document number: 91340 www.vishay.com s10-1682-rev. a, 26-jul-10 1 power mosfet irfz20, SIHFZ20 vishay siliconix features ? extremely low r ds(on) ? compact plastic package ?fast switching ? low drive current ? ease of paralleling ? excellent temperature stability ? parts per million quality ? compliant to rohs directive 2002/95/ec description the technology has expanded it s product base to serve the low voltage, very low r ds(on) mosfet transistor requirements. vishays highly efficient geometry and unique processing have been combined to create the lowest on resistance per de vice performance. in addition to this feature all have documented reliability and parts per million quality! the transistor also offer all of the well established advantages of mosfets such as voltage control, very fast switching, ease of paralleling , and temperature stability of the electrical parameters. they are well suited for applications such as switching power supplies, motor controls , inverters, choppers, audio amplifiers, high energy pulse circuits, and in systems that are operated from low voltage batteries, such as automotive, portab le equipment, etc. notes a. t j = 25 c to 150 c b. repeditive rating : pulse width limited by max. junction temperature. see transient temperature impedance curve (see fig. 11 ). c. starting t j = 25 c, l = 0.07 mh, r g = 25 ? , i as = 12 a product summary v ds (v) 50 r ds(on) ( ? )v gs = 10 v 0.10 q g (max.) (nc) 17 q gs (nc) 9.0 q gd (nc) 3.0 configuration single n-channel mosfet g d s to-220ab g d s ordering information package to-220ab lead (pb)-free irfz20pbf SIHFZ20-e3 snpb irfz20 SIHFZ20 absolute maximum ratings parameter symbol limit unit drain-source voltage a v ds 50 v gate-source voltage a v gs 20 continuous drain current v gs at 10 v t c = 25 c i d 15 a t c = 100 c 10 pulsed drain current b i dm 60 single pulse avalanche energy c e as 5mj linear derating fa ctor (see fig. 16) 0.32 w/c maximum power dissipation (see fig. 16) t c = 25 c p d 40 w operating junction and storage temperature range t j , t stg - 55 to + 150 c soldering recommendations (peak temperatur e) for 10 s 300 (0.063" (1.6 mm) from case * pb containing terminations are not rohs compliant, exemptions may apply
www.vishay.com document number: 91340 2 s10-1682-rev. a, 26-jul-10 irfz20, SIHFZ20 vishay siliconix notes a. repeditive rating: pulse width limited by max. junction temperature. see transient temperature impedance curve (see fig. 5) . b. pulse test: pulse width ? 300 s; duty cycle ? 2 %. thermal resistance ratings parameter symbol typ. max. unit typical socket mount, junction-to-ambient r thja -80 c/w case-to-sink, mounting surfac e flat, smooth, and greased r thcs 1.0 - junction-to-case r thjc -3.12 electrical characteristics (t j = 25 c, unless otherwise noted) parameter symbol test condi tions min. typ. max. unit static drain-source brea kdown voltage v ds v gs = 0 v, i d = 250 a 50 - - v gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 2.0 - 4.0 v gate-source leakage i gss v gs = 20 v - - 500 na zero gate voltage drain current i dss v ds > max. rating, v gs = 0 v - - 250 a v ds = max. rating x 0.8, v gs = 0 v, t c = 125 c - - 1000 on-state drain current i d(on) v gs = 10 v v ds > i d(on) x r ds(on) max. - - 15 a drain-source on-state resistance b r ds(on) v gs = 10 v i d = 10 a - 0.080 0.10 ? forward transconductance b g fs v ds > i d(on) x r ds(on) max., i d = 9.0 a 5.0 6.0 - s dynamic input capacitance c iss v gs = 0 v, v ds = 25 v, f = 1.0 mhz, see fig. 11 - 560 860 pf output capacitance c oss - 250 350 reverse transfer capacitance c rss - 60 100 total gate charge q g v gs = 10 v i d = 20 a, v ds = 0.8 max. rating, see fig. 18 for test circuit (gate charge is essentially independent of operating temperature) -1217 nc gate-source charge q gs -9.0- gate-drain charge q gd -3.0- turn-on delay time t d(on) v dd = 25 v, i d = 9.0 a, z 0 = 50 ? , see fig. 5 b -1530 ns rise time t r -4590 turn-off delay time t d(off) -2040 fall time t f -1530 internal drain inductance l d modified mosfet symbol showing the internal device inductances -3.5- nh internal source inductance l s -4.5- drain-source body diode characteristics continuous source-dr ain diode current i s mosfet symbol showing the integral reverse p - n junction rectifier --15 a pulsed diode forward current a i sm --60 body diode voltage b v sd t c = 25 c, i s = 15 a, v gs = 0 v - - 1.5 v body diode reverse recovery time t rr t j = 150 c, i f = 15 a, di f /dt = 100 a/s - 100 - ns body diode reverse recovery charge q rr -0.4-c forward turn-on time t on intrinsic turn-on time is negligible (turn-on is dominated by l s and l d ) d s g s d g
document number: 91340 www.vishay.com s10-1682-rev. a, 26-jul-10 3 irfz20, SIHFZ20 vishay siliconix typical characteristics (25 c, unless otherwise noted) fig. 1 - typical output characteristics fig. 2 - typical saturation characteristics fig. 3 - typical transfer characteristics fig. 4 - normalized on-resistance vs. temperature
www.vishay.com document number: 91340 4 s10-1682-rev. a, 26-jul-10 irfz20, SIHFZ20 vishay siliconix fig. 5 - typical capacitance vs. drain-to-source voltage fig. 6 - typical gate charge vs. gate-to-source voltage fig. 7 - typical source-drain diode forward voltage fig. 8 - maximum safe operating area
document number: 91340 www.vishay.com s10-1682-rev. a, 26-jul-10 5 irfz20, SIHFZ20 vishay siliconix fig. 9 - maximum drain current vs. case temperature fig. 10a - switching time test circuit fig. 10b - switching time waveforms fig. 11 - maximum effective transient thermal impedance, junction-to-case vs. pulse duration fig. 12a - clamped inductive test circuit fig. 12b - unclamped inductive waveforms pulse width 1 s duty factor 0.1 % r d v gs r g d.u.t. 10 v + - v ds v dd v ds 90 % 10 % v gs t d(on) t r t d(off) t f i as v ds v dd v ds t p
www.vishay.com document number: 91340 6 s10-1682-rev. a, 26-jul-10 irfz20, SIHFZ20 vishay siliconix fig. 13 - typical transconductance vs. drain current fig. 14 - breakdown voltage vs. temperature fig. 15 - typical on-resistance vs. drain current fig. 16 - power vs. temperature derating curve fig. 17 - gate charge test circuit
document number: 91340 www.vishay.com s10-1682-rev. a, 26-jul-10 7 irfz20, SIHFZ20 vishay siliconix fig. 14 - for n-channel vishay siliconix maintains worldw ide manufacturing capability. prod ucts may be manufactured at on e of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents su ch as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?91340 . p.w. period di/dt diode recovery dv/dt ripple 5 % body diode forward drop re-applied voltage rever s e recovery current body diode forward current v gs = 10 v a i s d driver gate drive d.u.t. l s d waveform d.u.t. v d s waveform inductor current d = p.w. period + - + + + - - - peak dio d e recovery d v/ d t test circuit v dd ? dv/dt controlled by r g ? driver s ame type a s d.u.t. ? i s d controlled by duty factor d ? d.u.t. - device under te s t d.u.t. circuit layout con s ideration s ? low s tray inductance ? g round plane ? low leakage inductance current tran s former r g note a. v gs = 5 v for logic level device s v dd
package information www.vishay.com vishay siliconix revison: 02-nov-15 1 document number: 66542 for technical questions, contact: hvm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-220-1 note ? m* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for hvm m * 3 2 1 l l(1) d h(1) q ? p a f j(1) b(1) e(1) e e b c dim. millimeters inches min. max. min. max. a 4.14 4.70 0.163 0.185 b 0.69 1.02 0.027 0.040 b(1) 1.14 1.78 0.045 0.070 c 0.36 0.61 0.014 0.024 d 14.32 15.86 0.564 0.624 e 9.96 10.52 0.392 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 f 0.51 1.40 0.020 0.055 h(1) 6.10 6.70 0.240 0.264 j(1) 2.41 2.92 0.095 0.115 l 13.36 14.40 0.526 0.567 l(1) 3.33 4.05 0.131 0.159 ? p 3.53 3.94 0.139 0.155 q 2.54 3.00 0.100 0.118 ecn: x15-0339-rev. b, 02-nov-15 dwg: 6031
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
