shielded contacts b-18 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/77 852-009 size 16 coaxial socket size #16 coaxial socket contacts for mil-dtl-38999 series i, iii and iv connectors d38999 ser. i, iii, iv inner pin contact shield crimp sleeve shield crimp sleeve r .003 max outer contact barrel inner pin contact bin color bands (see table) u n p r t 47/43 32 spherical radius s ?m ?j ?f ?e x * .585 min r .002 min outer contact mates with .0635/.0615 pin (spring design optional) .063 min .033 .029 .626 .620 47 43 .896 max ?z ?d ?c ?b ?a max .166 min depth ?g after crimp k ?h ?l ?v ?w .020 .013 thru one wall only radial location optional r material and finish contact body: copper alloy/gold plated hood: stainless steel/passivated center contact: copper alloy/gold plated crimp sleeve: copper alloy/gold plated insulator: tefon * indicates point at which a square ended pin of the same basic diameter as the mating contact frst engages the outer contact spring these #16 socket contacts accept 50 ohm and 75 ohm coaxial cable. inner contact is rated at 1 amp, the outer contact 12 amps. dwv rating is 800 vac rms sea level, 250 vac at 50,000 feet. contacts are packaged individually and are unassembled with instruction sheet. one contact consists of outer contact , fuorocarbon dielectric, inner contact and shield crimp sleeve. inner and outer contacts are gold-plated copper alloy. approved to sae as39029. vswr rating 1.5:1 maximum up to 700 mhz. 5000 megohm insulation resistance. mates with: m39029/76.
shielded contacts b-19 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2011 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com e-mail: sales@glenair.com b m39029/77 852-009 size 16 coaxial socket type cable accommodation part number military part number color band 1st 2nd 3rd socket m17/119-rg174, m17/113-rg316, m17/094-rg179, times aa3248, teledyne 11299, haveg 8100207, thermax 75-738-bccwxe, tensolite 30888/l707yx-1 852-009-16-428 m39029/77-428 yellow red gray m17/093-rg178 852-009-16-429 m39029/77-429 yellow red white haveg 61-02051, revere wh95623 852-009-16-430 m39029/77-430 yellow orange black haveg 30-00761, haveg 30-02024, haveg 30-02033, tensolite 24713/a955kk1, tensolite 26723/a955kk1 852-009-16-431 m39029/77-431 yellow orange brown table i bin code ?a max ?b ?c ?d min ?e ?f ?g max ?h min ?j max k ?l min 428 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) .670 (17.0) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .105 (2.7) .120 (3.0) .105 (2.7) .095 (2.4) .0210 (0.5) 429 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) 0.575 (14.6) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .094 (2.4) .120 (3.0) .105 (2.7) .095 (2.4) .0210 (0.5) 430 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) .670 (17.0) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .105 (2.7) .120 (3.0) .105 (2.7) .095 (2.4) .0355 (0.9) 431 .113 (2.9) .068 (1.73) .065 (1.65) .089 (2.3) .084 (2.1) 0.575 (14.6) .103 (2.62) .101 (2.57) .130 (3.3) .127 (3.2) .108 (2.7) .094 (2.4) .120 (3.0) .105 (2.7) .095 (2.4) .0270 (0.7) table i (continued) bin code ?m max n min p r s t u ref ?v ?w x ?z max 428 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .611 (15.5) .601 (15.3) .085 (2.2) 429 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .611 (15.5) .601 (15.3) .076 (1.9) 430 0.052 (1.3) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .611 (15.5) .601 (15.3) .085 (2.2) 431 .046 (1.2) .103 (2.6) .094 (2.4) .087 (2.2) .125 (3.2) .119 (3.0) .079 (2.0) .073 (1.9) .269 (6.83) .266 (6.76) .3895 (9.9) .0155 (.39) .0145 (.37) .030 (0.8) .028 (0.7) .611 (15.5) .601 (15.3) .076 (1.9) table iii inner contact outer contact insertion tool extraction tool basic crimping tool positioner basic crimping tool positioner m22520/2-01 m22520/2-35 m22520/4-01 m22520/4-02 m81969/8-07 or m81969/14-03 m81969/8-08 or m81969/14-03
|
