![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DCR2950W65 www..com Phase Control Thyristor Preliminary Information DS5871-1.0 September2005 (LN24230) FEATURES * * Double Side Cooling High Surge Capability KEY PARAMETERS VDRM IT(AV) ITSM dV/dt* dI/dt 6500V 2945A 38500A 1500V/s 300A/s APPLICATIONS * * * High Power Drives High Voltage Power Supplies Static Switches * Higher dV/dt selections available VOLTAGE RATINGS Part and Ordering Number Repetitive Peak Voltages VDRM and VRRM V 6500 6000 5500 5000 Conditions DCR2950W65 DCR2950W60 DCR2950W55 DCR2950W50 Tvj = -40 C to 125 C, IDRM = IRRM = 300mA, VDRM, VRRM tp = 10ms, VDSM & VRSM = VDRM & VRRM + 100V respectively Lower voltage grades available. Outline type code: W (See Package Details for further information) ORDERING INFORMATION When ordering, select the required part number shown in the Voltage Ratings selection table. For example: DCR2950W65 Note: Please use the complete part number when ordering and quote this number in any future correspondence relating to your order. Fig. 1 Package outline 1/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com CURRENT RATINGS Tcase = 60 C unless stated otherwise Symbol Double Side Cooled IT(AV) IT(RMS) IT Parameter Test Conditions Max. Units Mean on-state current RMS value Continuous (direct) on-state current Half wave resistive load - 2945 4629 4430 A A A SURGE RATINGS Symbol ITSM It 2 Parameter Surge (non-repetitive) on-state current I t for fusing 2 Test Conditions 10ms half sine, Tcase = 125 C VR = 0 Max. 38.85 7.55 Units kA MA s 2 THERMAL AND MECHANICAL RATINGS Symbol Rth(j-c) Parameter Thermal resistance - junction to case Test Conditions Double side cooled Single side cooled DC Anode DC Cathode DC Rth(c-h) Thermal resistance - case to heatsink Clamping force 76.0kN (with mounting compound) Tvj Virtual junction temperature On-state (conducting) Reverse (blocking) Tstg Fm Storage temperature range Clamping force Double side Single side Min. -55 68.0 Max. 0.00631 0.01115 0.01453 0.0014 0.0028 135 125 125 84.0 Units C/W C/W C/W C/W C/W C C C kN 2/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com DYNAMIC CHARACTERISTICS Symbol IRRM/IDRM dV/dt dI/dt Parameter Peak reverse and off-state current Max. linear rate of rise of off-state voltage Rate of rise of on-state current Test Conditions At VRRM/VDRM, Tcase = 125 C To 67% VDRM, Tj = 125 C, gate open From 67% VDRM to 2x IT(AV) Gate source 30V, 10, tr < 0.5s, Tj = 125 C Repetitive 50Hz Non-repetitive Min. - Max. 300 1500 150 300 Units mA V/s A/s A/s VT(TO) Threshold voltage - Low level Threshold voltage - High level 500 to 2400A at Tcase = 125 C 2400 to 72000A at Tcase = 125 C 500A to 2400A at Tcase = 125 C 2400A to 72000A at Tcase = 125 C VD = 67% VDRM, gate source 30V, 10 tr = 0.5s, Tj = 25 C TBD 0.94 1.13 0.343 0.264 TBD V V m m s rT On-state slope resistance - Low level On-state slope resistance - High level tgd Delay time tq Turn-off time Tj = 125 C, V R = 200V, dI/dt = 1A/s, dVDR/dt = 20V/s linear - 1200 s QS IL IH Stored charge Latching current Holding current IT = 2000A, Tj = 125 C, dI/dt - 1A/s, Tj = 25 C, V D = 5V Tj = 25 C, R G-K = , ITM = 500A, IT = 5A 2800 TBD TBD 6400 TBD TBD C mA mA 3/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com GATE TRIGGER CHARACTERISTICS AND RATINGS Symbol VGT VGD IGT IGD Parameter Gate trigger voltage Gate non-trigger voltage Gate trigger current Gate non-trigger current Test Conditions VDRM = 5V, Tcase = 25 C At VDRM, Tcase = 125 C VDRM = 5V, Tcase = 25 C VDRM = 5V, Tcase = 25 C Max. 1.5 TBD 250 TBD Units V V mA mA CURVES 7000 Instantaneous on-state current I T - (A) 6000 5000 4000 3000 2000 1000 0 0.5 1.5 2.5 3.5 min 125 C max 125 C min 25 C max 25 C Instantaneous on-state voltage VT - (V) Fig.2 Maximum & minimum on-state characteristics VTM EQUATION VTM = A + Bln (IT) + C.IT+D.IT Where A = 0.914146 B = -0.3808 C = 0.00016 D = 0.015311 these values are valid for Tj = 125 C for I T 500A to 7200A 4/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com 20 18 130 120 Maximum case temperature, T case ( oC ) 110 100 90 80 70 60 50 40 30 20 10 0 0 1000 2000 3000 4000 5000 180 120 90 60 30 Mean power dissipation - (kW) 16 14 12 10 8 6 4 2 0 0 1000 2000 3000 4000 5000 180 120 90 60 30 Mean on-state current, IT(AV) - (A) Mean on-state current, IT(AV) - (A) Fig.3 On-state power dissipation - sine wave Fig.4 Maximum permissible case temperature, double side cooled - sine wave 20 180 120 90 60 30 130 Maximum heatsink temperature, T Heatsink - ( oC ) 120 110 100 90 80 70 60 50 40 30 20 10 0 0 1000 2000 3000 4000 18 Mean power dissipation - (kW) 16 14 12 10 8 6 4 2 d.c. 180 120 90 60 30 Mean on-state current, IT(AV) - (A) 0 0 1000 2000 3000 4000 5000 6000 7000 Mean on-state current, IT(AV) - (A) Fig.5 Maximum permissible heatsink temperature, double side cooled - sine wave Fig.6 On-state power dissipation - rectangular wave 5/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com 130 Maximum permissible case temperature , Tcase - ( C) 120 110 100 90 80 70 60 50 40 30 20 10 0 0 1000 2000 3000 4000 5000 6000 7000 Maximum heatsik temperature Theatsink - (oC) d.c. 180 120 90 60 30 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0 1000 2000 3000 4000 5000 6000 d.c. 180 120 90 60 30 Mean on-state current, IT(AV) - (A) Mean on-state current, IT(AV) - (A) Fig.7 Maximum permissible case temperature, double side cooled - rectangular wave 16 Double Side Cooling 14 12 Anode Side Cooling Cathode Sided Cooling Fig.8 Maximum permissible heatsink temperature, double side cooled - rectangular wave Double side cooled Anode side cooled Cathode side cooled Ri ( C/kW) Ti (s) Ri ( C/kW) Ti (s) Ri ( C/kW) Ti (s) Zth = [Ri x ( 1-exp. (t/ti))] [1] 1 0.8816 0.0106818 1.5197 0.0170581 1.4106 0.0158344 2 1.2993 0.058404 3.2398 0.2424644 2.4667 0.1786951 3 2.8048 0.3584979 5.7622 6.013 6.7451 3.6201 4 1.3305 1.1285 0.6312 15.364 3.9054 6.196 Thermal Impedance, Zth(j-c) - ( C/kW) 10 8 Rth(j-c) Conduction 6 4 2 0 0.001 0.01 0.1 1 10 100 Tables show the increments of thermal resistance R th(j-c) when the device operates at conduction angles other than d.c. Double side cooling Zth (z) 180 120 90 60 30 15 sine. 1.00 1.16 1.33 1.48 1.61 1.66 rect. 0.67 0.97 1.13 1.31 1.51 1.61 180 120 90 60 30 15 Anode Side Cooling Zth (z) sine. 0.94 1.08 1.23 1.37 1.47 1.52 rect. 0.64 0.91 1.06 1.22 1.38 1.47 Cathode Sided Cooling Zth (z) 180 120 90 60 30 15 sine. 0.95 1.09 1.25 1.38 1.49 1.54 rect. 0.65 0.92 1.07 1.23 1.40 1.49 Time ( s ) Fig.9 Maximum (limit) transient thermal impedance - junction to case ( C/kW) 6/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com 100 40 Conditions: Tcase = 125 C VR =0 Pulse width = 10ms 90 80 70 60 50 40 30 Conditions: Tcase= 125 C VR = 0 half-sine wave 20 Surge current, ITSM - (kA) 35 Surge current, ITSM- (kA) 15 25 10 I2t 5 20 20 15 10 10 1 10 100 0 1 10 0 100 Number of cycles Pulse width, tP - (ms) Fig.10 Multi-cycle surge current Fig.11 Single-cycle surge current I t (MA s) 7/9 30 www.dynexsemi.com 2 2 ITSM DCR2950W65 SEMICONDUCTOR PACKAGE DETAILS www..com For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise. DO NOT SCALE. Device DCR1594SW28 DCR1595SW42 DCR1596SW52 DCR5450W22 DCR4910W28 DCR4100W42 DCR3640W52 DCR2950W65 DCR2450W85 Maximum Minimum Thickness Thickness (mm) (mm) 27.34 26.79 27.57 27.02 27.69 27.14 27.265 26.715 27.34 26.79 27.57 27.02 27.69 27.14 27.95 27.4 28.31 27.76 Clamping force: 76kN 10% Lead length: 420mm Lead terminal connector: M4 ring Package outline type code: W Fig.15 Package outline 8/9 www.dynexsemi.com DCR2950W65 SEMICONDUCTOR www..com POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group offers high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete Solution (PACs). HEATSINKS The Power Assembly group has its own proprietary range of extruded aluminium heatsinks which have been designed to optimise the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or Customer Services. Stresses above those listed in this data sheet may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln Lincolnshire, LN6 3LF. United Kingdom. Tel: +44(0)1522 500500 Fax: +44(0)1522 500550 CUSTOMER SERVICE Tel: +44(0)1522 502753 / 502901. Fax: +44(0)1522 500020 Dynex Semiconductor 2003 TECHNICAL DOCUMENTATION - NOT FOR RESALE. PRODUCED IN UNITED KINGDOM. This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. 9/9 www.dynexsemi.com |
Price & Availability of DCR2950W65
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |