part number: XZM2CRKM2DGFBB45SCCB 3.5x2.8mm plcc4 smd led sep 16, 2016 xdsb7866 v2-z layout: maggie l. p. 1/5 features ideal for indication light on hand held products long life and robust package standard package: 2000pcs/ reel msl (moisture sensitivity level): 3 rohs compliant. attention observe precautions for handling electrostatic discharge sensitive devices package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. part number emitting color emitting material lens-color wavelength cie127-2007* nm p viewing angle 2 1/2 min. typ. XZM2CRKM2DGFBB45SCCB red algainp water clear 400* 497* 640* 120 green ingan 1000* 1590* 520* blue ingan 200* 327* 465* luminous intensity cie127-2007* (i f =20ma) mcd absolute maximum ratings (t a =25c) red (algain p) green (ingan) blue (ingan) unit reverse voltage v r 5 5 5 v forward current i f 50 30 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 100 100 ma power dissipation p d 140 120 120 mw 3000 450 250 v operating temperature t a -40 ~ +85 c storage temperature tstg electrostatic discharge threshold (hbm) red (algain p) green (inga n) blue (inga n) unit forward voltage (typ.) (i f =20ma) v f 2.2 3.2 3.3 v forward voltage (max.) (i f =20ma) v f 2.8 4.0 4.0 v reverse current (max.) (v r =5v) i r 10 50 50 ua wavelength of peak emission cie127-2007* (typ.) (i f =20ma) p 640* 520* 465* nm wavelength of dominant emission cie127-2007* (typ.) (i f =20ma) d 625* 525* 470* nm spectral line full width at half-maximum (typ.) (i f =20ma) 20 35 22 nm capacitance (typ.) (v f =0v, f=1mhz) c 27 100 100 pf operating characteristics (t a =25c) *luminous intensity value and wavelength are in accordance with cie127-2007 standards. a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/jesd625-a and jedec/j-std-033)
part number: XZM2CRKM2DGFBB45SCCB 3.5x2.8mm plcc4 smd led sep 16, 2016 xdsb7866 v2-z layout: maggie l. p. 2/5 handling precautions compare to epoxy encapsulant that is hard and brittle, si licone is softer and flexible. although its characteristic significantly reduces thermal stress, it is more susc eptible to damage by external mechanical force. as a result, special handling precautions need to be ob served during assembly using silicone encapsulated led products. failure to comply might lead to damage and premature failure of the led. 1. handle the component along the side surfaces by using forceps or appropriate tools. 2. do not directly touch or handle the silicone lens surface. it may damage the internal circuitry. 3. do not stack together assembled pcbs containing exposed leds. impact may scratch the silicone lens or damage the internal circuitry. 4.1. the inner diameter of the smd pickup nozzle should not exceed the size of the led to prevent air leaks. 4.2. a pliable material is suggested for the nozzle tip to av oid scratching or damaging the led surface during pickup. 4.3. the dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. as silicone encapsulation is permeable to gases, some corrosive substances such as h 2 s might corrode silver plating of leadframe. special care should be taken if an led with si licone encapsulation is to be used near such substances.
part number: XZM2CRKM2DGFBB45SCCB 3.5x2.8mm plcc4 smd led sep 16, 2016 xdsb7866 v2-z layout: maggie l. p. 3/5 ? red ? green ? blue blue green red
part number: XZM2CRKM2DGFBB45SCCB 3.5x2.8mm plcc4 smd led sep 16, 2016 xdsb7866 v2-z layout: maggie l. p. 4/5 remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? led is recommended for reflow soldering and soldering profile is shown below. ? the device has a single mounting surface. the device must be mounted according to the specifications. ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) ? reel dimension
part number: XZM2CRKM2DGFBB45SCCB 3.5x2.8mm plcc4 smd led sep 16, 2016 xdsb7866 v2-z layout: maggie l. p. 5/5 packing & label specifications terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp ?
|
