1 publication order number : sft1345/d www.onsemi.com ? semiconductor components industries, llc, 2016 february 2016 - rev. 1 sft1345 power mosfet ?100v, 275m ? , ?11a, single p-channel this p-channel power mosfet is produced using on semiconductor?s trench technology, which is specifically designed to minimize gate charge and low on resistance. this device is suitable for applications with low gate charge driving or low on resistance requirements. features ? low on-resistance ? 4v drive ? 100% avalanche tested ? ? esd diode-protected gate ? pb-free, halogen free and rohs compliance typical applications ? reverse battery protection ? load switch specifications absolute maximum rating at ta = 25 ? c (note 1, 2) parameter symbol value unit drain to source voltage v dss ? 100 v gate to source voltage v gss ? 20 v drain current (dc) i d ? 11 a drain current pw ? 10 ? s, duty cycle ? 1% i dp ? 44 a power dissipation p d 1.0 w tc=25 ? c 35 w junction temperature tj 150 ? c storage temperature tstg ? 55 to +150 ? c note 1 : stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. thermal resistance ratings parameter symbol value unit junction to case steady state r ? jc 3.57 ? c/w junction to ambient (note 2) r ? ja 125 note 2 : insertion mounted 1 3 2,4 1:gate 2:drain 3:source 4:drain tl t1345 lot no. v dss r ds (on) max i d max ? 100v 275m ? @ ? 10v ? 11a 315m ? @ ? 4.5v 330m ? @ ? 4v ipak(tp) 1 2 3 4 electrical connection p-channel packing type : tl marking ordering information see detailed ordering and shipping information on page 6 of this data sheet. dpak(tp-fa) 4 1 2 3
sft1345 www.onsemi.com 2 electrical characteristics at ta ? 25 ? c (note 3) parameter symbol conditions value unit min typ max drain to source breakdown voltage v( br ) dss i d = ? 1ma, v gs =0v ? 100 v zero-gate voltage drain current i dss v ds = ? 100v, v gs =0v ? 1 ? a gate to source leakage current i gss v gs = ? 16v, v ds =0v ? 10 ? a gate threshold voltage v gs (th) v ds = ? 10v, i d = ? 1ma ? 1.2 ? 2.6 v forward transconductance g fs v ds = ? 10v, i d = ? 5.5a 8.5 s static drain to source on-state resistance r ds (on)1 i d = ? 5.5a, v gs = ? 10v 210 275 m ? r ds (on)2 i d = ? 3a, v gs = ? 4.5v 225 315 m ? r ds (on)3 i d = ? 3a, v gs = ? 4v 235 330 m ? input capacitance ciss v ds = ? 20v, f=1mhz 1020 pf output capacitance coss 72 pf reverse transfer capacitance crss 43 pf turn-on delay time t d (on) see specified test circuit 9.5 ns rise time t r 25 ns turn-off delay time t d (off) 105 ns fall time t f 55 ns total gate charge qg v ds = ? 50v, v gs = ? 10v, i d = ? 11a 21 nc gate to source charge qgs 3.6 nc gate to drain ?miller? charge qgd 4.5 nc forward diode voltage v sd i s = ? 11a, v gs =0v ? 0.93 ? 1.5 v note 3 : product parametric performance is indicated in the elec trical characteristics for the listed test conditions, unless o therwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. switching time test circuit pw=10 ? s d.c. 1% p. g 50 ? g s d i d =--5.5a r l =9.1 ? v dd = - - 5 0v v out v in 0v -- 1 0 v v in sft1345
sft1345 www.onsemi.com 3
sft1345 www.onsemi.com 4
sft1345 www.onsemi.com 5 dpak / tp-fa case 369ah issue o to package dimensions unit : mm 1 : gate 2 : drain 3 : source 4 : drain recommended soldering footprint 7.0 1.5 2.3 2.0 2.5 2.3 7.0
sft1345 www.onsemi.com 6 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc) or its subsidiaries in the united st ates and/or other countries. scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a lis ting of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . scillc reserves the right to make changes with out further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specific ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated fo r each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc pro ducts are not designed, intended, or authorized for use as com ponents in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees ar ising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that sci llc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject t oall applicable copyright laws and is not for resale in any manner. ipak / tp case 369aj issue o package dimensions unit : mm 1 : gate 2 : drain 3 : source 4 : drain ordering information device marking package shipping (qty / packing) SFT1345-H t1345 ipak / tp (pb-free / halogen free) 500 / bag sft1345-tl-h t1345 dpak / tp-fa (pb-free / halogen free) 700 / tape & reel ? for information on tape and reel specifications, including part orientation and tape sizes, plea se refer to our tape and reel packaging specifications brochure, brd8011/d. http://www.ons emi.com/pub_link/collateral/brd8011-d.pdf note on usage : since the sft1345 is a mosfet product, pl ease avoid using this device in the vicinity of highly charged objects.
|
