sanken electric co., ltd. EG1 050607 1 61426 - 01 scope the present specifications shall apply to an EG1 . outline type silicon diode structure resin molded applications high frequency rectification flammability ul94v - 0(equivalent) absolute maximum ratings no. item symbol unit rating condi tions 1 transient peak reverse voltage v rsm v 400 2 peak reverse voltage v rm v 400 3 average forward current i f(av) a 0.8 refer to derating curve in section 7 4 peak surge forward current i fsm a 15 10ms. half sine wave, one shot 5 i 2 t limiting value i 2 t a 2 s 1.125 1ms Q Q j c - 40 to +150 7 storage temperature t stg c - 40 to +150 electrical characteristics (ta=25c, unless otherwise specified) no. item symbol unit rating conditions 1 forward voltage drop v f v 1.8 max. i f =0.8a 2 revers e leakage current i r ua 50 max. v r =v rm 3 reverse leakage current under high temperature h ? r 1 ua 300 max. v r =v rm , t j =100 c h ? r 2 ma 3.0 max. v r =v rm , t j =150 c 4 reverse recovery time trr - 1 ns 100 max. i f =i rp =100ma 90% recovery point, t j =25 c trr - 2 ns 50 max. i f =100ma, i rp =200ma 75% recovery point, t j =25 c 5 thermal resistance r th(j - l) c /w 17 max. between junction and lead
sanken electric co., ltd. EG1 050607 2 61426 - 01 characteristics i f(av) f forward power dissipation , p f (w) average forward current , i f(av) (a) v r r reverse power dissipation , p r (w) reverse voltage ,v r (v) tj= 150 c t/t=1/6 t/t=1/3,sinewave t/t=1/2 dc tj= 150 c 1 - t/t=5/6 sinewave 1 - t/t=2/3 1 - t/t=1/2 0.0 0.5 1.0 1.5 2.0 0.0 0.2 0.4 0.6 0.8 0.00 0.20 0.40 0.60 0.80 1.00 0 100 200 300 400 t t
sanken electric co., ltd. EG1 050607 3 61426 - 01 derating tl f(av) v r =4 00v average forward current, i f(av) (a) lead temperature , tl ( c ) t/t=1/6 t/t=1/2 dc t/t=1/3 sinewave tj= 150 c 0.0 0.2 0.4 0.6 0.8 100 110 120 130 140 150 t t
sanken electric co., ltd. EG1 050607 4 61426 - 01 package information - package type, physical dimensi ons and material * 1 the allowance position of body against the center of whole lead wire is 0.5mm(max.) * 2 the centric allowance of lead wire against center of physical body is 0.2mm(max.) * 3 the burr may exit up to 2mm from the body of lead dimension s in mm - appearance the body shall be clean and shall not bear any stain, rust or flaw. - marking type number EG1 is abbreviated as g1 lot number 1 first digit: last digit of year second digit: month from 1 to 9 for jan. to sep. o for oct., n for nov., and d for dec. lot number 2 (ten days) ? ?? ??? cathode mark 5.0 0.2 2.7 0.2 0.78 0.05 62.3 0.7 1 2 3
|
