6 w non dimmable light bulb 1 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. series bub o e2716 0 xx 05 version 1.1 date 201 1 / 12 / 20 specification non dimmable light bulb (white body)
6 w non dimmable light bulb 2 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. features: specification: part number bubo e27160wf05 bubo e27160nf05 bubo e27160cg05 input voltage 100 240v input current 510 - 560ma power co nsumption 6w power factor 50% cct 2760 ~ 2960k 3920 ~ 4600k 5450 ~ 6650k illuminance 400 lm 430 lm 450 lm efficiency 66 lm/w 71 lm/w 75 lm/w cri 80 75 75 viewing angle 270 led type smd285 led quantity 18 pcs case temperature (ts) 59 life - span 2 0,000hr operating temperature - 20 55 operating humidity 90% storage temperature - 40 60 material glass/al alloy white dimension 117.82*d60mm weight 93g led non dimmable light bulb ( white body 6 w 2700k ) buboe27160cg05 BUBOE27160NF05 buboe27160wf05 e26/27 base input voltage : 100 240v cct: 27 00k 4 2 00k 6000k long life span and low maintenance cost. no ultraviolet light or infrared light spectrums rohs compliant and mercury - free
6 w non dimmable light bulb 3 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. dimension: ligth distribution curve:
6 w non dimmable light bulb 4 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. luminous intensity distribution cur ve (2700k): illuminance distribution ( 27 00k) :
6 w non dimmable light bulb 5 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. packing: light bulb is packaged inviduallyin carton box. the spec label is placed on the top of the box (50*50mm). the label is aligned with the edge of the box. one inner box contains 10 pcs cartons. an outer box contains 10 pcs of inner boxes (5 pcs on bottom and 5 pcs on top separated by a partition in the middle) . the lables are placed on the outer boxes (100x70mm). every outer box corner has to be r einforced. dimension 65x65x120mm net weight 93g gross weight 118.5g ou ter box dimension 710x355x295mm quantity 100 pcs net weight 9.3 kg gross weight 16.27 kg outer box label inner box dimension 342x138x128mm quantity 10 pcs net weight 0.93 kg gross weight 1.30 kg
6 w non dimmable light bulb 6 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. packaging ribbon wraps around the longer side protective corner dimension 50x50x715mm 4pcs 50x50x375mm 4pcs 50x50x310mm 4pcs 50x50x54mm 8pcs
6 w non dimmable light bulb 7 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. 1. please ensure the input voltage at the operating voltage range before connect ing led bulb . otherwise, the leb bulb may be damaged by the inappropriate input. 2. when power is up, please do not t ouch the metal base or you may be in danger of electric shock. 3 . before unpack ing , please check for any damage on the bulb . if damages are found , please contact your supplier for replacement. 4 . please follow the manual closely and careful ly for safety and quality issue. 5 . before the installation, please ensure that the install ation location can support 10x or more th e weight of the bulb. t he bulb should be installed at an un - shaking and un - inflammable place. 6 . during operation , the bulb s operating temperature may up to 55 , so please keep the bulb away from the flammable place. 7 . if the bulb is operated in an environment that is higher than 55 , its lifespan will decrease. please keep the operating temperature around 25 so the lifespan stay s at the specific range. 8 . please do not frequently power on and off in a short period of time , otherwise it may damage the b u l b. note: all contents are subjected to change without notice caution
6 w non dimmable light bulb 8 / 8 tel: 1 - 408 - 514 - 1524 fax: 1 - 408 - 514 - 1523 http://www.qt - brightek.com copyright ? 2010 qt - brightek corporation. all rights reserved. the information in this document is subject to change without notice. revision history: description: revision # revision date new release of 6w non dimmable white body light bulb v1.0 12/06/2011 update format v1.1 12/20/2011 disclaimer qt - brightek reserves the right to make changes without further notice to any products herein to improve reliability, function or design . qt - brightek does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. life support policy qt - brighteks products are not authorized for use as critical components in life support devices or systems without the express written approval of qt - brightek. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical impla nt into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
|
