published date : feb 27, 2008 drawing no : sdsa2476 v5 checked : b.l.l iu p.1/4 part number: ZMO55W-1 3.2mmx1.6mm smd chip led lamp www.sunled.com notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.specifications are subject to change without notice. features z 3.2mmx1.6mm smt led, 0.75mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZMO55W-1 orange ingaalp water clear 70 198 610 120 absolute maximum ratings (t a =25c ) mo (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 195 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 operating characteristics (t a =25c ) mo (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.0 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 610 nm wavelength of dominant emission (typ.) (i f =20ma) d 601 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 29 nm capacitance (typ.) (v f =0v, f=1mhz) c 30 pf
published date : feb 27, 2008 drawing no : sdsa2476 v5 checked : b.l.l iu p.2/4 part number: ZMO55W-1 3.2mmx1.6mm smd chip led lamp www.sunled.com ? mo
published date : feb 27, 2008 drawing no : sdsa2476 v5 checked : b.l.l iu p.3/4 part number: ZMO55W-1 3.2mmx1.6mm smd chip led lamp www.sunled.com ? recommended soldering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications . remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 27, 2008 drawing no : sdsa2476 v5 checked : b.l.l iu p.4/4 part number: ZMO55W-1 3.2mmx1.6mm smd chip led lamp www.sunled.com packing & label specifications ZMO55W-1
|