vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 1 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 add-a-pak gen 7 power modules standard diodes, 100 a mechanical description the add-a-pak gen 7, new generation of add-a-pak module, combines the excelle nt thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structur e with minimized number of interfaces. features ? high voltage ? industrial standard package ? ul approved file e78996 ? low thermal resistance ? designed and qualified for industrial level ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 benefits ? excellent thermal performances obtained by the usage of exposed direct bonded copper substrate ? up to 1600 v ? high surge capability ? easy mounting on heatsink electrical description these modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, ups and battery charger. product summary i f(av) 100 a type modules - diode, high voltage package add-a-pak gen 7 circuit two diodes doubler ci rcuit, two diodes common cathode, two diodes common anode, single diode add-a-pak major ratings and characteristics symbol characteristics values units i f(av) 112 c 100 a i f(rms) 157 i fsm 50 hz 2020 60 hz 2115 i 2 t 50 hz 20.41 ka 2 s 60 hz 18.63 i 2 ? t 204.1 ka 2 ? s v rrm range 400 to 1600 v t j -40 to +150 c t stg
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 2 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical specifications voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = 150 c ma vs-vsk.91 04 400 500 10 06 600 700 08 800 900 10 1000 1100 12 1200 1300 14 1400 1500 16 1600 1700 forward conduction parameter symbol test conditions values units maximum average forward current at case temperature i f(av) 180 conduction, half sine wave 100 a 112 c maximum rms forward current i f(rms) dc at 90 c case temperature 157 a maximum peak, one-cycle forward, non-repetitive surge current i fsm t = 10 ms no voltage ? reapplied sinusoidal half wave, ? initial t j = t j maximum 2020 t = 8.3 ms 2115 t = 10 ms 100 % v rrm ? reapplied 1700 t = 8.3 ms 1780 maximum i 2 t for fusing i 2 t t = 10 ms no voltage ? reapplied 20.41 ka 2 s t = 8.3 ms 18.63 t = 10 ms 100 % v rrm ? reapplied 14.44 t = 8.3 ms 13.18 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 204.1 ka 2 ? s low level value of threshold voltage v f(to)1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 0.76 v high level value of threshold voltage v f(to)2 (i > ? x i f(av) ), t j = t j maximum 0.89 low level value of forward ? slope resistance r f1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 2.4 m ? high level value of forward ? slope resistance r f2 (i > ? x i f(av) ), t j = t j maximum 2.05 maximum forward voltage drop v fm i fm = ? x i f(av) , t j = 25 c, t p = 400 s square wave 1.55 v blocking parameter symbol test conditions values units maximum peak reverse ? leakage current i rrm t j = 150 c 10 ma maximum rms insulation voltage v ins 50 hz 3000 (1 min) 3600 (1 s) v
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 3 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? table shows the increment of thermal resistance r thjc when devices operate at different conduction angles than dc thermal and mechanical specifications parameter symbol test conditions values units junction and storage temperature range t j , t stg -40 to +150 c maximum internal th ermal resistance, ? junction to case per leg r thjc dc operation 0.22 c/w typical thermal resistance, ? case to heatsink per module r thcs mounting surface flat, smooth and greased 0.1 mounting torque 10 % to heatsink a mounting compound is recommended and the torque should be rechecked after a period of ? 3 hours to allow for the spread of the compound. 4 nm busbar 3 approximate weight 75 g 2.7 oz. case style jedec ? add-a-pak gen 7 (to-240aa) ? r conduction per junction devices sine half wave conduction rectangular wave conduction units 180 120 90 60 30 180 120 90 60 30 vsk.91 0.057 0.068 0.087 0.12 0.177 0.045 0.073 0.093 0.123 0.178 c/w
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 4 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rati ngs characteristics fig. 2 - current rati ngs characteristics fig. 3 - forward power loss characteristics fig. 4 - on-state powe r loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current average forward current (a) maximum allowable case temperature (c) 0 20406080100120 100 110 120 130 140 150 180 120 90 60 30 rthjc (dc) = 0.22c/w average forward current (a) maximum allowable case temperature (c) 0 50 100 150 200 90 100 110 120 130 140 150 180 120 90 60 30 rthjc (dc) = 0.22c/w dc average forward current (a) maximum average forward power loss (w) 020406080100120 0 20 40 60 80 100 120 140 160 180 120 90 60 30 rms limit per leg, tj = 150c average forward current (a) maximum average forward power loss (w) 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 180 200 180 120 90 60 30 rms limit dc per leg, tj = 150c peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 110100 400 600 800 1000 1200 1400 1600 1800 at any rated load condition and with rated vrrm applied following surge initial tj = tj max @ 60 hz 0.0083 s @ 50 hz 0.0100s per leg peak half sine wave forward current (a) pulse train duration (s) 0.01 0.1 1 200 400 600 800 1000 1200 1400 1600 1800 2000 maximum non-repetitive surge current versus pulse train duration initial tj = 150c no voltage reapplied rated vrrm reapplied per leg
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 5 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward power loss characteristics fig. 8 - forward power loss characteristics fig. 9 - forward power loss characteristics total rms output current (a) maximum total forward power loss (w) maximum allowable ambient temperature (c) 0 20 40 60 80 100 120 140 160 0 0 0 0 0 0 0 0 0 rthsa = 0.1 c/w 0.3 c/w 0.5 c/w 0.7 c/w 1 c/w 1.5 c/w 3 c/w 0 20406080100120140160 0 20 40 60 80 100 120 140 160 180 200 180 (sine) vsk.91 series per leg tj = 150c dc total output current (a) maximum total power loss (w) 0 20 40 60 80 100 120 140 160 rthsa = 0.2 c/w 0.3 c/w 0.4 c/w 0.5 c/w 0.7 c/w 1 c/w 1.5 c/w 3 c/w maximum allowable ambient temperature (c) 0 50 100 150 200 0 100 200 300 400 500 600 700 180 (sine) 180 (rect) 2 x vsk.91 series single phase bridge connected tj = 150c total output current (a) maximum allowable ambient temperature (c) maximum total power loss (w) 0 20 40 60 80 100 120 140 160 rthsa = 0.1 c/w 0.2 c/w 0.3 c/w 0.5 c/w 0.7 c/w 1 c/w 3 c/w 0 50 100 150 200 250 300 0 100 200 300 400 500 600 700 800 900 120 (rect) 3 x vsk.91 series three phase bridge connected tj = 150c
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 6 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 10 - forward voltage characteristics fig. 11 - thermal impedance z thjc characteristics ordering information table note ? to order the optional hardware go to www.vishay.com/doc?95172 instantaneous forward voltage (v) instantaneous forward current (a) 0 0.51.01.52.02.53.0 1 10 100 1000 tj = 25c tj = 150c per leg square wave pulse duration (s) transient thermal impedance z thjc (c/w) 0.001 0.01 0.1 1 10 0.01 0.1 1 steady state value rthjc = 0.22 c/w (dc operation) per leg - module type - circuit configuration (see circuit configuration table) - current code (100 a) - voltage code (see voltage ratings table) device code kd91/16 1 - vishay semiconductors product 2 3 4 5 5 2 1 4 3 vs-vs
vs-vskd91.., VS-VSKC91.., vs-vskj91.., vs-vske91.. www.vishay.com vishay semiconductors revision: 05-apr-16 7 document number: 94627 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 circuit configuration circuit description circuit configuration code circuit drawing two diodes doubler circuit d two diodes common cathode c two diodes common anode j single diode e links to related documents dimensions www.vishay.com/doc?95369 v s kd... ~ (1) (3) (2) - + 1 2 3 +- - v s kc... (1) (3) (2) 1 2 3 - + + v s kj... (1) (3) (2) 1 2 3 v s ke... 1 2 3 - + (3) (1) (2)
document number: 95369 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 11-nov-08 1 add-a-pak generation vii - diode outline dimensions vishay semiconductors dimensions in millimeters (inches) 35 ref. 30 0.5 (1.18 0.020) 29 0.5 (1 0.020) viti m5 x 0.8 screws m5 x 0.8 18 (0.7) ref. 6.7 0.3 (0.26 0.012) 24 0.5 (1 0.020) 1 2 3 4 5 7 6 80 0.3 (3.15 0.012) 92 0.75 (3.6 0.030) 20 0.5 (0.79 0.020) 20 0.5 (0.79 0.020) 15 0.5 (0.59 0.020) 22.6 0.2 (0.89 0.008) 6.3 0.2 (0.248 0.008)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
