optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 05/10 page 1 of 4 product photo here part number part number material emitted color intensity typ. (mcd) lens color OVM4Btx OVM4Btxv ingan blue 2260 clear glass ovm4gtx ovm4gtxv ingan green 6520 clear glass ovm4rtx ovm4rtxv alingap red 3300 clear glass ovm4ytx ovm4ytxv alingap yellow 2010 clear glass hi-reliability visible led lamp (to46) ovm4x, ovm4xtx, ovm4xtxv ? hermetically sealed to-46 package ? choice of blue, green, red or yellow ? high-brightness with well-defined spatial radiation patterns ? esd protection built in each ovm4x , ovm4xtx and ovm4xtxv device is a high-reliability, high-sens itivity visible led that is mounted in a hermetically sealed to-46 package. ?hi-reliability? visible leds function in the abnormally se vere levels of mechanical, environmental and electrical stress that are typical of militar y and harsh industrial applications. ovm4xtx and ovm4xtxv devices are processed to optek?s 100% screening and qci program-patterned after mil-prf-19500. group a and b are performed on ever y lot. group c is performed every six months. applications ? automotive exterior and interior lighting ? architectural lighting ? electronic signs and signals rohs do not look directly at led with unshielded eyes or damage to retina may occur. anode (brazed) cathode (isolated) dimensions are in inches [ mm] pin 1 cathode pin 2 anode pin 2 pin 1
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 05/10 page 2 of 4 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. absolute maximum ratings t a = 25 o c unless otherwise noted electrical characteristics t a = 25 o c unless otherwise noted notes: 1. all ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. to designate luminous intensity ranks, please contact optek. 3. pb content <1000 ppm. storage temperature range -65 c to +150 c operating temperature range -55 c to +100 c reverse voltage 5 v continuous forward current 2 100 ma peak forward current (10% duty cycle, 1 khz) 1.6 a power dissipation 370 mw 115 c led junction temperature lead soldering temperature (3mm from the case) 1 260 c current linearity vs. ambient temperature -0.2 ma/ c symbol parameter min typ max units conditions i v luminous intensity blue ---- 2260 ---- mcd i f = 20 ma green ---- 6520 ---- red ---- 3300 ---- yellow ---- 2010 ---- v f forward voltage blue ---- 2.60 2.95 v i f = 20 ma green ---- 2.60 2.95 red ---- 1.80 2.15 yellow ---- 1.80 2.15 p peak wavelength blue ---- 463 ---- nm i f = 20 ma green ---- 530 ---- red ---- 630 ---- yellow ---- 591 ---- d dominant wavelength blue 460 465 470 nm i f = 20 ma green 520 530 540 red 619 624 629 yellow 584 589 594 ? spectral half width blue ---- 22 ---- nm i f = 20 ma green ---- 35 ---- red ---- 15 ---- yellow ---- 18 ---- 2 ? 50% power angle ---- 18 ---- deg i f = 20 ma hi-reliability visible led lamp ovm4x, ovm4xtx, ovm4xtxv notes: 1. solder time less than 5 seconds at temperature extreme. 2. design of heat dissipat ion should be considered.
optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 05/10 page 3 of 4 typical electro-optical characteristics curves hi-reliability visible led lamp ovm4x, ovm4xtx, ovm4xtxv 1.0 0.8 0.6 0.4 0.2 0.0 780 380 430 480 530 580 630 680 730 wavelength (nm) normalized spectral intensity input current = 100 ma, t j = 25 c wavelength characteristics red yellow green blue 0 20 40 60 80 100 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6 vf (v) if (ma) red yellow green blue forward voltage vs forward current forward voltage vs temperature 1. 5 2.0 2.5 3.0 3.5 4.0 -100 -50 0 50 100 150 200 temperat ure ( deg. c red yellow green blue vf (v) 0.1 1. 0 10 . 0 -75 -50 -25 0 25 50 75 100 125 150 deg c OVM4B ovm4r ovm4y ovm4g relative intensity vs temperature t a = 25c i f = 20 ma spatial intensity distribution red yellow green blue 0 500 1000 1500 2000 2500 3000 3500 4000 0 20 406080100120 intensity vs forward current forward current (ma) intensity (mcd) t j = 25 c
optek technology inc. ? 1645 wallace drive, carrollton, texas 75006 phone: (972) 323-2200 or (800) 341-4747 fax: (972) 3 23-2396 sensors@optekinc .com www. optekinc.com issue a.4 05/10 page 4 of 4 optek reserves the right to make changes at any time in or der to improve design and to s upply the best product possible. hi-reliability visible led lamp ovm4x, ovm4xtx, ovm4xtxv 14.76 13.0 100x 0.250 100x 1.320 100x 0.190 4x 0.500 [12.70] 100x 0.250 pocket detail shipping information: optek uv leds are shipped in either of the below not ed conductive trays made for esd sensitive devices. each tray contains up to 100 pieces and is then sealed in a plastic esd bag. tray dimensions are in inches (mm).
|
