80714hk tc-00003142/52214tkim no.a2301-1/5 semiconductor components industries, llc, 2014 august, 2014 http://onsemi.com ordering information see detailed ordering and shipping inform ation on page 2 of this data sheet. CPH3459 features ? on-resistance r ds (on)1=2.8 ? (typ) ? input capacitance ciss=90pf (typ) ? 4v drive ? protection diode in ? halogen free compliance specifications absolute maximum ratings at ta = 25 ? c parameter symbol conditions value unit drain to source voltage v dss 200 v gate to source voltage v gss ? 20 v drain current (dc) i d 0.5 a drain current (pulse) i dp pw ? 10 ? s, duty cycle ? 1% 2 a power dissipation p d when mounted on ceramic substrate (900mm 2 ? 0.8mm) 1.0 w junction temperature tj 150 ? c storage temperature tstg ? 55 to +150 ? c thermal resistance ratings parameter symbol value unit junction to ambient r ? j a 125 ? c/w when mounted on ceramic substrate (900mm 2 ? 0.8mm) electrical characteristics at ta ? 25 ? c parameter symbol conditions value unit min typ max drain to source breakdown voltage v( br ) dss i d =1ma, v gs =0v 200 v zero-gate voltage drain current i dss v ds =200v, v gs =0v 1 ? a gate to source leakage current i gss v gs =16v, v ds =0v ? 10 ? a gate threshold voltage v gs (th) v ds =10v, i d =1ma 1.2 2.6 v forward transconductance g fs v ds =10v, i d =0.25a 0.8 s static drain to source on-state resistance r ds (on)1 i d =0.25a, v gs =10v 2.8 3.7 ? r ds (on)2 i d =0.25a, v gs =4v 2.9 4.1 ? continued on next page. orderin g numbe r : ena2301a power mosfet 200v, 3.7 ? , 0.5a, single n-channel stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should n ot be assumed, damage may occur and reliability may be affected. product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product per formance may not be indicated by the electrical characteristics if operated under different conditions.
CPH3459 no.a2301-2/5 continued from preceding page. parameter symbol conditions value unit min typ max input capacitance ciss v ds =20v, f=1mhz 90 pf output capacitance coss 10 pf reverse transfer capacitance crss 6 pf turn-on delay time t d (on) see specified test circuit 4 ns rise time t r 3.5 ns turn-off delay time t d (off) 14 ns fall time t f 45 ns total gate charge qg v ds =100v, v gs =10v, i d =0.5a 2.4 nc gate to source charge qgs 0.3 nc gate to drain ?miller? charge qgd 0.8 nc forward diode voltage v sd i s =0.5a, v gs =0v 0.82 1.2 v ordering & package information packing type:tl marking device package shipping note CPH3459-tl-w cph3, sc-59 sot-23, to-236 3,000 pcs. / reel pb-free and halogen free electrical connection sw itching time test circuit product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product per formance may not be indicated by the electrical characteristics if operated under different conditions. tl lr lot no. 1 2 3
CPH3459 no.a2301-3/5
CPH3459 no.a2301-4/5
CPH3459 ps no.a2301-5/5 package dimensions CPH3459-tl-w cph3 case 318ba issue o unit : mm 1 : gate 2 : source 3 : drain recommended soldering footprint note on usage : since the CPH3459 is a mosfet product, pl ease avoid using this device in the vicinity of highly charged objects. 0.6 2.4 0.95 0.95 1.4 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc) or its subsidiaries in the united st ates and/or other countries. scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a lis ting of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . scillc reserves the right to make changes with out further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specific ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated fo r each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc pro ducts are not designed, intended, or authorized for use as com ponents in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees ar ising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that sci llc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject t oall applicable copyright laws and is not for resale in any manner.
|
