inches (millimeters) customer drawings available upon request cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com type n straight crimp type plug - 120 second termination - 3 piece 1. identify connector parts. (3 pieces) 2. strip cable to dimensions shown. do not nick the braid or center conductor. slide the crimp sleeve onto the jacket; narrow end first. 3. crimp or solder the contact onto the center conductor using the recommended crimp hex or the minimum amount of solder for a good joint. note: contacts may need to be pre-fit onto the center conductor and soldered through the hole. 4. flare the braid and slide the connector body over the contact and under the braid. then seat the body firmly onto the conta ct; the cable may need to be held in a clamping fixture. arrange the braid uniformly around the crimp stem, then slide the crimp sleeve fo rward to the body and crimp the sleeve using the recommended crimp hex. cable assembly notes: the contact of the cpn-8/110 connector fits rg 8 cable types with a center conductor diameter up to .110". part number cabe type a contact i.d. body i.d. ferrule i.d. CPN-ETN-23 belden 9880 1.619 (41.12) .089 (2.26) .261 (6.63) .420 (10.67) part wire wire jacket hex contact recommended number cable gauge decimal o.d. size crimp hex crimp tool CPN-ETN-23 belden 9880 13 .085 (2.16) .400 (10.16)-.410 (10.44) .404 (10.26) .100 (2.54) 24-7712p
cambridge products, p.o. box 1732, waseca, mn 56093-0832 1-800-243-8814 fax: 507-833-6287 www.cambridgeproducts.com inches (millimeters) customer drawings available upon request electrical characteristics impedance: 50 ohm nominal frequency range: 0-11 ghz working voltage: 500 volts rms at sea level dielectric withstanding voltage: 1500 volts rms at sea level corona level: 375 volts minimum at 70,000 feet contact resistance: outer - 0.2 milliohms maximum center - 2.1 milliohms maximum insulation resistance: 5000 megohms minimum environmental characteristics recommended temperature range: -65 o c to +165 o c moisture resistance: mil-std-202 mechanical characteristics durability: 500 cycles cable retention: 20 lbs., rg-58 c/u cable materials body and coupling nut: brass contact: brass, phosphor bronze or beryllium copper crimp sleeve: brass insulator: teflon or delrin hardware: brass plating: body - nickel crimp sleeve - nickel hardware - nickel contact - gold the n connector employs a large diameter threaded interface for excellent strength and reliability. this commercial quality connector handles high power applications such as antenna feeds for radios and cell sites. termination options include crimp and clamp styles for rugged service. * these are typical and may not apply to all connectors. n connectors specifications
|
