1 n-channel 60-v (d-s) mosfet features ? halogen-free acc ording to iec 61249-2-21 definition ? low on-resistance: 2 ? low threshold: 2 v (typ.) ? low input capacitance: 25 pf ? fast switching speed: 25 ns ? low input and output leakage ? trenchfet ? power mosfet ? 1 200 v esd protection ? compl iant to rohs directive 2002/95/ec ben e fits ? low offset voltage ? low-voltage operation ? easily driven without buffer ? high-speed circuits ? low error voltage applications ? direct logic-level interface: ttl/cmos ? drivers: relays, solenoids, lamps, hammers, display, memories, transistors, etc. ? battery oper ated systems ? solid-state relays p r oduct summary v ds (v) r ds( o n) ( )i d (m a) 60 2 at v gs = 10 v 30 0 t o-236 so t -23 1 2 3 t op vie w DTS2N7002 g s d note s: a. pulse width limited by ma ximum junction temp erature. b. surface mounted on fr4 board. * pb containing t erminations are not rohs compliant, exemptions may apply. ab solute maxi mum ratings t a = 25 c, unless otherwise noted p a rameter symbol l imit uni t dr ain-source voltage v ds 60 v gate-source v olta ge v gs 20 contin uous dr ain current (t j = 150 c) b t a = 25 c i d 300 ma t a = 100 c 190 pulsed d r ain current a i dm 800 p o wer dissipation b t a = 25 c p d 0.35 w t a = 100 c 0.14 maxim um j unction-to-ambient b r thja 350 c/w oper ating j unction and storage temperature range t j, t stg - 55 to 150 c www.din-tek.jp dt s2n7002
2 not es: a. for design aid only, not subject to production testing. b. p ulse test: pw 300 s duty cycle 2 %. c. switch ing time is essentially independent of ope rating temperature. st resses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. s pecif ications t a = 25 c, unless otherwise noted p aram eter sym bol t est co nditions limits unit min. typ. a max. static drain-source breakdo wn voltage v ds v gs = 0 v , i d = 10 a 60 v gate-thre shold voltage v gs(th) v ds = v gs , i d = 250 a 12 . 5 gate-b ody leakage i gss v ds = 0 v , v gs = 20 v 10 a v ds = 0 v , v gs = 15 v 1 v ds = 0 v , v gs = 10 v 1 5 0 na v ds = 0 v , v gs = 10 v , t j = 85 c 10 00 v ds = 0 v, v gs = 5 v 10 0 zero gate voltage drain current i dss v ds = 60 v , v gs = 0 v 1 a v ds = 6 0 v, v gs = 0 v , t j = 125 c 500 on-state drain current a i d( on) v gs = 10 v , v ds = 7.5 v 800 ma v gs = 4.5 v , v ds = 10 v 500 drain-source on-resistance a r ds( on) v gs = 10 v , i d = 500 ma 2 v gs = 4.5 v , i d = 200 ma 4 f orw ard transconductance a g fs v ds = 10 v , i d = 200 ma 100 ms diode f orward voltage v sd i s = 200 ma , v gs = 0 v 1.3 v dy nam ic a t o tal gate charge q g v ds = 10 v , v gs = 4.5 v i d ? 250 ma 0.4 0 .6 nc input capacitance c iss v ds = 25 v , v gs = 0 v f = 1 mhz 30 pf output c apacitance c os s 6 re v erse transfer capacitance c rss 2.5 switc h ing a, b , c tu r n - o n t i m e t d( on) v dd = 30 v , r l = 150 i d ? 200 ma , v gen = 10 v , r g = 10 25 ns t ur n-off time t d( off) 35 www.din-tek.jp dt s2n7002
3 typica l c haracteristics 25 c, unless otherwise noted output ch ar acteristics on-resistance vs. drain current gate charge 0.0 0.2 0.4 0.6 0.8 1.0 012 345 v ds - dr ain-to-source voltage (v) - dr ain current (a) i d v gs = 10 v 3 v 5 v 4 v 6 v 7 v 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 200 400 600 800 1000 i d - dr ain current (ma) v gs = 4.5 v v gs = 10 v - on-resistance ( ) r ds(on) 0 1 2 3 4 5 6 7 0.0 0.1 0.2 0.3 0.4 0.5 0.6 v ds = 10 v i d = 250 ma - gate-to-source v oltage (v) q g - t otal gate charge (nc) v gs trans f er characteristics capacitance on-resistance vs. junction temperature 0 300 600 900 1200 0123456 v gs - gate-to-source v oltage (v) - dr ain current (ma) i d t j = - 55 c 125 c 25 c 0 8 16 24 32 40 0 5 10 15 20 25 v ds - dr ain-to-source voltage (v) c - capacitance (pf) c rss c os s c is s v gs = 0 v 0.0 0.4 0.8 1.2 1.6 2.0 - 50 - 25 0 2 5 5 0 7 5 100 125 150 t j - j unction temperature (c) v gs = 10 v at 500 ma v gs = 4.5 v at 200 ma (nor maliz ed) - on-resistance r ds(on) www.din-tek.jp dt s2n7002
4 ty pi cal characteristics 25 c, unless otherwise noted sou r ce-drain diode forward voltage threshold voltage variance over temperature 1.2 1.5 1 100 1000 0.0 0.3 0.6 0.9 t j = 125 c v sd - source-to-dr ain voltage (v) - source current (a) i s 10 t j = - 55 c v gs = 0 v t j = 25 c v ar iance (v) v gs(th) - 0.8 - 0.6 - 0.4 - 0.2 0.0 0.2 0.4 - 50 - 25 0 2 5 5 0 7 5 100 125 150 i d = 250 a t j - j unction temperature (c) on-r esistan ce vs. gate-source voltage single pulse power, junction-to-ambient 0 1 2 3 4 5 02468 10 v gs - gate-to-source voltage (v) i d = 500 ma i d = 200 ma - on-resistance ( ) r ds(on) 0.01 0 1 2.5 3 100 600 0.1 p o wer (w) time (s) 1.5 2 0.5 1 10 t a = 25 c norm alize d thermal transient impedance, junction-to-ambient 10 10 -3 10 -2 1 1 0 600 10 -1 -4 100 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 square wave pulse duration (s) nor maliz ed ef fective t ransient thermal impedance 1. duty cycle , d = 2. per unit base = r th ja = 350 c/w 3. t jm - t a = p dm z thj a (t) t 1 t 2 t 1 t 2 notes: 4. surface mounted p dm www.din-tek.jp dt s2n7002
. n o rmalized thermal transient impedance, junction-to-foot 10 -3 10 -2 1 10 10 -1 10 -4 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 square wa ve pulse duration (s) normaliz ed e f f ective t ransient thermal impedance 5 th e rm a l ratings (t a = 25 c, un le ss ot he rwi se no ted) no t e ? t he ch ar ac te ris ti cs sh o wn in the two gr aphs - nor malized tra ns i ent th ermal impedance junction- to -ambient ( 25 c) - normalized transi ent thermal impedance junction- to -foot ( 25 c ) ar e gi ve n for general gui de l in es on ly to e nab le the us er to ge t a ba ll park indication of part capabil it ie s. the data are ex tra ct ed from sin gle pu lse tr a ns i ent th ermal im pedan ce charac ter is ti cs wh ich are de ve loped fr om empirical m ea s ur em ent s. the la tt er is va lid for the p art mounte d on printed cir cuit board - fr 4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. the part ca pa b i li t i e s c an widely vary depending on ac tu al a ppl ic at i on par am ete rs and operati ng c o n ditio n s. www.din-tek.jp dt s2n7002
1 sot-23 ( t o-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pla ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pla ne 0.25 mm dim millimet ers inches mi n max mi n max a 0 .89 1.12 0.0 35 0.044 a 1 0 .01 0.10 0.0004 0.004 a 2 0 .88 1.02 0.0 346 0.040 b 0. 35 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3.04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1 .20 1.40 0.047 0.055 e 0.95 bsc 0.0 3 74 ref e 1 1.90 bsc 0.0 748 ref l 0 .40 0.60 0.016 0.024 l 1 0.6 4 ref 0. 025 ref s 0.50 ref 0.020 ref q 3 8 38 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479 package information www.din-tek.jp
1 application note rec ommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index r etur n to index application note www.din-tek.jp
1 disclaimer all prod uct, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertech nology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. legal disclaimer notice www.din-tek.jp
|
