View GT1-21PP-DS_9059928.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series ?connectors for coaxial cables < several types and configurations: in-line, board mounted, combinations of coaxial cable with signal/power. multi-position. > 7 features cost efficient termination highly efficient and reliable single motion crimp termination allows high volume production with semi- automatic equipment. lock-release latching system shock / vibration resistant electrical connections verification of the full contact insertion excellent shielding effects. excellent high frequency performance refer to v.s.w.r. data on the following pages. t ermination of coaxial cables in automotive, medical and instrumentation applications utilizes a single motion to crimp the center conductor, shield and outer insulator. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 8 b diagram of gt1 in-line type structure part number part number used material finish 1 gt1-1p-hu housing 1 pa(ul94v-0) ---- 2 insulator 1 pbt(ul94v-0) ---- 3 gt1-1p-2428/1.6c crimp terminal 1 brass tin plating 4 outer terminal 1 brass tin plating 5 gt1-1s-hu housing 1 pa(ul94v-0) ---- 6 insulator 1 pbt(ul94v-0) ---- 7 gt1-1s-2428/1.6c crimp terminal 1 phosphor bronze tin plating 8 outer terminal 1 brass tin plating b t est data (using semi-rigid cable) parts list 1 2 3 4 5 6 7 8 high frequency characteristics (v.s.w.r.) note: data taken using fully assemblied and connected gt1-1s-hu and gt1-1p-dsa. 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1 1.0 2.0 3.0gh z the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 9 b t ermination sequence part number cl no. l1 l2 l3 part number cl no. l1 l2 l3 gt1-1s-2428 / 1.6c gt1-1p-2428 / 1.6c gt1-1s-30 / 1.6c gt1-1p-30 / 1.6c gt1-1s-2022 / 2.9c gt1-1p-2022 / 2.9c 3.8 751-0001-3 751-0002-6 751-0029-2 751-0030-1 751-0015-8 751-0014-5 4.9 6.8 11.3 6 10.5 gt1-1s-30 / 2.9c gt1-1p-30 / 2.9c gt1-1s-2428 / f5c gt1-1p-2428 / f5c gt1-1s-30 / f5c gt1-1p-30 / f5c 4.9 6.8 11.3 strip length 1 crimp the cable to the terminal. 2 insert the terminal in the housing until is fully locked. 3 completion l3 l2 l1 751-0032-7 751-0031-4 751-0033-0 751-0034-2 751-0037-0 751-0038-3 coaxial cable terminal finish diagram the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6.2 10.4 indication of condductor size(awg) 24.25 5 8.8 23 indication of condductor size(awg) gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 10 t erminals for coaxial shielded cable item material finish insulator pbt color: dark gray crimp terminal brass tin plating outer terminal brass tin plating note: products marked with an asterisk (*) indicate polyethylene foam insulation. part number cl no. gt1-1p-2428 / 1.6c gt1-1p-30 / 1.6c gt1-1p-2022 / 2.9c gt1-1p-30 / 2.9c gt1-1p-2428 / f5c gt1-1p-30 / f5c gt1-1p-2428 / f4c 751-0002-6 751-0030-1 751-0014-5 751-0031-4 751-0034-2 751-0038-3 751-0047-4 inner insulator diameter outer diameter packaging 1.5 to 2.0mm 2.6 to 3.4mm 0, 800 2.8 to 3.5mm 2.5 to 3.5mm 4.0mm 0, 600 4.6 to 5.0mm note: products marked with an asterisk (*) indicate polyethylene foam insulation. part number 0, 800 gt1-1s-2428 / 1.6c gt1-1s-30 / 1.6c gt1-1s-2022 / 2.9c gt1-1s-30 / 2.9c gt1-1s-2428 / f5c gt1-1s-30 / f5c gt1-1s-2428 / f4c * * 751-0001-3 751-0029-2 751-0015-8 751-0032-7 751-0033-0 751-0037-0 751-0046-1 #24 to 28 or equivalent #30 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #30 or equivalent #24 to 28 or equivalent conductor size (awg) cl no. inner insulator diameter 1.5 to 2.0mm 2.6 to 3.4mm 4.6 to 5.0mm 2.8 to 3.5mm 2.5 to 3.5mm 4.0mm outer diameter packaging 1,200 #24 to 28 or equivalent #30 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #30 or equivalent #24 to 28 or equivalent conductor size (awg) f connector terminals m connector terminals * * item material finish insulator pbt color: dark gray crimp terminal brass tin plating outer terminal brass tin plating the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
22.9 24.1 15.4 12.8 8.35 27 15.4 19.5 15.9 27 17.8 gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 11 for single-conductor coaxial shielded cable 13.3 18 15.5 1.2 25.5 part number cl no. material color gt1-1s-hu 751-0003-9 pa light gray f connectors housing m connectors housing panel housing part number cl no. item material finish color housing pa ---- light gray gt1-1pp-hu 751-0007-0 ground plate brass tin plating ---- press fitting nut brass nickel ---- part number cl no. material color gt1-1p-hu 751-0004-1 pa light gray the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 12 part number cl no. item material finish color housing pbt ---- light gray insulator pbt ---- dark gray gt1-1p-ds 751-0006-7 0.64x1.1 terminal brass tin plating ---- outer terminal brass tin plating ---- ground terminal stainless ---- ---- for outer conductor 19 13.5 24 16.4 15.4 for inner conductor 2- for outer conductor 15.4 19 24 15.9 13.5 16.5 for inner conductor 2- 4- +0.1 0 use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 0.16mm) part number cl no. item material finish color housing pbt ---- light gray insulator pbt ---- dark gray gt1-1p-dsa 751-0005-4 0.64x1.1 terminal brass tin plating ---- outer terminal brass tin plating ---- use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 0.16mm) b recommended board mounting pattern printed circuit type (right angle through hole type) printed circuit type (straight through hole type) b recommended board mounting pattern the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
18.1 23.1 16 24.7 14.5 for outer conductor 14.85 24 5.08 19 19 15.6 18 4.9 for inner conductor 2- 5.5 25 13.1 13.5 gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 13 note: mates only with gt1k-1p-ds and gt1k-1pa-ds. * refer to page 14 for use of the gt1k-1p-hu retainer. note 1: mates only with gt1k-1s-hu. note 2: use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 0.16mm) for single-conductor coaxial shielded cable part number cl no. material color gt1k-1s-hu 751-0016-0 pbt light gray b shown with inserted retainer b recommended board mounting pattern part number cl no. item material finish color housing pbt ---- light gray insulator pbt ---- dark gray gt1k-1p-ds 751-0017-3 0.64x1.1 terminal brass tin plating ---- outer terminal brass tin plating ---- cover stainless nickel ---- for outer conductor panel 9.85 15 for inner conductor f connector housing (integrated retainer type) m connectors printed circuit board type (right-angle through hole, top lock type) printed circuit board type (right-angle through hole, side lock type) b recommended board mounting pattern note 1: mates only with gt1k-1s-hu. note 2: use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 0.16mm) part number cl no. item material finish color housing pbt ---- light gray insulator pbt ---- dark gray gt1k-1pa-ds 751-0035-5 0.64x1.1 terminal brass tin plating ---- outer terminal brass tin plating ---- the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 14 b method of using the gt1k-1s retainer a. insert so that the terminal locking tab is inserted between the top surface of the terminal and the housing. b. push in while changing the angle of the retainer until the front surface comes to a stop. c. press the rear portion of the retainer and snap it into the locked position. d. if locking is not complete, press the rear portion of the retainer again while pulling it backward. * check that all locations are locked. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
15.8 4 18.15 30.55 35.55 18.65 9.25 21.3 a configuration part number 18.1 25.5 27 gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 15 t wo-position type-each single-conductor coaxial cable part number cl number material color gt1-2s-hu (20) 751-0011-7 -20 light gray gt1-2s-hu(20) 751-0011-7-20 pbt orange gt1-2s-hu(21) 751-0011-7-21 blue note: retainer is optional. a configuration part number cl no. gt1-2s-33r gt1-2s-53r gt1-2s-55r 751-0045-9 751-0043-3 751-0044-6 material pbt white dark gray light blue o /3 o /5 o /5 o /3 o /3 o /5 color cable dia. o /a o /b b gt1-2s-hu shown with temporarily inserted retainer b gt1-2pp-hu shown with temporarily inserted retainer note: mount this item after provisional insertion into the housing, or after terminal insertion. part number cl number material color gt1-2p/s-r 751-0013-2 pbt dark gray note 1: this item should be mounted to the gt1-2pp-hu housing after the insertion of terminals. note 2: retainer is optional. f connectors housings retainers (used with gt1-2s-hu) b shown with inserted retainer retainer (used with gt1-2s-hu and gt1-2pp-hu) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 16 18.3 32 30.7 1 mounting bracket attachment side ground terminal a configuration part number cl no. gt1-2pp-33r gt1-2pp-53r gt1-2pp-55r 751-0042-0 751-0040-5 751-0041-8 white dark gray light blue o /3 o /5 o /5 o /3 o /5 o /3 color cable dia. o /a o /b material color white pbt dark gray light blue note 1: this item should be mounted to the gt1-2pp-hu housing after the insertion of terminals. note 2: retainer is optional. part number cl no. color remarks gt1-2pp-hu (10) 751-0010-4 -20 light gray with ground terminal gt1-2pp-hu(10) 751-0010-4-10 light gray without ground terminal gt1-2pp-hu(20) 751-0010-4-20 orange with ground terminal gt1-2pp-hu(21) 751-0010-4-21 blue with ground terminal gt1-2pp-hu(40) 751-0010-4-40 orange without ground terminal gt1-2pp-hu(41) 751-0010-4-41 blue without ground terminal note: retainer is optional. item material finish color: light gray housing pbt color: orange color: blue ground terminal brass tin plating 1.5 6.8 4.2 7.8 9.8 17.75 14.5 8 5 1.3 1.5 5 2.8 0.6 1 tin plating 1.6 b recommended mounting bracket dimensions (t=1.5mm) m connectors housings retainers (used with gt1-2pp-hu) 18.65 10.45 22.95 a configuration part number bracket mounting portion b shown with inserted retainer the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 17 part number gt7-1618pcf gt7-2022pcf gt7a-2022pcf 5,000 3,000 gt7-2022scf gt7a-2022scf 757-0001-1 757-0003-7 #20 to 22 #20 to 22 part number cl no. inner insulator diameter 1.4 to 2.4mm 2.6 to 3.1mm 19 dimension a packaging copper alloy material tin plating finish conductor size (awg) note 1: sold by the reel. (see above table for number of packaging.) note 2: this component is used only with applicable hrs housings. note 1: sold by the reel. (see above table for number of packaging.) note 2: this component is used only with applicable hrs housings. 19.0 2.3 2.8 20.7 2.7 2.8 * reserved for product expansion 757-0002-4 757-0004-0 #16 to 18 #20 to 22 #20 to 22 cl no. inner insulator diameter 1.8 to 2.7mm 1.4 to 2.4mm 2.6 to 3.1mm packaging 3,000 5,000 3,000 material brass finish tin plating conductor size (awg) power supply terminals f connector terminals m connector terminals 5,000 3,000 gt7-2022scf gt7a-2022scf 757-0001-1 757-0003-7 #20 to 22 #20 to 22 part number cl no. inner insulator diameter 1.4 to 2.4mm 2.6 to 3.1mm 19 dimension a packaging copper alloy material tin plating finish conductor size (awg) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 18 20.25 15.9 13.1 27 13.1 3.25 18.7 combination type (one single-conductor coaxial cables + one power contact) note: retainer is optional. part number cl no. material color gt1-1/1s-hu 751-0026-4 pbt light gray note: mount this item after provisional insertion into the housing, or after terminal insertion. part number cl number material color gt1-1/1s-r 751-0028-0 pbt dark gray f connectors housing retainer (used with gt1-1/1s-hu) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
18.7 20.5 13.7 21.1 33 mounting bracket attachment side gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 19 4.2 7.8 0.6 1 1.6 6.8 17.75 14.5 tin plating 8 5 5 2.8 1.5 13.1 16.8 3.25 part number cl no. remarks gt1-1 / 1pp-hu (00) 751-0025-1 -10 1.5mm with ground terminal gt1-1 / 1pp-hu(10) 751-0025-1-10 1.5mm without ground terminal gt1-1 / 1pp-hu(11) 751-0025-1-11 1.0mm with ground terminal note: used with separate retainer (gt1-1/1pp-r). note: mount this item after provisional insertion into the housing, or after terminal insertion. item material finish housing pbt light gray ground terminal phosphor bronze tin plating part number cl number material color gt1-1/1pp-r 751-0027-7 pbt dark gray b recommended mounting bracket dimensions (t=1.5mm) m connectors housings mounting bracket attachment side retainer (exclusively for gt1-1/1pp-hu) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
22.7 3.25 18.7 20.25 25.5 27 gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 20 combination type (two single-conductor coaxial cables + one power contact) note1: mates only with gt1-2/1pp-ds and gt1-2/1pp-hu. note2: used with separate retainer (gt1-2/1s-r). part number cl no. material color gt1-2/1s-hu 751-0019-9 pbt light gray note: mount this item after provisional insertion into the housing, or after terminal insertion. part number cl no. material color gt1-2/1s-r 751-0021-0 pbt dark gray f connectors housing retainer (used with gt1-2s-hu and gt1-2pp-hu) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
panel 8 15.9 19.1 19.75 4-r3.05 0.3 14.25 13.25 4.4 29.9 board 2-r1.2 m3 20.5 30.7 mounting bracket attachment side ground terminal 17 75 33 ground terminal 33.1 19.2 38.1 29.5 ground terminal 38.1 24.6 gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 21 22.25 3.25 16.8 note1: mates only with gt1-2/1s-hu. note2: used with separate retainer (gt1-2/1pp-r). item material finish housing pbt light gray ground terminal phosphor bronze tin plating part number cl no. remarks gt1-2/ 1pp-hu (00) 751-0018-6 -10 1.5mm with ground terminal gt1-2/ 1pp-hu(10) 751-0018-6-10 1.5mm without ground terminal gt1-2/ 1pp-hu(11) 751-0018-6-11 1.0mm with ground terminal 4.2 7.8 0.6 1 1.6 6.8 17.75 14.5 tin plating 8 5 5 2.8 1.5 note: mount this item after provisional insertion into the housing, or after terminal insertion. part number cl number material color gt1-2/1pp-r (22) 751-0020-8 -22 pbt dark gray part number cl no. part material finish color housing pbt ---- light gray ground terminal phosphor bronze tin plating ---- ground plate brass tin plating ---- gt1-2/1pp-ds 751-0022-3 tub terminal for ds 070 brass tin plating ---- 0.64x1.1 terminal brass tin plating ---- insulator pbt ---- dark gray outer terminal brass tin plating ---- note1: mates only with gt1-2/1pp-ds and gt1-2/1pp-hu. note 2: use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 1.6mm) m connectors housings mounting bracket attachment side b recommended mounting bracket dimensions (t=1.5mm) retainer (used with gt1-2/1pp-hu) printed circuit board type b recommended board mounting pattern b recommended panel cut-out the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
20.25 27 25.5 31.3 19.2 36.3 27.7 24.6 gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 22 products listed below are of the combination type (two terminals for use with single-conductor shielded cable + one power supply terminal) with key positions that differ from the products listed on previous pages 8 15.9 19.1 19.75 2-r1.2 12.25 0.3 14.25 31.3 11.45 1.6 23.9 28.1 board 4-r3.05 note1: mates only with gt1-2/1p-ds. note2: used with separate retainer. part number cl no. material color gt1-2/1s-hu(a) (21) 751-0024-9 -21 pbt light gray gt1-2/1s-hu(a)(21) 751-0024-9-21 pbt blue item material finish color --- - light gray housing pbt --- - blue 0.64x1.1 terminal brass tin plating ---- insulator pbt ---- dark gray outer terminal brass tin plating ---- tub terminal for ds 070 brass tin plating ---- note1: mates only with gt1-2/1s-hu(a). note 2: use mounting screws of m3 with nominal diameter 3l-6 (for a panel thickness of 1.6mm) part number cl no. color gt1-2/1p-ds (21) 751-0023-6 -21 light gray gt1-2/1p-ds(21) 751-0023-6-21 blue f connectors housings m connectors printed circuit board type b recommended board mounting pattern b recommended panel cut-out 8.25 18.4 max2 panel the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 23 b mating, cross-sectional view 36.3 25.5 38.3 a a gt1-2/1p-ds gt1-2/1s-hu(a) 30.7 25.5 46.9 a a gt1-2/1p-ds gt1-2/1s-hu gt1-2/1p-ds+gt1-2/1s-hu(a) 1 2 3 4 5 6 7 8 9 part number part number used 1 2 2 2 1 1 2 2 2 material pbt pbt brass brass pbt pbt pbt phosphor bronze brass finish ul94v-0 ul94v-0 tin plating tin plating ul94v-0 ul94v-0 ul94v-0 tin plating tin plating housing insulator 0.64 x 1.1 terminal outer terminal housing retainer insulator crimp terminal outer terminal gt1-2/1p-ds (a) gt1-2/1s-hu(a) gt1-2/1s-hu (a) gt1-1s-2428/1.6c currently, the gt7 series terminals are used for the power supply of the gt1 series combination type. see page 157 for details about the gt7 series. the coupled, cross-sectional view of the gt7 terminals of the gt1-2/1 series appears below. part number gt1-1/1s-hu gt1-2/1s-hu gt1-1/1pp-hu gt1-2/1pp-hu terminal gt7-2022scf, gt7a-2022scf gt7-2022pcf, gt7a-2022pcf 1 2 3 4 5 6 part number gt1-2/1pp-hu gt1-2/1pp-r gt7-2022pcf gt1-2/1s-hu gt1-2/1s-r gt7-2022scf examples of printed circuit board type and cable type mating, top view cross section aa example of cable-to-cable type cross section aa mating, top view the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 24 24.5 7.5 4.5 t=1 9.8 8 12 1.1 7.1 4.1 7.1 (3.8) 5.85 6.2 3.9 8.7 5.3 5.85 7.8 8.7 (5) 3.9 mounted condition installed note 1: this product can be attached to gt1-1pp-hu, gt1-1/1pp-hu, and gt1-2/1pp-hu. note 2: please use the tin plated item when making a ground connection. part number cl no. material finish gt-bk (01) 751-0039-6 -22 tin plating gt-bk(01) 751-0039-6-01 spcc zinc plating note: this product cannot be used with gt1k-1s-hu. part number cl no. item material finish top shield cover tin plating gt1-1s-1.6csb 751-0009-5 bottom shield cover spcc zinc plating note: the product normally has sufficient performance without using the shield plate; however, when used in especially high fre quency bands (e.g., 1 ghz and higher), use of the shield plate is recommended so that even higher shielding effectiveness may be obtained. part number cl no. item material finish top shield cover gt1-1p-1.6csb 751-0008-2 bottom shield cover brass tin plating accessories brackets (for m connector housing) f terminal shield cover m terminal shield plate mounted condition installed the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 9 gt 8 gt 15 gt 18w gt 12 gt 10 gt 7 gt 6w gt 3 gt 2 gt 19n gt 17 gt 14 gt 11 po5g gt 16 gt 13 gt 5 gt 1 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 25 automatic crimping machine item specification remarks specification 1.5ton stroke length 30mm number of strokes 200spm(50hz) 240spm(60hz) weight 75kg motor 0.2kw ac100v crimping speed 2000 to 4000 per day part number cm-105 specifications hand tool hand press b t ermination tools user's manuals are available. please ask your hirose electric account representative. * crimp height setting tables are available for each cable type. please contact your nearest hirose electric account representat ive. different cables will require different crimp height settings. gt1-1s-2428 / 1.6c gt1-1p-2428 / 1.6c gt1-1s-2022 / 2.2c gt1-1p-2022 / 2.2c gt1-1s-2022 / 2.9c gt1-1p-2022 / 2.9c gt1-1s-2428 / f5c gt1-1p-2428 / f5c gt1-1s-30 / 1.6c gt1-1p-30 / 1.6c applicator 105-gt1-1s-2428 applicator 105-gt1-1p-2428 applicator 105-gt1-1s-30(stranded wire) applicator 105-gt1-1s-30id(solid wire) applicator 105-gt1-1p-30(stranded wire) applicator 105-gt1-1p-30id(solid wire) applicator 105-gt1-2022 / 2.2s applicator 105-gt1-2022 / 2.2p applicator 105-gt1-2022 / 2.9s applicator 105-gt1-2022 / 2.9p applicator 105-gt1-2428 / f5cs(solid wire) applicator 105-gt1-2428 / f5cp(solid wire) gt1-ta2428 / 1.6shc gt1-ta2428 / 1.6phc 780-0001-9 780-0008-8 ---- ---- ---- ---- ---- ---- ---- ---- (note) gt1 table top twin crimper part no. cl no. applicator part no. hand tool part no. hand press part no. harness tools the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
gt 1 gt 5 gt 13 gt 16 po5g gt 11 gt 14 gt 17 gt 19n gt 2 gt 3 gt 6w gt 7 gt 10 gt 12 gt 18w gt 15 gt 8 gt 9 coaxial cable connection of antennas, sensors, and communication trunk lines gt1 series 26 1) for one lance 2) for two lances 18 68 64 1 insert the extraction tool from the coupling end. 2 push the lance upward and pull out the terminal. 1 insert the extraction tool from the coupling end. 2 push and separate both lances and pull out the terminal. b t erminal extraction tool part number cl no. used with connectors gt-po(a) 780-0006-2 gt1k-1s-hu gt1-2s-hu gt1-2pp-hu gt1-1/1s-hu gt1-1/1pp-hu gt1-2/1s-hu gt1-2/1pp-hu gt1-2/1s-hu(a) part number cl no. used with connectors gt1-c-po 902-5020-1 gt1-1s-hu gt1-1p-hu gt1-1pp-hu the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.

▲Up To Search▲

Price & Availability of GT1-21PP-DS

	To Download GT1-21PP-DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .