oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 824-if70.0m-wa 70 mhz if saw filter 0.33mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 824-if70.0m-wa january 2011 rev a 70 mhz if saw filter 0.33mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, e, g, h, i, j ground a input f output test fixture & values input l1=200nh q > 40, c1=100pf output l2=180nh q > 40, c2=51pf source/load impedance 50 ?
oscilent part number 824-if70.0m-wa january 2011 rev a 70 mhz if saw filter 0.33mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 8.5 12.0 amplitude ripple variation at fo 50.0 khz db p-p - 0.4 1.0 absolute delay at fo sec - 3.22 - in/out return loss at fo db - - - temperature coefficient ppm/c - -0.03 - bandwidth at ?3.0 db mhz 0.25 0.33 - bandwidth at ?50.0 db mhz - 0.98 1.1 relative attenuation: 10.0 ~ 69.2 mhz db 50 57 - 70.8 ~ 110.0 mhz db 50 57 -
oscilent part number 824-if70.0m-wa january 2011 rev a 70 mhz if saw filter 0.33mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|