universal ac input protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on all using 105c long life electrolytic capacitors high effciency, long life and high reliability model number output volts output amps ripple & noise min load dc volt adjust load reg volt tolerance single output rs25-3.3 3.3 volts(dc) 6 amps 80mv pk-pk 0~6amps 2.85~3.6volt(dc) 2.0% 3.0% rs25-5 5 volts(dc) 5 amps 80mv pk-pk 0~5amps 4.75~5.5volt(dc) 1.0% 2.0% rs25-12 12 volts(dc) 2.1 amps 120mv pk-pk 0~2.1amps 10.8~13.2volt(dc 0.5% 1.0% rs25-15 15 volts(dc) 1.7 amps 120mv pk-pk 0~1.7amps 13.5~16.5volt(dc) 0.5% 1.0% rs25-24 24 volts(dc) 1.1 amps 120mv pk-pk 0~1.1amps 22~27.6volt(dc) 0.5% 1.0% rs25-48 48 volts(dc) 0.57 amps 200mv pk-pk 0~0.57amps 42~54volt(dc) 0.5% 1.0% 25w single output switching power supply rs25 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90~ 264 vac; 125~373 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 30amps/230vac input current 0.7 amps. @ 115vac 0.4 amps. @ 230vac leakage current <2mamps /240vac min load see selection chart output specifications voltage and current see selection chart line regulation (note 3) 0.5% load regulation (note 4) see selection chart voltage tolerance (note2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 80ms/230vac 14ms/115vac setup, rise time @ fl 1200ms, 23m/230vac 2200ms, 30ms/115vac over voltage protection 3.8 ~ 4.45volt(dc): 3.3volts(dc) 5.75 ~ 6.75volt(dc): 5volts(dc) 13.8 ~ 16.2volt(dc): 12volts(dc) 17.25 ~ 20.25volt(dc): 15volts(dc) 27.6~ 32.4volt(dc): 24volts(dc) 55.2~ 64.8volt(dc): 48volts(dc) shut off o/p voltage, clamping zener diode over current protection 110 ~ 180% rated output power hiccup mode, auto recover dc volt adjust see selection chart general specifications safety ul60950-1, tuv en60950-1 approved insulation resistance 100m?/500volts(dc),25c.70%rh emi compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 effciency 72% (rs25-3.3) 77% (rs25-5) 79% (rs25-12) 82% (rs25-15) 84% (rs25-24) 85%(rs25-48) isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204 light industry level, criteria a environmental specifications oper. temperature -20c to +70c (see derate curve) storage temperature -40c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.03% / c (0-50c) mtbf 309.7khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 5g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 78 x 51 x 28 inches 3.07 x 2.01 x 1.10 weight 7.05 oz (200g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. line regulation is measured from low line to high line at rated load. 4. load regulation is measured from 0% to 100% rated load. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 25w single output switching power supply rs25 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
25w single output switching power supply rs25 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
25w single output switching power supply rs25 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
