designed and manufactured in germany designed and manufactured in germany AXLE175 rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXLE175 rev.: 2 date: 2015-08-17 oscillator type: uhf temperature compensated crysta l smd oscillator parameter min. typ. max. unit condition frequency range 500 2500 mhz frequency stability initial tolerance @ +25c 1 ppm vs. operating temperature range 0.5 to 3 see tables 1 & 2 ppm option 1 & 2 vs. supply voltage variation (pushing) 0.2 ppm v s 5 % long term (aging) per year 1 2 ppm frequency adjustment range electronic frequency control (efc) 5 ppm efc voltage v c 0.5 2.5 4.5 v efc slope ( ? f / ? v c ) positive efc input impedance 100 k? rf output signal waveform sine wave load r l 50 5% output level (note 2) +10 dbm harmonics -30 dbc spurious -80 dbc pll products -60 dbc phase noise @ 1000 mhz (note 3) -110 -130 -150 dbc/hz dbc/hz dbc/hz @ 10 khz @ 100 khz @ 1 mhz lock detect output ld (note 4) 3.5 0 5 1.5 v v out of lock locked supply voltage v s 4.75 5.0 5.25 v current consumption (note 5) 150 200 ma enclosure (see drawing) (lxwxh) 25.4x25.4x8.0 max. mm weight 10 g packing palette notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. output level up to +24 dbm available on request 3. please consult factory for phase noise of other fre quencies 4. internal pll with tcxo reference 5. current consumption depends on output frequency absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd control voltage v c -0.5 7 v v c to gnd storage temperature -55 +125 c
designed and manufactured in germany designed and manufactured in germany AXLE175 rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg frequency stability vs. temperature stability lower temperature upper temperature option 1 [ppm] option 2 t [c] option 2 t [c] 05 0.5 0 0 a +50 10 1.0 1 -10 b +60 15 1.5 2 -20 c +70 20 2.0 3 -30 d +75 25 2.5 4 -40 e +80 30 3.0 f +85 table 1 table 2 ordering code model option 1 [stability] option 2 [temperature range] revision frequency [mhz] AXLE175 table 1 table 2 rev.2 1000.000 example: AXLE175-10-2c_rev.2 C 1000.000 mhz handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
designed and manufactured in germany designed and manufactured in germany AXLE175 rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing - bottom view - pin connections pin # symbol function 1 ld lock detect 2 v c control voltage (efc) 19 rf out rf output 22 d.n.c. do not connect 31,32 v s supply voltage all others gnd ground, case
designed and manufactured in germany designed and manufactured in germany AXLE175 rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 4(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 16.07.2015 first issue hh me 2 d0 17.08.2016 pll products added, additional note s and editorial changes hh hh
|
