ss62 thru ss610 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 6a surface mount schottky barrier rectifiers ss62 thru ss610 features z for surface mounted applications z low profile package z built-in strain relief z easy pick and place z plastic material used carries underwriters laboratory classification 94 v-0 z extremely low vf z majority carrier conduction z high temperature soldering: 250c/10 seconds at terminals mechanical data z case: molded plastic, do- 214ab (smc), dimensions in inches and (millimeters) z terminals: solder plated z polarity indicated by cathode band z weight 0.21 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol ss62 ss63 ss64 ss65 ss66 SS68 ss610 units maximum recurrent peak reverse voltage v rrm 20 30 40 50 60 80 100 v maximum rms voltage v rms 14 21 28 35 42 56 70 v maximum dc blocking voltage v dc 20 30 40 50 60 80 100 v maximum average forward rectified current see fig.1 i o 6.0 a maximum overload surge 8.3ms single half sine-wave i fsm 150 a typical junction capacitance (note 1) c j 300 pf typical thermal resistance (note 2) r jl 17 /w typical thermal resistance (note 2) r ja 55 /w storage temperature range t stg -55 to + 150 operating temperature range t op -55 to + 125 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol ss62 ss63 ss64 ss65 ss66 SS68 ss610 units maximum forward voltage at 6.0a and 25 v f 0.55 0.70 0.85 v maximum reverse current at 25 i r 1 ma note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0 v 2. p.c.b. mounted 0.55?0.55 ?(1414 mm ) 0.013mm thick copper pad areas 3. sma package suffix ? a? , smb package suffix ?b?, smc no suffix .060(1.52) .030(0.76) .320(8.13) .305(7.75) .103(2.62) .079(2.06) .280(7.11) .260(6.60) .245(6.22) .220(5.59) .126(3.20) .114(2.90) cathode www.datasheet.net/ datasheet pdf - http://www..co.kr/
ss62 thru ss610 page: 2 ratings and characteristic curve ss62 thru ss610 fig. 1 - forward current derating curve 8.0 6.0 4.0 2.0 0 average forward current amperes 0 25 50 75 100 125 150 175 single phase half wave 60h z resistive or inductive load lead temperature, p.c.b mounted on 0.30.3?(8.08.0mm) copper pad areas fig. 2 - typical instantaneous forward characteristics 20 10 1.0 0.1 instantaneous forward current amperes .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 instantaneous forward voltage, volts t j =25 pulse width=300us 1% duty cycle ss62~ss64 ss65~ss610 fig. 3a - typical reverse characteristics 100 10 1.0 .10 .01 .001 instantaneous reverse current, milliamperes 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage, (%) t j =125 t j =75 t j =25 ss62~ss64 100 10 1.0 .10 .01 .001 instantaneous reverse current, milliamperes 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage, (%) ss65~ss610 fig. 3b - typical reverse characteristics t j =150 t j = 75 www.datasheet.net/ datasheet pdf - http://www..co.kr/
|