View G057QN01V0_2083729.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g057qn01 v0 ver. 0.3 1/22 g057qn01 v0 preliminary specification final specification module 5.7 inch color tft-lcd model name g057qn01 v0 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2008/08/04 prepared by david hsing 2008/06/20 general display business division / au optronics corporation www..net
g057qn01 v0 ver. 0.3 2/22 g057qn01 v0 contents 1. operating precautions ........................... ................................................... .......4 2. general description............................. ................................................... ..........5 2.1 display characteristics........................ ................................................... ............................5 2.2 optical characteristics ........................ ................................................... ............................6 3. functional block diagram........................ ................................................... .....8 4. absolute maximum ratings ........................ ................................................... ..9 4.1 absolute ratings ............................... ................................................... ..............................9 4.2 absolute ratings of environment ................ ................................................... ....................9 5. electrical characteristics ...................... ................................................... ......10 5.1 tft-lcd driving ................................ ................................................... ...........................10 5.2 backlight unit driving ......................... ................................................... ........................... 11 6. signal characteristic ........................... ................................................... ........12 6.1 pixel format image ............................. ................................................... ..........................12 6.2 scanning direction ............................. ................................................... ...........................12 6.3 the input data format .......................... ................................................... ........................13 6.4 tft- lcd interface signal description.......... ................................................... ................14 6.5 tft- lcd interface timing ...................... ................................................... ......................15 6.6 led backlight unit interface signal description ................................................... ...........16 6.7 power on/off sequence .......................... ................................................... ..................16 7. connector & pin assignment...................... ................................................... 17 7.1 tft- lcd signal (cn1): lcd connector ........... ................................................... ...........17 7.2 led backlight unit (cn2): backlight connector.. ................................................... ..........17 7.3 pin 1 definition of cn1 and cn2 ................ ................................................... ..................18 8. reliability test criteria ....................... ................................................... .........18 9. mechanical characteristics...................... ................................................... ...20 10. label and packaging ............................ ................................................... .....21 10.1 shipping label (on the rear side of tft-lcd di splay) ............................................. ......21 10.2 carton package ................................ ................................................... ..........................21 11 safety.......................................... ................................................... .................22 11.1 keen edge requirements ........................ ................................................... ...................22 11.2 materials ..................................... ................................................... .................................22 11.3 capacitors .................................... ................................................... ...............................22 11.4 national test lab requirement ................. ................................................... ..................22 www..net
g057qn01 v0 ver. 0.3 3/22 g057qn01 v0 record of revision version and date page old description new description remark 0.1, oct. 04, 2007 all first edition preliminary specifications 5 no description add ?the most suitable view angle:12 o?clock? section 2.1 11 no description add ?v f typical specification? add ?note 1? section 5.2.1 16 pin 3: hsync pin 4: vsync pin 3: nc pin 4: nc section 7.1 0.2, nov.20, 2007 19 2d drawing update add? suggested applying torque: 0.15~0.2 nm? section 9 5 typical power consumption 2.19w (lcd:0.69w/led blu: 1.5w) typical power consumption 1.57w (lcd:0.37w/led blu: 1.2w) section 2.1 6 revise optical characteristics section 2.2 9 absolute ratings i f : max.=30ma v r : max.= no definition i r : max.= no definition absolute ratings i f : max.=20ma v r : max.=5v i r : max.=10 0a www..net
g057qn01 v0 ver. 0.3 4/22 g057qn01 v0 1. operating precautions 1) display area (polarizer) of tft-lcd module is ea sily to be damaged, please be cautious and not to scratch it. 2) be sure to power off your machine before connect ing or disconnecting your signal cable to tft-lcd module. 3) wipe off water drop on display area immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) display area (glass) of tft-lcd module may be br oken or cracked if bump module against hard object. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the tft-lcd module assemb ly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if tft-lcd module has to be put back int o the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge softly. otherwis e the tft-lcd module may be damaged. 10) when inserting or removing of your signal cable to tft-lcd module, be sure not to apply abnormal force (rotate, tilt?etc.) to the connector of the tft-lcd module. 11) tft-lcd module is not allowed to be twisted & b ent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 13) severe temperature condition may result in diff erent luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance drama tically. 15) the data on this specification sheet is applica ble when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. it?s recommended to use screen saver or moving content periodically if fixed patte rn is displayed on the screen. www..net
g057qn01 v0 ver. 0.3 5/22 g057qn01 v0 2. general description g057qn01 v0 is designed for industrial display appl ications with qvga (320 x rgb x 240) resolution and 262k colors (rgb 6-bits). it is comp osed of a tft-lcd panel, driver ics, control and power supply circuits board and backlight unit. g05 7qn01 v0 offers cmos interface for display signal input. led driving board for backlight unit is not included. 2.1 display characteristics the following items are g057qn01 v0 characteristics summary at 25 www..net
g057qn01 v0 ver. 0.3 6/22 g057qn01 v0 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 20 msec falling - 10 15 response time msec rising + falling - 25 35 note 5 degree degree horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle degree degree vertical (upper) cr = 10 (lower) 60 60 70 70 - - note 6 white x 0.263 0.313 0.363 white y 0.279 0.329 0.379 red x 0.510 0.560 0.610 red y 0.280 0.330 0.380 green x 0.275 0.325 0.375 green y 0.535 0.585 0.635 blue x 0.100 0.150 0.200 color / chromaticity coordinates (cie 1931) blue y 0.055 0.105 0.155 color gamut % - 50 - note 1: measurement method equipment pattern generator, power supply, digi tal voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net
g057qn01 v0 ver. 0.3 7/22 g057qn01 v0 note 2: definition of 5 points position (display ac tive area: 115.2mm(w) x 86.4mm(h)) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 3: the luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition. note 4: definition of contrast ratio (cr): note 5: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), re spectively. the response time interval definition i s between 10% and 90% of amplitude. please refer to the figure as below. maximum brightness of five points 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net
g057qn01 v0 ver. 0.3 8/22 g057qn01 v0 note 6: definition of viewing angle viewing angle is the measurement of contrast ratio R l , r ) and 180 vertical ( h , l ) range are illustrated as following figure. 3. functional block diagram the following diagram shows the functional block of the g057qn01 v0 color tft/lcd module. www..net
g057qn01 v0 ver. 0.3 9/22 g057qn01 v0 4. absolute maximum ratings 4.1 absolute ratings item symbol min max unit remark logic/lcd drive voltage vdd -0.3 +3.6 volt led forward current i f 0 20 ma led reverse voltage v r - 5 volt led reverse current i r - 100 www..net
g057qn01 v0 ver. 0.3 10/22 g057qn01 v0 5. electrical characteristics 5.1 tft-lcd driving 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 volt idd vdd current - 115 130 ma all black pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 1.5 a note 1 pdd vdd power - 0.37 0.43 watt all black pattern (vdd=3.3v, at 60hz) vddrp allowable logic/lcd drive ripple voltage - - 100 mvp-p all black pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 0.5ms vdd www..net
g057qn01 v0 ver. 0.3 11/22 g057qn01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. parameter symbol min. typ. max. unit remarks high vih 0.7vdd - vdd volt logic input voltage for display signals low vil 0 - 0.3vdd volt high vih 0.7vdd - vdd volt input voltage for rl/ud low vil 0 - 0.3vdd volt 5.2 backlight unit driving 5.2.1 parameter guideline for led following characteristics are measured under stable condition using a led driving board at 25 (ro www..net
g057qn01 v0 ver. 0.3 12/22 g057qn01 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of sc an. note 1: tft-lcd interface signal description is sho wn in section 6.4. www..net
g057qn01 v0 ver. 0.3 13/22 g057qn01 v0 6.3 the input data format this product displays 262,144 colors in terms of th e 64 grey levels on rgb respectively. the following table demonstrates the display of input data. www..net
g057qn01 v0 ver. 0.3 14/22 g057qn01 v0 6.4 tft- lcd interface signal description note 1: ?low? stands for 0v. ?high? stands for 3.3v . ?nc? stands for ?no connection?. www..net
g057qn01 v0 ver. 0.3 15/22 g057qn01 v0 6.5 tft- lcd interface timing 6.5.1 timing characteristics de mode only signal symbol min. typ. max. unit remark clock frequency (dotclk) 1/ t clock 6.2 6.4 12.1 mhz note1 period t h 406 408 560 active t hd 320 horizontal section blanking t hb 86 88 240 t clock note1 period t v 254 263 360 active t vd 240 vertical section blanking t vb 14 23 120 t line note1 note 1: recommended frame rate is 60 hz. 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
g057qn01 v0 ver. 0.3 16/22 g057qn01 v0 6.6 led backlight unit interface signal description pin # symbol pin description 1 an1 channel 1 led anode 2 an2 channel 2 led anode 3 an3 channel 3 led anode 4 ca1 channel 1 led cathode 5 ca2 channel 2 led cathode 6 ca3 channel 3 led cathode 6.7 power on/off sequence vdd power, lcd interface signals and backlight on/o ff sequence are shown in the following chart. signa ls from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 0 - 50 ms t4 0 - 10 ms t5 200 - - ms t6 200 - - ms t7 500 - - ms on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. www..net
g057qn01 v0 ver. 0.3 17/22 g057qn01 v0 7. connector & pin assignment 7.1 tft- lcd signal (cn1): lcd connector manufacturer starconn or compatible mating connecter model number 089h33-000100-g2-r or compatible pin# symbol pin# symbol pin# symbol 1 gnd 12 gnd 23 b3 2 dotclk 13 g0 24 b4 3 nc 14 g1 25 b5 4 nc 15 g2 26 gnd 5 gnd 16 g3 27 de 6 r0 17 g4 28 vdd 7 r1 18 g5 29 vdd 8 r2 19 gnd 30 r/l 9 r3 20 b0 31 u/d 10 r4 21 b1 32 nc 11 r5 22 b2 33 gnd 7.2 led backlight unit (cn2): backlight connector manufacturer stm or compatible connector model number p24021p6 or compatible mating connecter model number sm06b-shls-tf or compatible pin # symbol cable color pin # symbol cable color 1 an1 red 4 ca1 white 2 an2 red 5 ca2 blue 3 an3 red 6 ca3 black www..net
g057qn01 v0 ver. 0.3 18/22 g057qn01 v0 7.3 pin 1 definition of cn1 and cn2 8. reliability test criteria items required condition remark temperature humidity bias 40 /90%,300hr ) 1sec, 8 points, 25 times/point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/point note 1,2 attitude test operating: 14,000 ft, ramp: 2000 ft/min, 8hrs non-operating: 40,000 ft, ramp: 2000 ft/min, 24hrs note 2 note1: according to en61000-4-2 esd class b criteri a, some performance degradation is allowed. tft-lcd module is self-recoverable, no data lost and no hardware f ailures after test. www..net
g057qn01 v0 ver. 0.3 19/22 g057qn01 v0 note2: water condensation is not allowed for each test it ems. each test is done by new tft-lcd module. don?t use the same tft-lcd module repeatedly for reliability test. the reliability test is performed only to examine the tft-lcd module capability. to inspect tft-lcd module after reliability test, please store it at room temperature and room humidi ty for 24 hours at least in advance. www..net
g057qn01 v0 ver. 0.3 20/22 g057qn01 v0 9. mechanical characteristics www..net
g057qn01 v0 ver. 0.3 21/22 g057qn01 v0 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max. capacity: 60 pieces tft-lcd module per carton max. weight: 12.65 kg per carton outside dimension of carton: 520(l)mm* 340(w)mm* 25 0(h)mm www..net
g057qn01 v0 ver. 0.3 22/22 g057qn01 v0 11 safety 11.1 keen edge requirements there will be no keen edges or corners on the displ ay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the tft-lcd module. if toxic materials are us ed, they will be reviewed and approved by the responsible auo tox icologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the tft-lcd module will complete the flammability rating except ion approval process. the printed circuit board will be made from materia l rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the tft-lcd module, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the tft-lcd module will satisfy all requirements fo r compliance to ul 60950 (u.s.a. information techno logy equipment). www..net

▲Up To Search▲

Price & Availability of G057QN01V0

Part #	Manufacturer	Description	Price	BuyNow Qty.
G057QN01V0	MFG UPON REQUEST			5387

	To Download G057QN01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .