termination insensitive mixer, 1 mhz - 3.5 ghz md-/mdc-/mds-169 m/a-com inc. and its affiliates reserve the right t o make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-c om assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v5 1 features ? intermodulation ratio is insensitive to port mismatches ? vswr: <2.0:1 typical midband ? isolation: 35 db typical midband ? impedance: 50 ohms nominal ? maximum input power: 350 mw max @ 25c, derated to 85c @ 3.2 mw/c ? lo power: +24 dbm max. ? mil-std-883 screening available description the unique design of the termination insensitive mixer (tim) enables it to apply high reverse voltag e to diodes during their off phase, in the lo cycle . this allows for higher power level performance with minimum distortion. in addition the tim has intern al loads that provide a good match and also absorb mixer generated lo frequency terms. combined, t h e s e f e a t u r e s g i v e t h e m i x e r i t s insensitivity to external mismatches, plus superior vswr. fp-2 (md-169) c-7 (mdc-169) sf-1 (mds-169)
termination insensitive mixer, 1 mhz - 3.5 ghz md-/mdc-/mds-169 m/a-com inc. and its affiliates reserve the right t o make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-c om assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v5 2 electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max frequency range rf, lo ports if port 0.001 - 3.5 5 - 1500 ghz mhz conversion loss 5 - 1000 mhz 2 5 - 3000 mhz 3 1 - 3500 mhz db db db 7 8 10 isolation lo to rf 5 - 1000 mhz 1 - 3500 mhz db db 30 20 lo to if 5 - 1000 mhz 1 - 3500 mhz db db 30 20 rf to if 10 - 500 mhz 1 - 3000 mhz 1 - 3500 mhz db db db 30 20 18 rf input 1 db compression 1 db desensitization dbm dbm +7 +5 ssb noise figure within 1 db of conversion loss max typical two-tone im ratio with a C10 dbm input, each tone 625 mhz and 35 mhz if 10 mhz 500 mhz 3000 mhz db db db 55 58 56 3rd order intermodulation ratio degradation @ if vswr 3:1 db 3 1. all specifications apply when operated at +10 db m available lo power with 50 ohm source and load im pedance. 2. for if frequencies of 5 - 300 mhz and rf of C10 dbm or less. 3. for mdc-169, add 1.0 db to conversion loss. parameter test conditions frequency units min typ max conversion loss lo @ +10 dbm if @ 60 mhz 5 - 1000 mhz 1000 - 3000 mhz 1 - 3500 mhz db db db 6.5 7.5 8.0 7.0 9.0 10.0 isolation lo to rf 5 - 1000 mhz 1 - 3500 mhz db db 30 20 35 25 lo to if 5 - 1000 mhz 1 - 3500 mhz db db 30 20 35 25 rf to if 10 - 500 mhz 1 - 3000 mhz 1 - 3500 mhz db db db 30 20 18 35 25 23 electrical specifications (mds-169): t a = -55c to +85c frequency: rf, lo ports = 1 - 3500 mhz, if port = 5 -1500 mhz
termination insensitive mixer, 1 mhz - 3.5 ghz md-/mdc-/mds-169 m/a-com inc. and its affiliates reserve the right t o make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-c om assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v5 3 pin configuration (md-169) pin no. function pin no. function 1 gnd 5 lo 2 gnd 6 gnd 3 gnd 7 gnd 4 if 8 rf bottom view of sf-1 pin configuration (mds-169) pin no. function pin no. function 1 gnd 3 lo 2 if 4 rf parameter absolute maximum max input power 5 total power 350 mw derated at 85 o c @ 3.2 mw/ o c lo power +24 dbm absolute maximum ratings (mds-169) 4 4. operation of this device above any one of these parameters may cause permanent damage. 5. ambient temperature (t a ) = +25 o c typical performance curves
termination insensitive mixer, 1 mhz - 3.5 ghz md-/mdc-/mds-169 m/a-com inc. and its affiliates reserve the right t o make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-c om assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v5 4 typical performance curves ordering information part number package md-169 pin fp-2 mdc-169 sma c-7 mds-169 sf-1
|