available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model rfp - 10 0 n xxaf features: ? dc ? see chart ? 100 watts ? aluminum nitride ceramic ? non-nichrome resistive element ? welded silver leads ? low vswr ? 100% tested flanged resistors 100 watts, 50 general specifications resistive element thick film substrate aluminum nitride ceramic cover alumina ceramic leads 99% pure silver (.005? thick) electrical specifications attenuation range: 1, 2, 3, 4, 5, 6, 9, 10, 20, 30 db frequency range; dc ? see chart power: 100 watts vswr: 1.25:1 tolerance is 0.010?, unless otherwise specified. designed to mee t of exceed applicable portions of mil-e-5400. operating temper ature is -55oc to 150oc (see chart for derating temperatures). all dimensions in inches. specifications subject to change with out notice. outline drawing 100nxxaf (097) rev b rohs compliant
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 available on tape and reel for pick and place manufacturing. model rfp - 10 0n xxaf specifications: mounting procedure: power derating: suggested mounting procedures: 1. make sure that the devices are mounted on flat surfaces (.001" under the device) to optimize the heat transfer. 2. 3. solder leads in place using an approppriate type solder with a controlled temperature iron. keep lead length as short as possible using a suggested position device on mounting surface and solder in place using an appropriate type solder. stress relief method. 100nxxaf (097) rev b rohs compliant
|