genuine aircraft hardware co. all original text, tables, and drawings are copyright 1994-2010 reproduction by permission only. 174 documents in this book for reference only, not intended for design. not guaranteed for accuracy . nas1832 thru nas1836, inserts for composite or honeycomb panel fastening these nas1832 thru nas1836 , potted in inserts are the standard for fastening in composite or honeycomb panels. the panel is first prepared by drilling or routing a hole or holes in the panel as necessary, depending on whether or not the insert is a through hole insert or a closed end insert. after preparing the hole and securing the insert in place with the nas1837 adhesive tab (comes with inserts), then the adhesive or epoxy as recommended by the panel or aircraft manufacturer is forced in through one of the potting holes until it is forced out of the other hole or slot which acts as a vent hole. after the proper curing time and procedures are followed, remove the tab, clean up as required and then fasten items to the newly installed insert as appropriate. please use part number diagram, tables and pictures, to select inserts when selecting length on all except nas1833 and nas1834, allow .040in between insert and back skin continued..........
175 documents in this book for reference only, not intended for design. not guaranteed for accuracy. genuine aircraft hardware co. all original text, tables, and drawings are copyright 1994-2010 reproduction by permission only. nas1832 thru nas1836, inserts for composite or honeycomb panel fastening....continued continued.......... note: do not specify less than minimum lengths shown on tables ! installation t abs are supplied with each insert if you need extras see the part numbers below for each series and size of insert nas1832, 1833, and 1834 all use the tab with part # nas1837t3 for thread sizes 06,08 & 3. nas1832, 1833, and 1834 all use the tab with part # nas1837t6 for thread sizes 4 and 5. NAS1835, all use nas1837t7 they only come in thread sizes 3 and 4. nas1836 sizes 06, 08 & 3, use nas1837t2 , for size 4 use nas1837t4
genuine aircraft hardware co. all original text, tables, and drawings are copyright 1994-2010 reproduction by permission only. 176 documents in this book for reference only, not intended for design. not guaranteed for accuracy . nas1832 thru nas1836, inserts for composite or honeycomb panel fastening....continued length
|
