LH22441-PF round type led lamps data sheet doc. no : qw0905- rev. : date : ligitek electronics co.,ltd. property of ligitek only - 2005 10 - sep. LH22441-PF a pb lead-free parts
ligitek electronics co.,ltd. property of ligitek only package dimensions note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation 0 -60 100%50% 75%25% -30 100% 25% 0 50%75% 30 60 part no.LH22441-PF page 1/5 3.85 3.55 3.1 0.5 5.28 4.28 1.5max 1.0min 2.54typ 0.5 typ 25.0min + -
absolute maximum ratings at ta=25 part no note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. typical electrical & optical characteristics (ta=25 ) forward current peak forward current duty 1/10@10khz operating temperature soldering temperature storage temperature reverse current @5v power dissipation peak wave length pnm material emitted 697 lens color viewing angle 2 1/2 (deg) spectral halfwidth nm luminous intensity @10ma(mcd) forward voltage @ ma(v) 4.5 min. max. 90 min. typ. 8.020 tstg tsol ir t opr -40 ~ +100 max 260 for 5 sec max (2mm from body) 10 -40 ~ +85 a i f pd i fp parameter symbol ma ma mw ratings unit ligitek electronics co.,ltd. property of ligitek only page 15 40 60 h red transparent LH22441-PF gap red 1.7 2.6 20 part no.LH22441-PF 2/5
r e l a t i v e i n t e n s i t y @ 2 0 m a 600 0.0 0.5 wavelength (nm) 700800900 ambient temperature( ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 1.0 -20 -40 0.8 1.0 0.9 1.1 1.2 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 -20 ambient temperature( ) 80 60 40 20 0-40 100 0.0 80 60 02040100 fig.4 relative intensity vs. temperature 2.5 1.5 1.0 2.0 3.0 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 100 f o r w a r d c u r r e n t ( m a ) 0.1 1.0 1.0 10 1000 h chip r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a forward voltage(v) 2.03.04.05.01.0 0.0 1.5 1.0 0.5 2.0 2.5 forward current(ma) 101001000 fig.2 relative intensity vs. forward current 3.0 ligitek electronics co.,ltd. property of ligitek only 1000 3/5 page part no.LH22441-PF
120 260 time(sec) temp( c) dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 3 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 260 c3sec max preheat 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) 3 /sec max 5 /sec max 25 ligitek electronics co.,ltd. property of ligitek only page 4/5 60 seconds max part no.LH22441-PF
ligitek electronics co.,ltd. property of ligitek only reference standard mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 description test condition test item reliability test: 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. low temperature storage test high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) operating life test this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. mil-std-202:103b jis c 7021: b-11 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. solder resistance test thermal shock test high temperature high humidity test 1.t.sol=230 5 2.dwell time=5 1sec solderability test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hous. this test intended to see soldering well performed or not. part no.LH22441-PF 5/5 page
|
