luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis materials eclipse is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. set of (4) 1/2 diameter solid aluminum struts. the upper cast aluminum housing is designed with a tool-less hinged mechanism allowing a quick access for maintenance. the lower cast aluminum housing fits on a 4 (102) or 5 (127) pole and contains all electrical controls on a removable tray. electrical high intensity discharge (h.i.d) ballast electronic universal voltage 120v~277v (347v on request) and a power factor greater than 90%. end of life protection with a minimum starting temperature of -4f/-20c. socket medium base pulse rated 4kv porcelain body with a nickel plated screw shell and center contact rated 600v and 200c leads. finish five-stage preparation process including preheating of cast aluminum parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight : 33lbs (15kg) eclipse is designed for ease of access and installation. standard luminaire fits on a 4 (102) or 5 (127) pole. alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. ce certification on request. rated ip65. 1 1 2 3 4 6 5 7 30.375 (770) 30 (762) W767 epa: 0.7 july 2013 rev 0 W767 eclipse - hid 1- one piece .090 thick hard aluminum top shade. underside surface is painted white enamel to optimize light performance. 2- inner white enamel reflector. 3- set of 4 x 1/2 solid aluminum struts. 4- multi - faceted specular anodized aluminum up light reflector. 5- sealed reflector housing same color as luminaire. 6- cast aluminum upper hinged optical chamber housing. 7- cast aluminum lower electrical chamber housing. W767 eclipse features a unique tool-less swing out shade assembly, allowing a quick access to luminaire maintenance, leaving a clean optical chamber to ensure a high lumen performance. access to electrical components luminis.com type: quantity: project: catalog number: fixture wattage voltage finish option option option option
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis 2 1188 891 1034 594 W767 eclipse - hid july 2013 rev 0 descriptive information total lms: 4957 lumens total input watts: 128 w lamps: ed17/clear metal halide total efficiency: 55% bug rating: b2-u3-g1 cutoff classification: semi-cutoff distribution: type v outdoor report polar graph maximum candela = 1188 cp W767-m100 please visit our web site www.luminis.com for complete i.e.s. formatted download data. typical photometry summary standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color (refer to color chart) 120v 277v 347v model# lamp selection 1 voltag e 2 finish W767 luminaire selection metal halide t lamp type m39t m70t (t6/g12 base) m100t m150t mounting electrical aca pole mounted attachment with 45o support acw wall mounted attachment with 45o support ec3p pole mounted twin arm attachment ec3w wall mounted twin arm attachment tn3 3 tenon pole adaptor pr7 pedestal mount adaptor fs fuse 3 ph photocell 3 options notes 1- unless otherwise noted, lamps are by others. 2- luminaires are factory prewired for 120v (if no voltage is specified.) for other voltages, please specify with catalog number, or consult factory. 3- fuse and photo cell options are normally installed with poles when specified with luminis luminaires. (except for other types of mounting.) luminis.com
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) h9r 5l5 luminis aca 1 1 x 3 extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) ec3p 1 set of (2) 1 x 3 extruded aluminum side pole straight mounting. designed for luminaires with or less shades. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.97) 3 pr7 8 dia.(203) x 8 3/4 (222)h. extruded aluminum stand designed for short walls or pier mount. W767 eclipse - hid july 2013 rev 0 ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 pst10 ------- psb10 10 ft. (3 m) paa412 paa512 pst12 ------- psb12 12 ft. (3,6 m) paa414 paa514 pst14 ------- psb14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb16 16 ft. (4,8 m) paa418 paa518 ------- pta18 psb18 18 ft. (5,5 m) paa420 paa520 ------- pta20 psb20 20 ft. (6,0 m) ------- ------- ------- pta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matching pole selection psb pole series pst pole series paa pole series power feed 28 (711) 38.5 (978) 30 (762) 17.75 (451) 20 (508) power feed 12 (304) 34.5 (876) note 1 : pca pole with aca attachment requires a 30 (762) tenon extension over pole nominal height. ec3p and ec3ps require an 18 tenon extension. factory installed. (3).625 dia. (16) mounting holes @120o 6 dia. (152) bolt circle 2 dia. (51) power entry 8 dia. (203) base. pole mount 38.5 (978) luminis.com
luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis acw 1 x 3 (25x76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. ec3w set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. designed for luminaires with or less shades. 4 18 (457) 28 (711) power feed 38.5 (978) W767 eclipse - hid power feed july 2013 rev 0 wall mount mounting mounting 4 . 6 2 5 (118) 3 (76) 1 7 . 7 5 (451) power feed 3 (76) 4 . 6 2 5 (118) power feed 6 . 1 2 5 (156) 38.5 (978) luminis.com
|
