v cc v v cc = 2 v 1000 1000 ? t/ ? v input transition rise/fall time v cc = 4.5 v 500 500 ns v cc = 6 v 400 400 t a operating free-air temperature ? 55 125 ? 40 85 c note 3: all unused inputs of the device must be held at v cc or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs , literature number scba004.
sn54hc04, sn74hc04 hex inverters scls078d ? december 1982 ? revised july 2003 3 post office box 655303 ? dallas, texas 75265 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) parameter test conditions v cc t a = 25 c sn54hc04 sn74hc04 unit parameter test conditions v cc min typ max min max min max unit 2 v 1.9 1.998 1.9 1.9 i oh = ? 20 a 4.5 v 4.4 4.499 4.4 4.4 v oh v i = v ih or v il 6 v 5.9 5.999 5.9 5.9 v i oh = ? 4 ma 4.5 v 3.98 4.3 3.7 3.84 i oh = ? 5.2 ma 6 v 5.48 5.8 5.2 5.34 2 v 0.002 0.1 0.1 0.1 i ol = 20 a 4.5 v 0.001 0.1 0.1 0.1 v ol v i = v ih or v il 6 v 0.001 0.1 0.1 0.1 v i ol = 4 ma 4.5 v 0.17 0.26 0.4 0.33 i ol = 5.2 ma 6 v 0.15 0.26 0.4 0.33 i i v i = v cc or 0 6 v 0.1 100 1000 1000 na i cc v i = v cc or 0, i o = 0 6 v 2 40 20 a c i 2 v to 6 v 3 10 10 10 pf switching characteristics over recommended operating free-air temperature range, c l = 50 pf (unless otherwise noted) (see figure 1) parameter from to v cc t a = 25 c sn54hc04 sn74hc04 unit parameter (input) (output) v cc min typ max min max min max unit 2 v 45 95 145 120 t pd a y 4.5 v 9 19 29 24 ns 6 v 8 16 25 20 2 v 38 75 110 95 t t y 4.5 v 8 15 22 19 ns 6 v 6 13 19 16 operating characteristics, t a = 25 c parameter test conditions typ unit c pd power dissipation capacitance per inverter no load 20 pf
sn54hc04, sn74hc04 hex inverters scls078d ? december 1982 ? revised july 2003 4 post office box 655303 ? dallas, texas 75265 parameter measurement information voltage waveform input rise and fall times 50% 50% 10% 10% 90% 90% v cc 0 v t r t f input voltage waveforms propagation delay and output transition times 50% 50% 50% 10% 10% 90% 90% v cc v oh v ol 0 v t r t f input in-phase output 50% t plh t phl 50% 50% 10% 10% 90% 90% v oh v ol t r t f t phl t plh out-of-phase output test point from output under test c l = 50 pf (see note a) load circuit notes: a. c l includes probe and test-fixture capacitance. b. phase relationships between waveforms were chosen arbitrarily. all input pulses are supplied by generators having the followi ng characteristics: prr 1 mhz, z o = 50 ? , t r = 6 ns, t f = 6 ns. c. the outputs are measured one at a time with one input transition per measurement. d. t plh and t phl are the same as t pd . figure 1. load circuit and voltage waveforms
packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) 5962-8409801vca active cdip j 14 1 none call ti level-nc-nc-nc 5962-8409801vda active cfp w 14 1 none call ti level-nc-nc-nc 84098012a active lccc fk 20 1 none call ti level-nc-nc-nc 8409801ca active cdip j 14 1 none call ti level-nc-nc-nc 8409801da active cfp w 14 1 none call ti level-nc-nc-nc jm38510/65701b2a active lccc fk 20 1 none call ti level-nc-nc-nc jm38510/65701bca active cdip j 14 1 none call ti level-nc-nc-nc jm38510/65701bda active cfp w 14 1 none call ti level-nc-nc-nc sn54hc04j active cdip j 14 1 none call ti level-nc-nc-nc SN74HC04D active soic d 14 50 pb-free (rohs) cu nipdau level-2-260c-1 year/ level-1-235c-unlim SN74HC04Dbr active ssop db 14 2000 pb-free (rohs) cu nipdau level-2-260c-1 year/ level-1-235c-unlim SN74HC04Dr active soic d 14 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim SN74HC04Dt active soic d 14 250 pb-free (rohs) cu nipdau level-2-260c-1 year/ level-1-235c-unlim sn74hc04n active pdip n 14 25 pb-free (rohs) cu nipdau level-nc-nc-nc sn74hc04n3 obsolete pdip n 14 none call ti call ti sn74hc04nsr active so ns 14 2000 pb-free (rohs) cu nipdau level-2-260c-1 year/ level-1-235c-unlim sn74hc04pw active tssop pw 14 90 pb-free (rohs) cu nipdau level-1-250c-unlim sn74hc04pwle obsolete tssop pw 14 none call ti call ti sn74hc04pwr active tssop pw 14 2000 pb-free (rohs) cu nipdau level-1-250c-unlim sn74hc04pwt active tssop pw 14 250 pb-free (rohs) cu nipdau level-1-250c-unlim snj54hc04fk active lccc fk 20 1 none call ti level-nc-nc-nc snj54hc04j active cdip j 14 1 none call ti level-nc-nc-nc snj54hc04w active cfp w 14 1 none call ti level-nc-nc-nc snv54hc04j active cdip j 14 none call ti call ti snv54hc04w active cfp w 14 none call ti call ti (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - may not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. none: not yet available lead (pb-free). pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. package option addendum www.ti.com 8-mar-2005 addendum-page 1
green (rohs & no sb/br): ti defines "green" to mean "pb-free" and in addition, uses package materials that do not contain halogens, including bromine (br) or antimony (sb) above 0.1% of total product weight. (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedecindustry standard classifications, and peak solder temperature. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. package option addendum www.ti.com 8-mar-2005 addendum-page 2
mechanical data mlcc006b october 1996 post office box 655303 ? dallas, texas 75265 fk (s-cqcc-n**) leadless ceramic chip carrier 4040140 / d 10/96 28 terminal shown b 0.358 (9,09) max (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) a no. of min max 0.358 0.660 0.761 0.458 0.342 (8,69) min (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32) (18,78) ** 20 28 52 44 68 84 0.020 (0,51) terminals 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 12 13 14 15 16 18 17 11 10 8 9 7 5 4 3 2 0.020 (0,51) 0.010 (0,25) 6 1 28 26 27 19 21 b sq a sq 22 23 24 25 20 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) notes: a. all linear dimensions are in inches (millimeters). b. this drawing is subject to change without notice. c. this package can be hermetically sealed with a metal lid. d. the terminals are gold plated. e. falls within jedec ms-004
mechanical data msso002e ? january 1995 ? revised december 2001 post office box 655303 ? dallas, texas 75265 db (r-pdso-g**) plastic small-outline 4040065 /e 12/01 28 pins shown gage plane 8,20 7,40 0,55 0,95 0,25 38 12,90 12,30 28 10,50 24 8,50 seating plane 9,90 7,90 30 10,50 9,90 0,38 5,60 5,00 15 0,22 14 a 28 1 20 16 6,50 6,50 14 0,05 min 5,90 5,90 dim a max a min pins ** 2,00 max 6,90 7,50 0,65 m 0,15 0 ? 8 0,10 0,09 0,25 notes: a. all linear dimensions are in millimeters. b. this drawing is subject to change without notice. c. body dimensions do not include mold flash or protrusion not to exceed 0,15. d. falls within jedec mo-150
mechanical data mtss001c january 1995 revised february 1999 post office box 655303 ? dallas, texas 75265 pw (r-pdso-g**) plastic small-outline package 14 pins shown 0,65 m 0,10 0,10 0,25 0,50 0,75 0,15 nom gage plane 28 9,80 9,60 24 7,90 7,70 20 16 6,60 6,40 4040064/f 01/97 0,30 6,60 6,20 8 0,19 4,30 4,50 7 0,15 14 a 1 1,20 max 14 5,10 4,90 8 3,10 2,90 a max a min dim pins ** 0,05 4,90 5,10 seating plane 0 8 notes: a. all linear dimensions are in millimeters. b. this drawing is subject to change without notice. c. body dimensions do not include mold flash or protrusion not to exceed 0,15. d. falls within jedec mo-153
important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti?s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti?s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications amplifiers amplifier.ti.com audio www.ti.com/audio data converters dataconverter.ti.com automotive www.ti.com/automotive dsp dsp.ti.com broadband www.ti.com/broadband interface interface.ti.com digital control www.ti.com/digitalcontrol logic logic.ti.com military www.ti.com/military power mgmt power.ti.com optical networking www.ti.com/opticalnetwork microcontrollers microcontroller.ti.com security www.ti.com/security telephony www.ti.com/telephony video & imaging www.ti.com/video wireless www.ti.com/wireless mailing address: texas instruments post office box 655303 dallas, texas 75265 copyright ? 2005, texas instruments incorporated
|
