LH3330-PF doc. no : qw0905- rev. : date : data sheet ligitek electronics co.,ltd. property of ligitek only round type led lamps pb - 2006 10 - may b LH3330-PF lead-free parts
directivity radiation note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. package dimensions ligitek electronics co.,ltd. property of ligitek only 5.0 5.9 25.0min 0.5 typ 1.0min 2.54typ - + 7.6 8.6 1.5max LH3330-PF part no.page1/5
t opr -40 ~ +85 operating temperature typical electrical & optical characteristics (ta=25 ) max. forward voltage @20ma(v) 2.6 note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. red emitted LH3330-PF gap part nomaterial red diffused 6971.7 color lens peak wave length pnm min. storage temperature tstg -40 ~ +100 4.5 3.028 viewing angle 2 1/2 (deg) luminous intensity @ ma(mcd) typ. 10 min. ligitek electronics co.,ltd. property of ligitek only ratings peak forward current duty 1/10@10khz reverse current @5v power dissipation forward current parameter ir pd i fp i f symbol absolute maximum ratings at ta=25 part no. a 10 40 mw 15 60 ma ma h unit page 2/5 LH3330-PF spectral halfwidth ? nm 90
r e l a t i v e i n t e n s i t y @ 2 0 m a 600 0.0 0.5 wavelength (nm) 700800900 ambient temperature( ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 1.0 -20 -40 0.8 1.0 0.9 1.1 1.2 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 -20 ambient temperature( ) 80 60 40 20 0-40 100 0.0 80 60 02040100 fig.4 relative intensity vs. temperature 2.5 1.5 1.0 2.0 3.0 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 100 f o r w a r d c u r r e n t ( m a ) 0.1 1.0 1.0 10 1000 h chip r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a forward voltage(v) 2.03.04.05.01.0 0.0 1.5 1.0 0.5 2.0 2.5 forward current(ma) 101001000 fig.2 relative intensity vs. forward current 3.0 ligitek electronics co.,ltd. property of ligitek only 1000 3/5 part no. page LH3330-PF
page 4/5 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) ligitek electronics co.,ltd. property of ligitek only 150 time(sec) 260 c3sec max 260 temp( c) 2 /sec max 100 50 preheat 120 25 0 0 note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 5 /sec max dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 60 seconds max part no.LH3330-PF
this test intended to see soldering well performed or not. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this test is the resistance of the device under tropical for hours. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solderability test 1.t.sol=230 5 2.dwell time=5 1sec solder resistance test thermal shock test high temperature high humidity test 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202:103b jis c 7021: b-11 the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. ligitek electronics co.,ltd. property of ligitek only operating life test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) low temperature storage test high temperature storage test 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) reliability test: test itemtest condition description page 5/5 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard part no.LH3330-PF
|
