TND306S no.7439-1/4 features ? inverter buffer. ? monolithic structure(high voltage cmos process adopted). ? withstand voltage of 25v is assured. ? wide range of operating voltage : 4.5v to 25v. ? peak outpout current : 1a. ? fast switching time(30ns typical at 1000pf load). ? fully compatible input to ttl/cmos. (v ih =not more than 2.6v, at v dd =4.5 to 25v) specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit supply voltage v dd 0 to 25 v input voltage v in gnd--0.3 to v dd +0.3 v allowable power dissipation p d max 0.3 w junction temperature tj --55 to +150 c storage temperature tstg --55 to +150 c recommended operating conditions at ta=25 c parameter symbol conditions ratings unit operating supply voltage v dd 4.5 to 25 v operating temperature topr --40 to +125 c electrical characteristics (ac characteristics) at ta=25 c, v dd =18v, v in =5v ratings parameter symbol conditions min typ max unit turn-on rise time t r c l =1000pf 30 45 ns turn-off fall time t f c l =1000pf 30 45 ns delay time t d 1c l =1000pf 30 45 ns t d 2c l =1000pf 45 60 ns sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7439a TND306S package dimensions unit : mm 2199 [TND306S] 62003 ts im ta-100708 / 32803 ts im ta-3962 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. expd (excellent power device) general purpose driver for pdp sustain pulse drive, dc / ac motor drive, switching power supply, dc / dc converter applications preliminary 14 5 8 4.4 0.3 6.0 0.2 5.0 0.595 1.27 1.5 0.1 1.8max 0.43 1 : nc 2 : in a 3 : gnd 4 : in b 5 : out b 6 : vdd 7 : out a 8 : nc sanyo : sop8
TND306S no.7439-2/4 electrical characteristics (dc characteristics) at ta=25 c, v dd =4.5 to 25v ratings parameter symbol conditions min typ max unit logic 1 input voltage v ih 2.6 v logic 0 input voltage v il 0.8 v input bias current i in v in =0 or v dd -- 1 1 m a high level output voltage v oh i o =0 v dd --0.1 v low level output voltage v ol i o =0 0.1 v v dd supply current isupp v dd =10v, v in =3v, (both inputs) 1.0 4.5 ma v dd =10v, v in =0, (both inputs) 0.2 ma output high short circuit pulsed current i o +v dd =18v, pw 10 m s, v out =0 1.0 a output low short circuit pulsed current i o -- v dd =18v, pw 10 m s, v out =18v 1.0 a output on resistance rout v dd =18v, iload=10ma, v out =h 8 12 w v dd =18v, iload=10ma, v out =l 6 10 w block diagram switching time measuring circuit v dd in out inverting non-inverting gnd 90% input input rise and fall times=5ns inverting output noninverting output 90% 90% 10% 10% 10% +5v +0.4v +18v 0v +18v 0v 0.1 f output a 1000pf 1000pf output b input a input b 4.7 f t r t f t d 1 t d 2 v dd =18v TND306S 10% 10% 90% 90% t r t f t d 1 t d 2
TND306S no.7439-3/4 20 25 30 35 40 45 50 0 5 10 15 20 25 30 20 25 30 35 40 45 50 0 5 10 15 20 25 30 0 5 10 15 20 25 30 10 20 30 40 50 60 10 20 30 40 50 60 70 80 90 100 --50 0 50 100 150 0 10 15 20 25 30 35 40 45 50 --50 0 50 100 150 15 20 25 30 35 40 45 50 --50 0 50 100 150 10 20 30 40 50 60 70 15 20 25 30 35 40 45 50 v dd =18v v in =5v c l =1000pf v in =5v c l =1000pf 0 5 10 15 20 25 30 v dd =18v v in =5v c l =1000pf v in =5v c l =1000pf v dd =18v v in =5v c l =1000pf v in =5v c l =1000pf v in =5v c l =1000pf v dd =18v v in =5v c l =1000pf --50 0 50 100 150 t d 1 -- tc t d 1 -- v dd t r -- tc t r -- v dd t f -- tc t f -- v dd t d 2 -- t c t d 2 -- v dd turn-on rise time, t r -- ns case temperature, tc -- c turn-on rise time, t r -- ns supply voltage, v dd -- v turn-off fall time, t f -- ns case temperature, tc -- c turn-off fall time, t f -- ns supply voltage, v dd -- v delay time, t d 1 -- ns case temperature, tc -- c delay time, t d 1 -- ns supply voltage, v dd -- v delay time, t d 2 -- ns case temperature, tc -- c delay time, t d 2 -- ns supply voltage, v dd -- v it05652 it05653 it05648 it05649 it05650 it05651 it05654 it05655
TND306S no.7439-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2003. specifications and information herein are subject to change without notice. ps 0.4 0.6 0.8 1.0 1.2 1.4 --50 0 50 100 150 v dd =18v 0.4 0.6 0.8 1.0 1.2 1.4 --50 0 50 100 150 v dd =18v 0 0 20 40 60 80 100 120 140 160 0 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 it03760 p d -- ta i o (+) -- tc i o (--) -- tc output "high" short circuit pulsed current, i o (+) -- a output "low" short circuit pulsed current, i o (--) -- a case temperature, tc -- c allowable power dissipation, p d -- w ambient temperature, ta -- c case temperature, tc -- c it05657 it05656
|
