oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl125.0m-09a 125.0 mhz if saw filter 9.40 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl125.0m-09a january 2011 rev a 125.0 mhz if saw filter 9.40 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=56nh, l2=10nh output l3=10nh, l4=47nh source/load impedance 50 ?
oscilent part number 813-sl125.0m-09a january 2011 rev a 125.0 mhz if saw filter 9.40 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 124.85 125.0 125.15 insertion loss at fo db - 17.3 19.0 amplitude ripple within fo 3.8 mhz db p-p - 0.45 0.9 group delay variation within fo 3.8 mhz nsec - 25 60 absolute delay at fo sec - 0.85 - temperature coefficient ppm/c - -18 - bandwidth at ?1.0 db mhz 9.00 9.40 - bandwidth at ?3.0 db mhz - 10.10 - bandwidth at ?40.0 db mhz - 13.30 15.00 relative attenuation: lower sidelobe db - 48 - upper sidelobe db - 48 -
oscilent part number 813-sl125.0m-09a january 2011 rev a 125.0 mhz if saw filter 9.40 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide-band
oscilent part number 813-sl125.0m-09a january 2011 rev a 125.0 mhz if saw filter 9.40 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo3.8mhz group delay variation fo3.8mhz smith chart
oscilent part number 813-sl125.0m-09a january 2011 rev a 125.0 mhz if saw filter 9.40 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|