www.ledidea.com * speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 2005g 0510 t -1, (3-mm) round, pcb mount right angle indicator, g61udb/x series the g61udb/x has the lamp located at a nominal 2.3 mm(0.09") above the pcb. this series can be supplied with pinout reversed from that shown by adding ?-rl? to the order code. specify part desired as follows: g61udb/order code for example: ?g61udb/g? designates an assembly with a diffused green led. ?g61udb/g-rl? designates the same assembly with pins reversed order code and information (all ratings at 25c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code p eak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required hi eff red i 635 2.0 10 60 10-20 green g 565 2.1 10 60 10-20 y ellow y 585 2.0 10 60 10-20 orange o 610 2.0 10 60 10-20 tinted transparent high brightness hi eff red it 635 2.0 40 40 10-20 green gt 565 2.1 40 40 10-20 y ellow yt 585 2.0 40 40 10-20 tinted diffused f or 2ma operation hi eff red i2 635 2.0 1.0 @ 2ma 60 2-10 green g2 565 2.1 1.0 @ 2ma 60 2-10 y ellow y2 585 2.0 1.0 @ 2ma 60 2-10 tinted diffused 5v operation hi eff red i5 635 - 10 60 5 v green g5 565 - 10 60 5 v y ellow y5 585 - 10 60 5 v white diffused bipolar, bicolor red/green eg 635/565 2.0/2.1 4 / 4 90 10-20 y ellow/green yg 585/565 2.0/2.1 4 / 4 90 10-20 red/yellow ey 635/585 2.0/2.0 4 / 4 90 10-20 (typ for bi-color) green anode red or yellow anode + ? (typ for single color) 6.35 2.5.5 3.0 ?* 5.08 ref 2.54 + ? 7.4 2.3 4.6 3.5 min
|