EV6513L-J-00A 0.6a, 5.5v full h-bridge motor driver evaluation board mps confidential / internal use only / do not distribute EV6513L-J-00A rev. 1.0 www.monolithicpower.com 1 10/31/2016 mps proprietary information. patent protec ted. unauthorized photocopy and duplication prohibited. ? 2016 mps. all rights reserved. the future of analog ic technology description the EV6513L-J-00A is an evaluation board for the mp6513lgj, is a full-h-bridge motor driver used for driving reversible motors, which can drive one dc motor or one winding of a stepper motor or other loads. it operates from a supply voltage range of 2.5v to 5.5v and can deliver motor current up to 0.6a. the input control signals for the mp6513lgj are applied through the connector. electrical specifications parameter symbol value units input voltage v cc 2.5-5.5 v maximum output current i out 0.6 a features ? wide 2.5v to 5.5v input voltage range ? 0.6a continuous driver current ? full-h-bridge motor drive ? ocp, ovp, and otp applications ? cameras ? toys ? consumer products ? medical devices a ll mps parts are lead-free, halogen free, and adhere to the rohs directive. fo r mps green status, please visit mps website under quality assurance. ?mps? and ?the future of analog ic technology? are registered trademarks o f monolithic power systems, inc. EV6513L-J-00A evaluation board (l x w x h) 6.35cm x 6.604cm x 1.8cm board number mps ic number EV6513L-J-00A mp6513lgj
EV6513L-J-00A 0.6a, 5.5v full h-bridge motor driver ev board mps confidential / internal use only / do not distribute EV6513L-J-00A rev. 1.0 www.monolithicpower.com 2 10/31/2016 mps proprietary information. patent protec ted. unauthorized photocopy and duplication prohibited. ? 2016 mps. all rights reserved. evaluation board schematic mp6513l vcc in1 in2 out1 out2 gnd vcc gnd gnd gnd ain1 ain2 ain1 ain2 1 2 3 4 5 6 gnd aout1 aout2 1 2 1 2 ainput aout ain1 ain2 vcc gnd pgnd pgnd2 vcc 1 2 vcc gnd cn1 u1 mp6513l r1 r2 50 50 c4 c5 100pf 100pf c1 c3 1uf/25v 68uf/25v mp6513l vcc in1 in2 out1 out2 gnd vcc gnd gnd gnd bin1 bin2 bin1 bin2 1 2 3 4 5 6 gnd bout1 bout2 1 2 1 2 bout bin1 bin2 u2 r3 r4 50 50 c6 c7 100pf 100pf c2 1uf/25v mp6513l binput figure 1 .schematic of evb
EV6513L-J-00A 0.6a, 5.5v full h-bridge motor driver ev board mps confidential / internal use only / do not distribute EV6513L-J-00A rev. 1.0 www.monolithicpower.com 3 10/31/2016 mps proprietary information. patent protec ted. unauthorized photocopy and duplication prohibited. ? 2016 mps. all rights reserved. EV6513L-J-00A bill of materials qty ref value description package manufacturer part number 2 c1,c2 1 f/25v ceramic capacitor; 25v;x7r 0805 murata grm21br71e105ka99l 1 c3 68 f/25 v ceramic capacitor;50v dip panasonic eeu-fcih680 4 c4,c5,c6,c7 100pf ceramic capacitor; 50v;c0g; 0603 murata grm1885c1h101ja01d 4 r1, r2, r3,r4 49.9 film resistor;1% 0603 yageo rc0603fr-071kl 3 cn1, cn2, cn3 conn/2pin/5. 08mm dip 2 ainput, binput,ain1, ain2, bin1, bin2, gnd conne ctor sip 2.54mm * 40 pin connector radial any 2 jp1,jp2 conne ctor sip 2.54mm * 40 pin connector radial any 8 aout1, bout1, aout2, bout2,gnd* 3,vcc tp 1mm gold plated test point radial any 2 u1,u2 mp6513l gj mp6513lgj r6 fctsot23-6 mps mp6513lgj
EV6513L-J-00A 0.6a, 5.5v full h-bridge motor driver ev board mps confidential / internal use only / do not distribute EV6513L-J-00A rev. 1.0 www.monolithicpower.com 4 10/31/2016 mps proprietary information. patent protec ted. unauthorized photocopy and duplication prohibited. ? 2016 mps. all rights reserved. printed circuit board layout figure 2 .top layer figure 3 .bottom layer
EV6513L-J-00A 0.6a, 5.5v full h-bridge motor driver ev board mps confidential / internal use only / do not distribute notice: the information in this document is subject to change wi thout notice. users should warra nt and guarantee that third party intellectual property rights are not infringed upon w hen integrating mps products into any application. mps will not assume any legal responsibility for any said applications. EV6513L-J-00A rev. 1.0 www.monolithicpower.com 5 10/31/2016 mps proprietary information. patent protec ted. unauthorized photocopy and duplication prohibited. ? 2016 mps. all rights reserved. quick start guide this board is set up from the fact ory for 2.5v to 5.5v operation. figure 3. input and output terminals of EV6513L-J-00A 1. applications this evaluation board can be used to control two single-phase dc motor independently or a stepper motor by corresponding input signals. the recommended supply voltage is range from 2.5v to 5.5v, and the maximum drive current is up to 0.6a for one channel. 2. input logic the mp6513l is controlled using a pwm input interface, each output is controlled by a corresponding input pin. the following truth table shows the control logic for mp6513l: in1 in2 out1 out2 function (dc motor) l l z z coast l h l h reverse h l h l forward h h l l brake 3. setup condition a. preset power supply of 2.5v to 5.5v between vcc and gnd pins on cn1 terminal. b. the connector ainput/binput should be connected to input signals, and refer above table to find the corresponding control logic. c. the connector cn2/cn3 should be connected to the motor winding terminals. for a stepper motor, one winding should be connected to cn2(aout1/aout2), while the other should be connected to cn3(bout1/bout2). d. turn on power supply.
|
