60612 tkim/n2410pj tkim tc-00002514 no. a1862-1/8 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 TIG065E8 n-channel igbt 400v, 150a, v ce ( sat ); 4.2v, single ech8 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. ordering number : ena1862a features ? low-saturation voltage ? low voltage drive (2.5v) ? enhansment type ? built-in gate-to-emitter protection diode ? mounting height 0.9mm, mounting area 8.12mm 2 ? dv / dt guarantee * ? halogen free compliance speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-emitter voltage v ces 400 v gate-to-emitter voltage (dc) v ges 4 v gate-to-emitter voltage (pulse) v ges pw 1ms 5 v collector current (pulse) i cp v ge =2.5v, c m =100 f 150 a maximum collector-to-emitter dv / dt dv / dt v ce 320v, starting tch=25 c 400 v / s channel temperature tch 150 c storage temperature tstg -40 to +150 c * : concerning dv / dt (slope of collector voltage at the time of turn-off), will be 100% screen-detected in the circuit shown a s fig. 1. package dimensions unit : mm (typ) 7011a-004 product & package information ? package : ech8 ? jeita, jedec : - ? minimum packing quantity : 3000 pcs./reel packing type: tl marking electrical connection 1 : emitter 2 : emitter 3 : emitter 4 : gate 5 : collector 6 : collector 7 : collector 8 : collector ech8 1 4 85 0.15 0 to 0.02 0.25 0.25 2.8 2.3 0.65 2.9 0.3 0.9 0.07 top view bottom view ze lot no. 87 6 5 12 3 4 tl TIG065E8-tl-h
TIG065E8 no. a1862-2/8 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector-to-emitter breakdown voltage v (br)ces i c =2ma, v ge =0v 400 v collector-to-emitter cutoff current i ces v ce =320v, v ge =0v 10 a gate-to-emitter leakage current i ges v ge =4v, v ce =0v 10 a gate-to-emitter threshold voltage v ge (off) v ce =10v, i c =1ma 0.4 0.9 v collector-to-emitter saturation voltage v ce (sat) i c =100a, v ge =2.5v 4.2 7 v input capacitance cies v ce =10v, f=1mhz 3100 pf output capacitance coes 30 pf reverse transfer capacitance cres 23 pf fig.1 large current r load switching circuit note1. the collector voltage gradient dv / dt must be smaller than 400v / s to protect the device of gate-series resistance r g when it is turned off. ordering information device package shipping memo TIG065E8-tl-h ech8 3,000pcs./reel pb free and halogen free 100k c m r l r g v cc + TIG065E8 v ge i c -- v ce collector-to-emitter voltage, v ce -- v collector current, i c -- a i c -- v ge gate-to-emitter voltage, v ge -- v collector current, i c -- a it16024 0 0 25 75 50 150 100 125 it16025 0 0 12 5 9 8 7 6 34 10 25 125 75 50 150 100 0.5 1.0 4.0 2.0 2.5 3.0 3.5 1.5 v ge =4.0v 3.0v 2.5v v ce =10v 1.8v 25 c 75 c tc= --25 c tc=25 c
TIG065E8 no. a1862-3/8 case temperature, tc -- c gate-to-emitter cutoff voltage, v ge (off) -- v v ge (off) -- tc collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v case temperature, tc -- c v ce (sat) -- tc collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v collector-to-emitter voltage, v ce -- v v ce -- v ge gate-to-emitter voltage, v ge -- v collector-to-emitter voltage, v ce -- v cies, coes, cres -- v ce sw time -- r g switching time, sw time -- ns sw time -- i cp switching time, sw time -- ns collector current (pulse), i cp -- a gate series resistance, r g -- it16029 05075 100 125 150 25 --25 --50 5 9 8 7 6 10 4 3 0 1 2 v ge =3v, i c =150a 4 3 0 1 2 it16026 0 1.0 0.5 10 5 9 7 6 8 2.0 1.5 2.5 3.0 4.5 3.5 4.0 5.0 130a 100a tc= --25 c i c =150a it16030 0 50 75 100 125 150 25 --25 --50 1.0 0.6 0.5 0.9 0.8 0.7 0.4 0.3 0.2 0.1 0 0161820 68 41214 10 2 100 10 7 5 10000 1000 7 5 3 2 3 2 7 5 3 2 it16031 cies coes cres f=1mhz 4 3 0 1 2 it16028 0 1.0 0.5 10 5 9 7 6 8 2.0 1.5 2.5 3.0 4.5 3.5 4.0 5.0 130a 100a tc=75 c i c =150a 4 3 0 1 2 it16027 0 1.0 0.5 10 5 9 7 6 8 2.0 1.5 2.5 3.0 4.5 3.5 4.0 5.0 130a 100a tc=25 c i c =150a 2 3 57 57 3 2 100 1000 10 it16032 3 2 7 5 7 5 3 2 1000 10000 100 3 2 7 5 7 5 3 2 1000 10000 100 t r t d (off) t d (on) t f 02040 80 60 100 140 160 120 200 180 it16033 t r t d (off) t d (on) t f v ge =2.5v, i c =100a v ce =10v i c =1ma switching test circuit fig.1 v ge =2.5v v cc =320v i cp =150a c m =100 f pw=50 s switching test circuit fig.1 v ge =2.5v v cc =320v r g =140 c m =100 f pw=50 s cies, coes, cres -- pf
TIG065E8 no. a1862-4/8 collector current (pulse), i cp -- a main capacitor, c m -- f c m -- i cp collector current (pulse), i cp -- a main capacitor, c m -- f c m -- i cp gate-to-emitter voltage, v ge -- v collector current (pulse), i cp -- a i cp -- v ge dv / dt -- r g gate series resistance, r g -- turn off dv / dt -- v / s dv / dt -- turn off i c turn off collector current, turn off i c -- a turn off dv / dt, dv / dt -- v / s it16036 20 40 60 80 100 120 140 0 160 50 0 100 150 200 250 300 v ce =320v v ge =2.5v tc=25 c tc=70 c it16037 20 40 60 80 100 120 140 016 0 50 0 100 150 200 300 350 250 400 450 500 v ce =320v v ge =3v tc=25 c tc=70 c it16038 20 40 60 80 100 120 140 0 160 0 100 200 300 400 500 tc=25 c v ce 320v it16103 200 250 300 350 100 150 50 0 0 100 200 300 500 400 600 it16104 1.5 2.0 3.5 4.5 3.0 4.0 5.5 5.0 2.5 1.0 0.5 0 0 20 40 60 80 100 120 140 180 160 v ce =320v c m =100 f tc=25 c tc=70 c switching test circuit fig.1 v ge =2.5v v cc =320v i cp =150a
TIG065E8 no. a1862-5/8 de nition of dv/dt dv/dt is de ned as the maximum slope of the below v ce curve during turn-off period. dv/dt= v ce / t= v ce /100ns overall waveform enlarged picture of turn-off period de nition of switching time v ge v ce i c v ge :10% v ce :90% v ge :90% v ce :10% v ce :10% t d (on) t d (off) t r t f i c :90% i c :10% it15324 t t t v,i v ce i c i cp turn off i c t turn-off period t=100ns i c v ce v ce it15323 turn off v ce
TIG065E8 no. a1862-6/8 embossed taping speci cation TIG065E8-tl-h
TIG065E8 no. a1862-7/8 outline drawing land pattern example TIG065E8-tl-h mass (g) unit 0.02 * for reference mm unit: mm 0.4 0.6 2.8 0.65
TIG065E8 ps no. a1862-8/8 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
