led indicator for power on protections: short circuit / overload / over voltage all using 105 c long life electrolytic capacitors cooling by free air convection high effciency, long life and high reliability model number output volts output amps ripple & noise line reg load reg effciency volt tolerance min load quad output RQ125-B 5 volts(dc) 11 amps 80mvpk-pk 0.5% 1.0% 79% 2.0% 2.0~12amps 12 volts(dc) 4.5 amps 120mvpk-pk 1.0% 3.0% 79% +8-3% 0.5~4.5amps -5 volts(dc) 1.0 amps 80mvpk-pk 1.0% 6.0% 79% +6,-10% 0.1~1.0amps -12volts(dc) 0.5 amps 80mvpk-pk 1.0% 2.0% 79% 5.0% 0~1.0amps rq125-c 5 volts(dc) 10 amps 80mvpk-pk 0.5% 1.0% 80% 2.0% 2.0~12amps 15 volts(dc) 4.0 amps 120mvpk-pk 1.0% 3.0% 80% +8,-3% 0.5~4.0amps -5 volts(dc) 1.0 amps 80mvpk-pk 1.0% 6.0% 80% +6,-10% 0.1~1.0amps -15 volts(dc) 0.5 amps 80mvpk-pk 1.0% 2.0% 80% 5.0% 0~1.0amps rq125-d 5 volts(dc) 8.0amps 80mvpk-pk 0.5% 1.0% 82% 2.0% 2.0~12amps 12 volts(dc) 2.5amps 120mvpk-pk 1.0% 3.0% 82% +8,-3% 0.5~4.0amps 24 volts(dc) 2.0amps 150mvpk-pk 1.0% 5.0% 82% +8.0% 0.1~2.5amps -12 volts(dc) 0.5 amps 80mvpk-pk 1.0% 2.0% 82% 5.0% 0~1.0amps 125w quad output switching power supply rq125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90-132vac /176~264vac selected by switch, 248-373 volts(dc) frequency range 47~63hz inrush current, typ: (cold start) 40 amps @ 230vac input current 3.0amps max @115vac 2.0amps max @230vac leakage current < 2.0mamps / 240vac output specifications voltage and current see selection chart line regulation (note 3) see selection chart load regulation (note 4) see selection chart voltage tolerance (note 2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 25ms/230vac, 30ms/115vac setup, rise time @ fl 500ms, 20ms/230vac 1200ms, 30ms/115vac over voltage protection 5volts(dc) only: 5.75~6.75volts(dc) hiccup mode, auto recover over current protection 110~150% rated output power hiccup mode, auto recover dc voltage adjust 5volts(dc)only: 4.75~5.5volts(dc) general specifications safety ul60950-1 tuv en60950-1 approved insulation resistance 100m?/500volts(dc)/25c/70%rh emi compliance to en55022b ((cispr22b) harmonic current compliance to en61000-3-2,-3 effciency see selection chart isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2,3,4,5,6,8,11; env50204, en61000-6-2(en50082-2) heavy industry level, criteria a environmental specifications oper. temperature -25c to +70c (see derate curve) storage temperature -40c to +85c, 10~95% rh relative humidity 20 to +90% rh non cond temperature coeffcient 0.03% / c (0-50c) on +5volts output mtbf 203.1k hrs min, mil-hdbk-217f (25c) vibration 10~500hz, 5g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 199 x 98 x 38 inches 7.84 x 3.86 x 1.50 weight 24.69 oz (700g) note 1. ripple and noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor. 2. tolerance: includes set up tolerance, line regulation and load regula - tion. 3.line regulation is measured from low line to high line at rated load. 4.load regulation is measured from 20% to 100% rated load, an other output at 60% rated load. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 125w quad output switching power supply rq125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
125w quad output switching power supply rq125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
125w quad output switching power supply rq125 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
