? semiconductor components industries, llc, 2011 april, 2011 ? rev. 3 1 publication order number: CM6317/d CM6317 emi filter with esd protection for data line applications product description the CM6317 is an 18 ? bump emi filter with esd protection device for data line application in a 0.4 mm pitch, 5 x 4 csp form factor. it is fully compliant with iec 61000 ? 4 ? 2. the CM6317 is rohs ii compliant. features ? 18 ? bump, 1.96 mm x 1.56 mm footprint chip scale package ? these devices are pb ? free and are rohs compliant marking diagram device package shipping ? ordering information http://onsemi.com csp ? 18 (pb ? free) 5000/tape & reel CM6317 6317 = CM6317 yyww = date code xxxx = last four digits of lot# wlcsp18 case 567cg ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d. electrical schematic 6317 yyww xxxx r gnd 1 of 7 filter channels + level 4 level 4
CM6317 http://onsemi.com 2 package / pinout diagrams bottom view (bumps up view) top view (bumps down view) + orientation marking a1 indicator table 1. pin descriptions a5 = line 1 a4 = line 2 a3 = gnd a2 = line 1 a1 = line 2 b5 = line 3 b3 = gnd b1 = line 3 c5 = line 4 c4 = line 5 c3 = gnd c2 = line 4 c1 = line 5 d5 = line 6 d4 = line 7 d3 = gnd d2 = line 6 d1 = line 7 electrical specifications and conditions table 2. parameters and operating conditions parameter rating units storage temperature range ?55 to +150 c operating temperature range ?40 to +85 c power dissipation at 70 c per channel 60 mw table 3. electrical operating characteristics (note 1) symbol parameter conditions min typ max units r resistance 56 70 84 c capacitance per line at 1 mhz, v in = 0 v 30 pf v br breakdown voltage i r = 1 ma 6 7.8 10 v i leak leakage current per channel v in = 3.0 v 10 100 na v esd esd protection peak discharge voltage a) contact discharge per iec 61000 ? 4 ? 2 standard b) air discharge per iec 61000 ? 4 ? 2 standard (note 2) 14 15 kv 1. all parameters specified at t a = 25 c unless otherwise noted. 2. standard iec 61000 ? 4 ? 2 with c discharge = 150 pf, r discharge = 330 .
CM6317 http://onsemi.com 3 rf characteristics t a = 25 c, dc bias = 0 v, 50 environment figure 1. frequency response ? filters 1 to 7
CM6317 http://onsemi.com 4 package dimensions wlcsp18, 1.96x1.56 case 567cg ? 01 issue o seating plane 0.05 c notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. coplanarity applies to spherical crowns of solder balls. 2x dim a min max 0.57 millimeters a1 d 1.96 bsc e b 0.24 0.29 e 0.40 bsc 0.63 d e a b pin a1 reference e a 0.05 b c 0.03 c 0.05 c 18 b 45 c b a 0.05 c a a1 a2 c 0.17 0.24 1.56 bsc 0.25 18x dimensions: millimeters *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 0.40 0.40 0.05 c 2x top view side view bottom view note 3 e a2 0.41 ref recommended package outline 123 pitch d pitch a1 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 CM6317/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
