ant-2.4-pw-qw data sheet product dimensions description features electrical specifications ordering information electrical specifications and plots measured on 4.00 x 4.00 reference ground plane 4.13 (105.0) 0.53 (13.5) 0.20 (5.0) 0.31 (7.8) end view 0.57 (14.5) 1/4-28 unf designed for permanent attachment, pw series 1/2- wave whips give outstanding performance in a rugged and cost-effective package. the antenna is attached by placing its base through a 1/4 hole in the product and securing it with a nut or by threading it into a pem-style insert. this method of attachment is highly secure and saves the cost of an antenna connector. the antenna is fed through the base with rg-174 coax cable, which may be soldered directly to the board or attached using a 50- ohm connector. standard cable length is 8.5. custom lengths and terminations are available by special order. rev 4-13-09 typical vswr antenna factor 159 ort lane merlin, or 97532 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) vswr graph ? low cost ? outstanding performance ? omni-directional pattern ? wide bandwidth ? flexible main shaft ? rugged & weatherized ? integral 8?-inch rg-174 coax cable ? use with plastic or metal enclosures ? center freq. 2.45ghz ? bandwidth 250mhz ? wavelength 1/2-wave ? vswr <1.9 typ. at center ? impedance 50 ohms ? connection case-mount ? cable 8?-inch rg-174 coax ? ant-2.4-pw-qw center 2450.000mhz span 200.000mhz s11 swr 1.373 7/16 hex
|