unisonic technologies co., ltd abs2u thru abs10u schottky bridge www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r202-054.a 1.0a schottky bridge rectifier ? description the utc abs2u thru abs10u is a schottky bridge rectifiers, it uses utc?s advanced technology to provide customers with low forward voltage drop and high current capability, etc. the utc abs2u thru abs10u is suitable for surface mount application. ? features * low forward voltage drop * high current capability * high surge current capability * designed for surface mount application ? symbol abs - + ? ordering information ordering number package packing abs2ul-abs-r abs tape reel abs4ul-abs-r abs tape reel abs6ul-abs-r abs tape reel ABS8UL-ABS-R abs tape reel abs10ul-abs-r abs tape reel ? marking
abs2u thru abs10u schottky bridge unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r202-054.a ? absolute maximum ratings (t a =25c, unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. ratings parameter symbol abs2u abs4u abs6u abs8u abs10u unit repetitive peak reverse voltage v rrm 200 400 600 800 1000 v working peak reverse voltage v rwm 200 400 600 800 1000 dc blocking voltage v dc 200 400 600 800 1000 v rms voltage v rms 140 280 420 560 700 v average rectified output current t a =30c i o 1.0 a non-repetitive peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 35 a operating junction temperature range t j -55~+150 c storage temperature range t stg -55~+150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. mounted on glass epoxy pc board with 1.3mm 2 solder pad. 3. mounted on aluminum subs trate pc board with 1.3mm 2 solder pad. ? thermal data parameter symbol ratings unit junction to ambient ja 62.5 /w note: measured at 1.0 mhz and appli ed reverse voltage of 4.0v d.c. ? electrical characteristics (t a =25c unless otherwise noted) parameter symbol test conditions min typ max unit instantaneous forward voltage v f i f =1.0a 1.1 v t j =25c 5.0 a dc reverse current at rated dc blocking voltage i r t j =125c 500 a
abs2u thru abs10u schottky bridge unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r202-054.a ? typical characteristics utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
