model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/7 architectural lighting interior automotive emitting color:warm white smt package http://www.foryard.com approved by applications: decorative lighting rohs compliant fylp-5w-wws-a a features: illuminations product specification model no. fylp-5w-wws-a customer approved signatures high-power led type size (mm):5.6*8.5 concave checked by prepared by
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter, tolerance is 0.2mm. 3.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/7 http://www.foryard.com model no. fylp-5w-wws-a fylp-5w-wws-a a
model. no. rev. min. typ. 2.8 --- --- (0.45,0.41) 3000 --- 170 --- 120 page 3/7 http://www.foryard.com 5000 forward current(dc) pd ma 1200 v v u a typical electrical &optical charcteristics(ta=25oc ) tstg unit a absolute maximun ratings(ta=25 o oo o c) absolute maximum rating model no. fylp-5w-wws-a fylp-5w-wws-a --- 4000 unit vr tsol ifp storage temperature peak forward current* *pulse width Q QQ Q 1msec duty Q QQ Q 1/10 mw power dissipation operation temperature topr symbol if 1300 items 3.6 5 max reflow soldering:260 /3sec 5 ma condition if = 1200ma items forward voltage reverse current chromatic coordinates -40 o c+85 o c -40oc+100oc symbol vf reverse voltage soldering temperature ir (x,y) cct color temperature vr = 5v if = 1200ma if = 1200ma v deg --- k lm 50% power angle 2? if = 1200ma --- if = 1200ma luminous flux item reflector wire encapsulate --- material chip material ppa gold silicone ingan note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards.
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) radiation pattern. page 4/7 http://www.foryard.com fylp-5w-wws-a a model no. fylp-5w-wws-a i n g a n / a l 2 o 3 r e l a t i v e l u m i o n o u s i n t e n s i t y l o p @ m a x = 1 )
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/7 a model no. fylp-5w-wws-a http://www.foryard.com fylp-5w-wws-a foryard o p t o e l e c t r o n i c s www.foryard.com foryard o p t o e l e c t r o n i c s led led led led pn:fyls-xxxxxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohsrohs rohs attention attention attention attention qc: qc pass part no: fylp-xxxxxx xxxx/xx/xx foryard qc: qc pass xxxxxxxxxx rohs rohsrohs rohs 10 reels /box 6 boxes/carton outside label outside label
model. no. rev. precautions for use: page 6/7 before opening the packaging , check for air leaks in the bag. http://www.foryard.com fylp-5w-wws-a a model no. fylp-5w-wws-a 1. storage to prevent moisture absorption into high-power leds during the transportation and storage , the leds a re packed in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as secondary protection after the bag is opened, the high-power leds must b e stored at <30 and < 60% rh. under these conditions, high-power leds must be used within 24 hours. if t he leds are not within 24 hours after removal from the bag , baking is required take the material out of the pac kaging bag before baking. do not open the oven door frequently during the baking process. the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is required if the shelf life has expired the epoxy resin of an high-power led should not con tact the tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an high-power led during soldering. handling of an high-power led should be done only w hen the package has been cooled down to below 40 (2)reflow soldering 2. soldering (1) manual soldering with a soldering iron use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 and soldering time no more than 2 seconds. temperature profile peak temperature temperature pre-heat soak reflow cooling time melting-point
rev. rev. page 7/7 a no stress should be exerted on the package during soldering. 3. static electricity when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded solder=sn63-pb37 solder= pb-free average ramp-up rate:4 /sec.max average ramp-up rate:4 /sec.max model no. fylp-5w-wws-a fylp-5w-wws-a ramp-down rate:6 /sec.max ramp-down rate:6 /sec.max peak temperature:230 peak temperature:250 peak preheat temperature:100-150 peak preheat temperature:100-150 preheat time:100seconds.max preheat time:100seconds. max the appearance and specifications of the product ma y be modified for improvement without notice. is changed slightly an operating current and therm al. time within 5 of actual peak temperature=10 sec. max time within 5 of actual peak temperature=10 sec. max duration above 183 is 80 sec. max duration above 217 is 80 sec. max high-power led should not be modified afte r soldering. if modification cannot be avoided, the modification this device should not be used in any type of fluid such as water, oil, organic solvent and etc 4. others must be pre-qualified to avoid damage to t he high-power leds. reflow soldering should not be done more t han one time http://www.foryard.com static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. high-brightness led light may injure human eyes. av oid looking directly into lighted led
|
