technical data sheet cable clamp slc c 1 x1 - c0 5 rosenberger hochfrequenztechnik gmbh & co. kg , germany rosenberger asia pacific electronic co., ltd., china page tel.: +49 8684 18 - 0 tel.: +86 10 80481995 fax: + 86 10 8 0497052 www.rosenberger.de email: info@rosenberger.de www.rosenberger ap .com email: info@rosenberger ap .com 1 / 2 rf_35/06.07/5.0 part number l picture slcc 11 1 - c0 5 9 0 slcc 1 2 1 - c0 5 13 0 slcc 1 3 1 - c0 5 16 0 all dimensions are in mm, tolerances acc. to iso 2768 c - h description to install multiple cable runs on towers where space is limited. without additional adapters, these clamps can provide sturdy, reliable, long - term support by means of tough and uv resistant material. part number slcc 1 x1 - c0 5 cable clamp for 7/8 cables x: number of cables
technical data sheet cable clamp slc c 1 x1 - c0 5 rosenberger hochfrequenztechnik gmbh & co. kg , germany rosenberger asia pacific electronic co., ltd., china page tel.: +49 8684 18 - 0 tel.: +86 10 80481995 fax: + 86 10 8 0497052 www.rosenberger.de email: info@rosenberger.de www.rosenberger ap .com email: info@rosenberger ap .com 2 / 2 rf_35/06.07/5.0 parts list number piece parts material 1 threaded rod m8xl stainless steel sus304 2 nut m8 stainless steel sus304 3 plain washer stainless steel sus304 4 plastic cable clamp polypropylene 5 c - frame stainless steel sus304 6 bowl washer stainless steel sus304 7 spring washer stainless steel sus304 8 bolt m8x45 stainless steel sus304 environmental data temperature - 55 c to +7 5 c salt spray test 300 hr. acc. to mil - std - 1344:1977 method 1001.1 uv resistance 300 hr. acc. to iso 4892 - 2:2006(e) method a rohs compliant tooling hex wrench 13 mm packaging standard 1 pc e in bag part number weight / pce slcc 11 1 - c 0 5 1 8 0 g slcc 1 2 1 - c0 5 23 0 g slcc 1 3 1 - c0 5 28 0 g draft date approved date rev. engineering change number name date robin 08/09/2010 j. gramsamer 28/01/16 d00 16 - 0148 s. lang 28.01.16 while the information h as been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we rese rve the right to make changes judged to be necessary.
|
