unisonic technologies co., ltd UMT1N preliminary dual transistor www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r218-025.a general purpose transistor ? description the utc UMT1N is a dual transistor, including two pnp transistors. it uses utc?s advanced technology to provide the customers with high dc current gain, etc. ? features * high dc current gain (h fe >120@v ce =-6v, i c =-1ma) ? equivalent circuits ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 4 5 6 UMT1Nl-al6-r UMT1Ng-al6-r sot-363 e1 b1 c2 e2 b2 c1 tape reel ? marking t1n 12 3 4 5 6 l: lead free g: halogen free
UMT1N preliminary dual transistor www.unisonic.com.tw 2 of 3 copyright ? 2013 unisonic technologies co., ltd ver.a ? absolute maximum ratings (t a =25c) parameter symbol ratings unit collector-base voltage v cbo -60 v collector-emitter voltage v ceo -50 v emitter-base voltage v ebo -6 v collector current i c -0.15 a (dc) collector power dissipation pc 0.15 w junction temperature t j 150 c storage temperature t stg -55~150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25c) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =-50a -60 v collector-emitter breakdown voltage bv ceo i c =-1ma -50 v emitter-base breakdown voltage bv ebo i e =-50a -6 v collector cutoff current i cbo v cb =-60v -0.1 a emitter cutoff current i ebo v eb =-6v -0.1 a collector-emitter satu ration voltage v ce ( sat ) i c /i b =-50ma/-5ma -0.5 v dc current transfer ratio h fe v ce =-6v, i c =-1ma 120 560 transition frequency f t v ce =-12v, i e =2ma, f=100mhz 140 mhz output capacitance cob v cb =-12v, i e =0a, f=1mhz 4 5 pf
UMT1N preliminary doual transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r218-025.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
