ba vcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-02 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 1 / 2 typical applications features telecommunication standard 4-pin dip package wireless application frequency range 1 mhz ? 125 mhz frequency stabilities parameter code i frequency stability operating temp range 54 100 ppm 55 50 ppm 56 25 ppm 0....70 c frequency tuning parameter code ii value condition 60 > 50ppm electrical frequency control 61 >100 ppm voltage range 0.5v to 4.5v pulling slope positive rf output parameter value condition signal hcmos note 1 load 15pf duty cycle 40/60% @ vs/2 supply voltage parameter code iii value condition supply voltage (vs) 05 5v 5% < 30 ma < 20 mhz < 40 ma < 40 mhz power consumption steady state < 90 ma < 125 mhz supply voltage (vs) 33 3.3v 5% < 30 ma < 20 mhz < 40 ma < 40 mhz power consumption steady state < 50 ma < 125 mhz additional parameters parameter value condition frame specification tqa 9000
ba vcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-02 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 2 / 2 enclosure drawing all units in mm 1,0max. 0,2 0,2 15,24 20,8max. ?0,45 6,35 5,1max. 7,62 13,2max. 0,5 14 8 7 1 pin connections pin pin pin pin 1 7 8 14 control voltage (v c ) gnd rf output supply voltage (v s ) ordering code code i code ii code iii model frequency stability frequency tuning supply voltage frequency example: ba 54. 60. 05. 10m00000 order: ba notes 1 can drive ttl, acmos and cmos unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) subject to technical modification; not all options are available at all frequencies
|
