View N150X3-L08_6655427.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 2 / 29 version 2.1 - contents - revision history 1. general description 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics 3.1 tft lcd module 3.2 backlight unit 4. block diagram 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment 5.1 tft lcd module 5.2 backlight unit 5.3 timing diagram of lvds input signal 5.4 color data input assignment 6. interface timing 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics 7.1 test conditions 7.2 optical specifications 8. precautions 8.1 assembly and handling precautions 8.2 safety precautions 9. definition of labels 9 .1 cmo module label 9.2 cmo carton label 10. packaging 10 .1 packing specification 10.2 packing method www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 3 / 29 version 2.1 revision history version date page (new) section description 1.0 2.0 2.1 nov.18.?04 sep.27 ?05 nov. 15,?05 all all all all all all preliminary specification was first issue. approval specification was first issued approval spec rev c2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 4 / 29 version 2.1 1. general description 1.1 overview n150x3 - l08 is a 15.0? tft liquid crystal display rohs module with single ccfl backlight unit and 30 pins lvds interface. this module supports 1024 x 768 xga mode and can display 262,144 colors. the optimum viewing angle is at 6 o?clock direction. th e inverter module for backlight is not built in. 1.2 features - thin and light weight - xga (1024 x 768 pixels) resolution - de only mode - 3.3v lvds (low voltage differential signaling) interface with 1 pixel/clock 1.3 application - tft lcd notebook 1.4 general specificati0ns item specification unit note active area 304.1 (h) x 228.1 (v) (15.0? diagonal) mm bezel opening area 307.8 (h) x 231.6 (v) mm (1) driver element a-si tft active matrix - - pixel number 1024 x r.g.b. x 768 pixel - pixel pitch 0.297 (h) x 0.297 (v) mm - pixel arrangement rgb vertical stripe - - display colors 262,144 color - transmissive mode normally white - - surface treatment hard c oating (2h), glare type - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 316.8 317.3 317.8 mm vertical(v) 241.5 242 242.5 mm module size depth(d) 5.4 5.7 6.0 mm (1) weight 535 550 565 g - note (1) please refer to the attached drawings for more information of front and back outline dimensions. www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 5 / 29 version 2.1 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 200/2 g/ms (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) (a) 90 %rh max. (ta Q 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel surface should be 0 min. and 50 max. note (3) 1 time for x, y, z. for condition (200g / 2ms) is half sine wave,. note (4) 10~200 hz, 0.5hr /cycle 1cycle for x,y,z note (5) at testing vibration and shock, the fixt ure in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. the fixing condition is shown as below: side mount fixing screw side mount fixing screw stage bracket lcd module gap=2mm a t room tem p erature storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 6 / 29 version 2.1 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage v cc -0.3 +4.0 v logic input voltage v in -0.3 v cc +0.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = 6.0 ma lamp current i l 2 6.5 ma rms lamp frequency f l 45 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to 3.2 for further information). 3. electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 3.0 3.3 3.6 v - ripple voltage v rp - 100 - mv - rush current i rush - - 1.5 a (2) white - 300 350 ma (3)a power supply current black lcc - 350 400 ma (3)b ?h? level v il - - +100 mv - logical input voltage (lvds) ?l? level v ih -100 - - mv - terminating resistor r t - 100 - ohm - power per ebl wg p ebl - 3.224 - w (4) note (1) the module should be always operated within above ranges. note (2) measurement conditions: r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 7 / 29 version 2.1 note (3) the specified power supply current is under the conditions at vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power are the sum of lcd p anel electronics input power and the inverter input power. test conditions are as follows. (a) vcc = 3.3 v, ta = 25 2 oc, f v = 60 hz, (b) the pattern used is a black and white 32 x 36 checkerboard, slide #100 from the vesa file ?flat panel display monitor setup patterns?, fpdmsu.ppt. (c) luminance: 60 nits. (d) the inverter used is provided from o2 micro (www.o2micro.com). please contact o2mirco for detail information. cmo doesn?t provide the inverter in this product. vcc rising time is 470us 470us +3.3v gnd 0.9vcc 0.1vcc active area a. white pattern active area b. black pattern www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 8 / 29 version 2.1 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 627 660 693 v rms i l = 6.0 ma lamp current i l 2.0 6.0 6.5 ma rms (1) --- --- 1110 (25 o c) lamp turn on voltage v s --- --- 1330 (0 o c) v rms (2) operating frequency f l 45 60 80 khz (3) lamp life time l bl 15,000 --- --- hrs (5) power consumption p l --- 3.96 --- w (4), i l = 6.0 ma note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) the voltage that must be larger than vs should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (3) the lamp frequency may produce interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l v l note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 o c and i l = 6.0 marms until one of t he following events occurs: (a) when the brightness becomes or lower than 50% of its original value. (b) when the effective ignition length becomes or lower than 80% of its original value. (effective ignition length is defined as an area that ha s less than 70% brightness compared to the brightness in the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. lcd module 1 inverter a current meter hv (white) lv (black) 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 9 / 29 version 2.1 the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within 2 10%; the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 10 / 29 version 2.1 3.3 edid data the following data is based on vesa enhanced edid proposal. byte #(decimal) byte #(hex) field name and comments value(hex) value(binary) 0 0 header 00 00000000 1 1 header ff 11111111 2 2 header ff 11111111 3 3 header ff 11111111 4 4 header ff 11111111 5 5 header ff 11111111 6 6 header ff 11111111 7 7 header 00 00000000 8 8 eisa id manufacturer name (?cmo?) 0d 00001101 9 9 eisa id manufacturer name (compressed ascii) af 10101111 10 0a id product code (N150X3-L08) 11 00010001 11 0b id product code (hex lsb first; N150X3-L08) 15 00010101 12 0c id s/n (fixed ?0?) 00 00000000 13 0d id s/n (fixed ?0?) 00 00000000 14 0e id s/n (fixed ?0?) 00 00000000 15 0f id s/n (fixed ?0?) 00 00000000 16 10 week of manufacture (fixed ?00h?) 00 00000000 17 11 year of manufacture (fixed ?00h?) 00 00000000 18 12 edid structure version # (?1?) 01 00000001 19 13 edid revision # (?3?) 03 00000011 20 14 video i/p definition (?digital?) 80 10000000 21 15 max h image size (?30.4128 cm?) 1e 00011110 22 16 max v image size (?22.8096 cm?) 17 00010111 23 17 display gamma (gamma = ?2.2?) 78 01111000 24 18 feature support (?active off, rgb color?) 0a 00001010 25 19 red/green (rx1, rx0, ry1, ry0, gx1, gx0, gy1, gy0) 77 01110111 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 11 / 29 version 2.1 26 1a blue/white (bx1, bx0, by1, by0, wx1, wx0, wy1, wy0) f1 11110001 27 1b red-x (rx = ?0.626?) a0 10100000 28 1c red-y (ry = ?0.355?) 5a 01011010 29 1d green-x (gx = ?0.294?) 4b 01001011 30 1e green-y (gy = ?0.589?) 96 10010110 31 1f blue-x (bx = ?0.144?) 24 00100100 32 20 blue-y (by = ?0.097?) 18 00011000 33 21 white-x (wx = ?0.309?) 4f 01001111 34 22 white-y (wy = ?0.329?) 54 01010100 35 23 established timings 1 00 00000000 36 24 established timings 2 (1024x768@60hz) 08 00001000 37 25 manufacturer?s reserved timings 00 00000000 38 26 standard timing id # 1 01 00000001 39 27 standard timing id # 1 01 00000001 40 28 standard timing id # 2 01 00000001 41 29 standard timing id # 2 01 00000001 42 2a standard timing id # 3 01 00000001 43 2b standard timing id # 3 01 00000001 44 2c standard timing id # 4 01 00000001 45 2d standard timing id # 4 01 00000001 46 2e standard timing id # 5 01 00000001 47 2f standard timing id # 5 01 00000001 48 30 standard timing id # 6 01 00000001 49 31 standard timing id # 6 01 00000001 50 32 standard timing id # 7 01 00000001 51 33 standard timing id # 7 01 00000001 52 34 standard timing id # 8 01 00000001 53 35 standard timing id # 8 01 00000001 54 36 detailed timing description # 1 pixel clock (?65 mhz?) 64 01100100 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 12 / 29 version 2.1 55 37 # 1 pixel clock (hex lsb first) 19 00011001 56 38 # 1 h active (?1024?) 00 00000000 57 39 # 1 h blank (?320?) 40 01000000 58 3a # 1 h active : h blank (?1024 : 320?) 41 01000001 59 3b # 1 v active (?768?) 00 00000000 60 3c # 1 v blank (?38?) 26 00100110 61 3d # 1 v active : v blank (?768 : 38?) 30 00110000 62 3e # 1 h sync offset (?24?) 18 00011000 63 3f # 1 h sync pulse width (?136?) 88 10001000 64 40 # 1 v sync offset : v sync pulse width (?3 : 6?) 36 00110110 65 41 # 1 h sync offset : h sync pulse width : v sync offset : v sync width (?24 : 136 : 3 : 6?) 00 00000000 66 42 # 1 h image size (?304.128 mm?) 30 00110000 67 43 # 1 v image size (?228.096 mm?) e4 11100100 68 44 # 1 h image size : v image size (?304 : 228?) 10 00010000 69 45 # 1 h boarder (?0?) 00 00000000 70 46 # 1 v boarder (?0?) 00 00000000 71 47 # 1 flags (?non-interlace, non-stereo, digital separate?) 18 00011000 72 48 detailed timing description # 2 00 00000000 73 49 # 2 flag 00 00000000 74 4a # 2 reserved 00 00000000 75 4b # 2 fe (hex) defines ascii string (model name ?n150x3?, ascii) fe 11111110 76 4c # 2 flag 00 00000000 77 4d # 2 1 st character of string (?n?) 4e 01001110 78 4e # 2 2 nd character of string (?1?) 31 00110001 79 4f # 2 3 rd character of string (?5?) 35 00110101 80 50 # 2 4 th character of string (?0?) 30 00110000 81 51 # 2 5 th character of string (?x?) 58 01011000 82 52 # 2 6 th character of string (?3?) 33 00110011 83 53 # 2 new line character # 2 indicates end of ascii string 0a 00001010 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 13 / 29 version 2.1 84 54 # 2 padding with ?blank? character 20 00100000 85 55 # 2 padding with ?blank? character 20 00100000 86 56 # 2 padding with ?blank? character 20 00100000 87 57 # 2 padding with ?blank? character 20 00100000 88 58 # 2 padding with ?blank? character 20 00100000 89 59 # 2 padding with ?blank? character 20 00100000 90 5a detailed timing description # 3 00 00000000 91 5b # 3 flag 00 00000000 92 5c # 3 reserved 00 00000000 93 5d # 3 fe (hex) defines ascii string (vendor ?cmo?, ascii) fe 11111110 94 5e # 3 flag 00 00000000 95 5f # 3 1 st character of string (?c?) 43 01000011 96 60 # 3 2 nd character of string (?m?) 4d 01001101 97 61 # 3 3 rd character of string (?o?) 4f 01001111 98 62 # 3 new line character # 3 indicates end of ascii string 0a 00001010 99 63 # 3 padding with ?blank? character 20 01011000 100 64 # 3 padding with ?blank? character 20 00100000 101 65 # 3 padding with ?blank? character 20 00100000 102 66 # 3 padding with ?blank? character 20 00100000 103 67 # 3 padding with ?blank? character 20 00100000 104 68 # 3 padding with ?blank? character 20 00100000 105 69 # 3 padding with ?blank? character 20 00100000 106 6a # 3 padding with ?blank? character 20 00100000 107 6b # 3 padding with ?blank? character 20 00100000 108 0a detailed timing description # 4 00 00000000 109 6d # 4 flag 00 00000000 110 6e # 4 reserved 00 00000000 111 6f # 4 fc (hex) defines monitor name (model name?N150X3-L08?, ascii) fc 11111100 112 70 # 4 flag 00 00000000 113 71 # 4 1 st character of name (?n?) 4e 01001110 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 14 / 29 version 2.1 114 72 # 4 2 nd character of name (?1?) 31 00110001 115 73 # 4 3 rd character of name (?5?) 35 00110101 116 74 # 4 4 th character of name (?0?) 30 00110000 117 75 # 4 5 th character of name (?x?) 58 01011000 118 76 # 4 6 th character of name (?3?) 33 00110011 119 77 # 4 7 th character of name (?-?) 2d 00101101 120 78 # 4 8 th character of name (?l?) 4c 01001100 121 79 # 4 9 th character of name (?0?) 30 00110000 122 7a # 4 9 th character of name (?8?) 38 00111000 123 7b # 4 new line character # 4 indicates end of ascii string 0a 00001010 124 7c # 4 padding with ?blank? character 20 00100000 125 7d # 4 padding with ?blank? character 20 00100000 126 7e extension flag 0 00000000 127 7f checksum 75 01110101 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 15 / 29 version 2.1 4. block diagram 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment 5.1 tft lcd module pin symbol description polarity remark 1 vss ground 2 vcc power supply +3.3 v (typical) 3 vcc power supply +3.3 v (typical) 4 v edid ddc 3.3v power ddc 3.3v power 5 nc non-connection 6 clk edid ddc clock ddc clock 7 data edid ddc data ddc data 8 rxin0- lvds differential data input negative 9 rxin0+ lvds differential data input positive r0~r5,g0 - 10 vss ground 11 rxin1- lvds differenti al data input negative 12 rxin1+ lvds differential data input positive g1~g5, b0, b1 - 13 vss ground 14 rxin2- lvds differential data inpu t negative b2~b5, de, hsync, vsync 1 hv (white) 2 lv ( black ) v edid data edid vcc gnd v l clk(+/-) rxin2(+/-) rxin1(+/-) rxin0(+/-) tft lcd panel (1024xr.g.b.x768) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage generator input connector (jae-fi-xb30s-hf10) lamp connector (jst-bhsr-02vs-1) edid eeprom clk edid www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 16 / 29 version 2.1 15 rxin2+ lvds differential data input positive 16 vss ground 17 clk- lvds clock data input negative 18 clk+ lvds clock data input positive lvds level clock 19 vss ground 20 nc non-connection 21 nc non-connection 22 vss ground 23 nc non-connection 24 nc non-connection 25 vss ground 26 nc non-connection 27 nc non-connection 28 vss ground 29 nc non-connection 30 nc non-connection note (1) connector part no.: j ae-fi-xb30s-hf10 or equivalent note (2) user?s connector part no: fi-x30m or equivalent note (3) the first pixel is even. 5.2 backlight unit pin symbol description color 1 hv high voltage white 2 lv ground black note (1) connector part no.: jst- bhsr-02vs-1 or equivalent note (2) user?s connector part no.: sm02b-bhss-1-tb or equivalent 5.3 timing diagram of lvds input signal in6 in5 in4 in3 in2 in1 in0 in13 in12 in11 in10 in9 in8 in7 in20 in19 in18 in17 in16 in15 in14 g0 r3 r2 r1 r0 r5 r4 b1 g4 g3 g2 g1 b0 g5 de b5 b4 b3 b2 vsync hsync t/7 signal for 1 dclk cycle (t) rxin0 rxin1 rxin2 clk+ www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 17 / 29 version 2.1 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0)/dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0)/dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage 6. interface timing 6.1 input signal timing specifications the specifications of input signal timing are as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc 50 65 68 mhz - vertical total time tv 771 806 850 th - vertical addressing ti me tvd 768 768 768 th - horizontal total time th 1200 1344 1500 tc - de horizontal addressing time thd 1024 1024 1024 tc - www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 18 / 29 version 2.1 input signal timing diagram 6.2 power on/off sequence timing specifications: 0 < t1 Q 10 msec 0 < t2 Q 50 msec 0 < t3 Q 50 msec t4 R 500 msec t5 R 200 msec t6 R 200 msec note (1) please avoid floating state of interface signal at invalid period. note (2) when the interface signal is invalid, be sure to pull down the power supply of lcd vcc to 0 v. - power supply for lcd, vcc - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off t h t c dclk t hd t vd t v de de data www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 19 / 29 version 2.1 note (3) the backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. the backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid. www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 20 / 29 version 2.1 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 6.0 ma inverter driving frequency f l 61 khz inverter h05-4915 the relative measurement methods of optical c haracteristics are shown in 6.2. the following items should be measured under the test conditions descri bed in 6.1 and stable environment shown in note (6). 7.2 optical specifications item symbol condition min. typ. max. unit note rx 0.599 --- red ry 0.344 --- gx 0.307 --- green gy 0.534 --- bx 0.152 --- blue by 0.129 --- wx 0.313 --- color chromaticity white wy typ -0.03 0.329 typ +0.03 --- (1), (5) center luminance of white lc 170 200 --- cd/m 2 (4), (5) contrast ratio cr x =0 , y =0 cs-1000t 250 350 --- --- (2), (5) t r --- 5 10 ms response time t f x =0 , y =0 --- 11 16 ms (3) white variation w x =0 , y =0 ca-210 --- 1.25 1.40 % (6) x + 40 45 --- horizontal x - 40 45 --- y + 15 20 --- viewing angle vertical y - cr 10 ca-210 40 45 --- deg. (1), (5) www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 21 / 29 version 2.1 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gra y level 63 gra y level 0 gra y level 63 time t f optical response tr 66.67 ms 66.67 ms www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 22 / 29 version 2.1 note (4) definition of luminance of white (lc): measure the luminance of gray level 63 at 5 points lc = l (5) l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 15 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] d w active area vertical line horizontal line : test point x=1 to 5 5 12 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x ca210 cs-1000t fi e l d o f vi e w= 500 mm lcd lcd panel center of the light shield room (ambient luminance < 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 23 / 29 version 2.1 8. precautions 8.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or c ontacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slow ly, and the starting voltage of ccfl will be higher than room temperature. 8.2 safety precautions (1) the startup voltage of backlight is approximat ely 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage. www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 24 / 29 version 2.1 9. definition of labels 9.1 cmo module label the barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) model name: n150x3 - l08 (b) revision: rev. xx: es : a1, a2, a3,?, etc. cs & mp : c1, c2, c3,?,etc. note: it will happen that revision code changed without product changed in developing duration because of cmo internal stage change, for example: ax ? b1, bx ? c1. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 0 ~ 9, for 2000 ~ 2009. month: 1 ~ 9, a ~ c, for jan. ~ dec. day: 1 ~ 9, a ~ y, for 1 st to 31 st , exclude i, o and u. (b) revision code: cover all the changes. (c) serial no.: manufacturing sequence of product. (d) product line: 1 -> line1, 2 -> line 2, ?etc. product line year, month, date cmo internal use revision cmo internal use serial no. chi mei optoelectronics made in taiwan n150x3 - l08 rev. c2 x x x x x x x y m d l n n n n made in taiwan e207943 www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 25 / 29 version 2.1 9.2 cmo carton label www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 26 / 29 version 2.1 10.packing 10.1 carton www.datasheet.net/ datasheet pdf - http://www..co.kr/
issued date: nov,15 2005 model no.: n150x3 - l08 approval 27 / 29 version 2.1 10.2 pallet www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.datasheet.net/ datasheet pdf - http://www..co.kr/
www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of N150X3-L08

	To Download N150X3-L08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .