spec no: dsaa6516 rev no: v.7 date: mar/19/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: s.h.chen package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is ? .15(0.006") unless otherwise noted. 3. specifications are subject to change without notice. description the green source color devices are made with ingaalp on gaas substrate light emitting diode. kpa - 3010cgck green 3.0mmx1.0 mm right angle smd chip led lamp features z 3.0mmx1.0mm right angle smt led, 2.0mm thickness. z low power consumption. z wide viewing angle. z ideal for back light and indicator. z package : 2000pcs / reel. z rohs compliant.
spec no: dsaa6516 rev no: v.7 date: mar/19/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: s.h.chen selection guid e note: 1 . 1 /2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 kpa - 3010cgck green (ingaaip) water clear 18 60 120 parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating / storage temperature - 40c to +85c symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v
spec no: dsaa6516 rev no: v.7 date: mar/19/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: s.h.chen green kpa - 3010cgck
spec no: dsaa6516 rev no: v.7 date: mar/19/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: s.h.chen recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpa - 3010cgck remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
