series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 1 of 9 north america only features: models single output model max output power (w) output voltage range (v) output current (a) input voltage (vac/hz) input voltage (vdc) mode of operation efficiency (%) 115 vac 230 vac 277 vac amepr30 c - 5070az 35 36-50 0.7 90- 305/47- 440 1 3 0 - 430 constant current 83 83 83 constant volta ge 83 83 83 amepr30 c - 4864az 30.7 36-48 0.64 90- 305/47- 440 1 3 0 - 430 constant current 83 83 83 constant voltage 83 83 83 amepr30 c - 36100az 36 24-36 1 90- 305/47- 440 1 3 0 - 430 constant current 83 83 83 constant voltage 83 83 83 amepr30 c - 24140az 33.6 12-24 1.4 90- 305/47- 440 1 3 0 - 430 constant current 82 82 82 constant voltage 82 82 82 amepr30 c - 12250az 30 5 -12 2.5 90- 305/47- 440 1 3 0 - 430 constant current 80 80 80 constant voltage 80 80 80 exceeding the maximum output power will per manently damage the converter . the dimming feature is not supported when units are used in constant voltage mode only, aimtec suggests to order - f no dimmin g option in the case. in constant current mode output curr ent is maximum shown, in constant voltage mode output voltage is the maximum shown . all models can be ordered with optional north american colour input wires ( black (l) , white (n) , green (gnd)) . add C na to part number when ordering. note: aimtec limit ed warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25c, humidity<75%, nominal input voltage (115/230/277vac) and at rated output load unless otherwise specified. see http://www.aimtec.com/terms - sale amepr30c - azs ac/dc led drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities wi th the levels listed in the safety table. applications for use wit hin rural agricultural, heavy industrial, and other areas or regions which are prone to dirty electrical conditions which would subject any of the above models to excessive voltages surges or spikes, ma y damage or cause early life failure of product. in this case consideration should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of aimtec device to ensure the longevity of the products. failure to identify excessive li ne surges violations prior to in stallation may damage sensitive equipment permanently. input specifications parameters conditions typical maximum units current (full load) 115 vac 430 ma 230 vac 250 ma 277 vac 210 ma inrush current <2ms (cold start) 115 vac 25 a 230 vac 40 a 277 vac 55 a leakage current i/o 0. 25 ma i/fg, o/fg 3 .5 ma power f actor 115 vac 0.96 230 vac 0.90 277 vac 0.85 external fuse recommended slow blow type 1 a start - up time 450 ms ? ac - dc constant current or constant voltage led driver ? over t emperature p rotection ? over current protection ? input range 90 - 305vac /47 - 440hz ? waterproof c ase rated ip6 8 ? high e fficiency up to 83 % ? power factor correction ? operating temperature - 40 to 8 5 c ? dimmable via resistive / 0 - 10vdc / pwm ? 5 years limited warranty ? short circuit protection click on series name for product info on aimtec.com
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 2 of 9 north america only output specifications parameters conditions typica l maximum units current accuracy 3 % line regulation ( ll - hl ) 2 % load regulation 0 - 100% load 3 % ripple & noise * 100 mv p - p hold - up time 50 ms current adjustment range 100 - 1 0 % * ripple and noise are measured at 20mhz bandwi dth by using a 0.1f (m/c) or (c/c) and 47f (e/c) parallel capacitor. isolation specifications parameters conditions typical rated units tested voltage i/o 3sec 3750 vac i/fg 2000 vac o/fg 500 vac isolation resistance 500vdc >1000 m genera l specifications parameters conditions typical maximum units switching frequency 130 khz over current protection R 105 % over voltage protection R 105 % short circuit protection auto recovery over temperature protection d etect case temperature 1 2 5c o c operating temperature with derating over c refer to model application o c maximum case temperature 100 o c storage temperature - 40 to +95 o c temperature coefficient 0.02 % / o c cooling free air convection humidity non condensing 20~ 9 5 % rh case material plastic potting epoxy (ip68 rated) wires ul1015 18awg * 20cm weight 540 g dimensions 137.33 x 60 x 40.50 mm ( 5.41 x 2.36 x 1.59 inches ) mtbf >400,000 hrs (mil - hdbk - 217f at t= +25c) safety specifications parameters agen cy approvals culus, ce standards ul8750, ul60950 - 1, en550 22 , class b , en60529(ip68), en61347 - 1, en61347 - 2 - 13 information technology equipment en55022 class b harmonic current emissions iec/en 61000 - 3 - 2 , class c voltage fluctuations and flicker iec/e n 61000 - 3 - 3, (en60555 - 3) electrostatic discharge immunity iec 61000 - 4 - 2 level 3 rf, electromagnetic field immunity iec 61000 - 4 - 3 level 2 electrical fast transient / burst immunity iec 61000 - 4 - 4 level 2 surge immunity iec 61000 - 4 - 5 level 3 rf, con ducted disturbance immunity iec 61000 - 4 - 6 level 2 power frequency magnetic field immunity iec 61000 - 4 - 8 level 1 voltage dips , short interruptions immunity iec 61000 - 4 - 11
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 3 of 9 north america only dimensions ?????? ?????? ?????? ?????? ????? ?????? ???? ?????? ????????????????? ????? ?????? ?????????? ?? ?????? ???? ????????? ? ???? ? ? ????? ????? ?????? ????? ?????? ????? ?????? ??????????? ????????? ????? x 1.00 ( x 0.04) ???? ?????? ???? ?????? ???????????????? analog (resistive) dimming application circuit am epr 30 - az n 1 st led + vout 1 1 - vout red black ac blue l brown green blue white pot model numbe r maximum pot v alue (k) amepr30 c - 5070az see graphs below amepr30c - 4864az see graphs below amepr30c - 36100az see graphs below amepr30c - 24140az see graphs below amepr30c - 12250az see graphs below
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 4 of 9 north america only dimming performance graphs amepr30c - 4864a z
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 5 of 9 north america only amepr30c - 5070az
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 6 of 9 north america only amepr30c - 12250az
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 7 of 9 north america only amepr30c - 24140az
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 8 of 9 north america only amepr30c - 36100az
series am epr30c - az up to 2.5a | ac- dc / dc - dc | led driver / converter www.a imtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 052.1e r3 .c 9 of 9 north america only derating - 40 - 20 0 20 40 60 80 100 100 80 60 40 20 0 free air convection 55 o c safe operating area ambient temperature o c 85 note: 1. datasheets are updated as needed and as such, spe cifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency certificati ons on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load u nless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessitate specific safety and regulatory sta ndards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
