crystal oscillator co09_101021_nt2016sa_e temperature-compensated crystal oscillator with afc function (vc-tcxo) nt2016s series model name nt2016sa for mobile phones, etc. main application supports low power supply voltage. (supports dc +1.8 v0.1 v to 2.9 v0.1 v .) ultra-compact and light with a height, cubic volume, and weight of max. 0.8 mm, 0.0022 cm 3 , and 0.008 g, respectively. with an afc (automatic frequency control) function. low power consumption. a surface-mount crystal oscillator. (refow soldering is possible.) lead-free. meets the requirements for re-fow profling using lead-free solder . features item model nt2016sa nominal frequency (mhz) 16.368, 16.369, 19.2, 26, 27.456 38.4 supply voltage [v cc ] (v) +2.8 load impedance 10 k//10 pf current consumption (ma) max. 1.5 max. 1.7 output voltage min. 0.8 v(p-p) (dc coupling *1) frequency/temperature characteristics max. 2.010 C6 operating temperature range (c) C30 to +85 storage temperature range (c) C40 to +85 frequency/voltage coeffcient max. 0.210 C6 /+2.8 v5 % frequency/load coeffcient max. 0.210 C6 /(10 k//10 pf) 10 % long-term frequency stability max. 1.010 C6 /year frequency control range 9.010 C6 to 15.010 C6 /+1.4 v1 v *2 ? frequency setting conditions 1. frequencies are set at normal temperatures (+252 c). 2. frequencies are set with a printed board that has a ground pattern attached to the underside of an oscillator. ? if you require a product with a different frequency, power supply voltage, frequency control range, etc. to the standard specifcations, please contact us with your enquiries. ? products without the afc (automatic frequency control) function are available. if you require such a product, please contact us. *1. a dc-cut capacitor is not embedded in this crystal oscillator. connect a dc-cut capacitor (1,000 pf) to the line-out terminal of the oscillator. *2. this is a representative specifcation. the specifcations may change according to the frequency that you request. specifcations 2.0 0.1 0.7 0.1 1.2 0.05 #1 #4 #2 #1 #2 #3 1.6 0.1 #4 #3 0.4 0.1 0.4 0.05 0.6 0.1 land pattern (typical) mm #1 #2 #3 #4 v cont gnd output v cc terminal land connections 1.2 0.6 0.6 0.4 0.8 0.8 dimensions frequency (mhz) ordering code 16.368 nt2016sa-16.368m-nsa3456a 16.369 nt2016sa-16.369m-nsa3456a 19.2 nt2016sa-19.2m-nsa3456a 26 nt2016sa-26m-nsa3456b 27.456 nt2016sa-27.456m-nsa3456b 38.4 nt2016sa-38.4m-nsa3456c the above frequencies are ndks standard frequencies. frequencies other than the above are available. feel free to contact our sales representatives. list of ordering codes
|