61 pa shorouded header (top entry type) retainer retainer retainer paf receptacle (idc style) pal (crimp style wire-to-wire) paf receptacle (idc style) retainer pa receptacle (crimp style retainer mountable type) pa receptacle (crimp style standard type) pa shorouded header (side entry type) pa shorouded header (top entry type) features ?secure locking device the housing has a locking device to prevent accidental disconnection because of routing of wires or of vibration, and also reverse and different circuit numbers mating. ?interchangeable between crimp and idc socket both crimp and idc sockets use the same headers and wire-to- wire mating halves. ?secondary retainers secondary retainers enhance safety in case of partial insertion or accidental release of the contact. ?harness variation pal, wire-to-wire crimp style connector, increases wire harness variation. pa connector (standard type, retainer mountable type) ?highly reliable contact the box contact supplies stable contact performance even under conditions of vibration, distortion, low voltage or low current. ?insertion guide mechanism header has housing insertion guides for easy and secure insertion. ?flanged press pin top entry type header has flanged press pins, preventing accidental removal of the pins that might result from the distorted unmating especially in the case of small no. of circuits. paf connector ?the industry s first secure lock idc connectors by separating id section and secure lock section, the industry s first secure lock specification has been achieved for idc that was said to be impossible. our fully automatic idc machines, bcd-m5bp (for simple harness) and cam-m12b, sad-m12e (for multi- harness), can be applied for harness making. ?metallic strain relief metallic strain relief on the contact securely grips wire insulation that can avoid direct stress of vibration or impact. the same grip strength as insulation barrel of crimp style contact could be achieved. ?retainer with four locking points the new four locking points design ensures wire retention force of every direction that is almost superior to contact retention force of crimp style connectors. it also completely covers exposed terminated id contact. pal connector ?the industry s first wire to wire 2.0mm (.079") pitch retainer mountable type connector. ?either with or without panel lock can be selected according to application. * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 pa family series/pa?af?al connector 2.0mm (.079") pitch wire-to-board (crimp style/idc) / wire-to-wire (crimp style/idc) based upon wire-to-board crimp style pa connectors, the pa series family of connector have been expanded to meet the requirement of complex wire harness of 2.0mm (.079") pitch connectors with secure locking mechanism thanks to the additional line up of wire-to-board idc style paf connectors and wire-to-wire crimp style pal connectors.
62 pa family series /pa paf pal connector list of combinations crimp style retainer mountable type insulation displacement type crimp style standard type contact spa - 001t - p0.5 housing parp - ( )v retainer pms - ( )v - s contact sphd - 001t - p0.5 sphd - 002t - p0.5 housing pap-( )v-s receptacle ( )paf - 6s retainer pafs - ( )v - s wire to wire connectors high box type smt type top entry type side entry type top entry type side entry type shrouded header # .
|