.xxx .307 (7.798mm) .370 (9.400mm) lock washer retaining nut .344 (8.740mm) (3.81mm) .150 (10.970mm) .432 (10.930mm) 0.08) (.410mm) .016 .003 .430 (.860mm .034 .200 (5.080mm) litepipe assembly xxx = length 052 032 .320" .520" xxx request available upon custom lengths xxx lcs ordering code: 072 .720" 092 .920" 112 1.12" 132 1.32" lens xxx = color rtp red transparent atp amber transparent gtp green transparent btp blue transparent ytp yellow transparent ctp clear transparent revisions d c b a a b c d 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 visual communications company, inc is checked see notes see notes 8/19/10 dpz prohibited. drawn dwg. no. revised per ecr 111009az01 001 phone (760) 560-1300 fax (760) 560-1 301 email: vccsales@vcclite.com title: b kh without the written permission of rev scale: 5:1 sheet 1 of 1 do not scale drawing size material proprietary and confidential third angle projection date description ecn # date finish rev initials 190 bosstick boulevard, suite 101 san marcos, ca 92069 usa visual communications company, inc. litepipe moisture sealed 3. 5mm threaded lens - polycarbonate ul 94-v2 reproduction in part or as a whole 0.051) panel hole on .500 (12.7mm) centers. visual communications company, inc. any seal - epdm drawing is the sole property of the information contained in this k.howard 8/18/10 lcs xxx xxx 001 panel thickness .031 (.8mm) to .125 (3.18mm). panel hole shall be deburred, but not chamfered. assembly: insert litepipe through the panel hole, slide lock washer onto lens barrel on litepipe 2. 7.92mm and twist on retaining ring. slide pcb into positi on aligning led with the end of the litepipe unit. material: litepipe - acrylic ( clear optical grade) ul 94-hb 5. u.s. & foreign pat. issued & pend. approval 4. meets nema 6p/ip 67 standards edges .030 max break all corners and sharp retaining nut - thermoplastic (white) ul 94-v0 lock washer - fh steel, nickel plate 1. notes: mounting: mounts in a .312 .002 ( unless otherwise specified dimensions are in inches: angles decimals 1' . x .020 .xx .010 finish .xxx .005 8/18/10
|