 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENA0457 6LP04MH P-Channel Silicon MOSFET 6LP04MH Features * General-Purpose Switching Device Applications 1.5V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings -60 10 --100 --400 0.6 150 --55 to +150 Unit V V mA mA W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 RDS(on)3 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=-1mA, VGS=0V VDS=--60V, VGS=0V VGS=8V, VDS=0V VDS=--10V, ID=--100A VDS=--10V, ID=--50mA ID=-50mA, VGS=-4V ID=-30mA, VGS=-2.5V ID=-10mA, VGS=-1.5V VDS=--20V, f=1MHz VDS=--20V, f=1MHz VDS=--20V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --60 --1 10 --0.4 130 220 6.5 7.4 10 15 3.5 1.0 75 116 665 270 8.5 11 20 --1.4 typ max Unit V A A V mS pF pF pF ns ns ns ns Marking : QA Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 70306PE MS IM TB-00002387 No. A0457-1/4 6LP04MH Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--30V, VGS=-4V, ID=--100mA VDS=--30V, VGS=-4V, ID=--100mA VDS=--30V, VGS=-4V, ID=--100mA IS=--100mA, VGS=0V Ratings min typ 0.58 0.14 0.03 --0.91 --1.5 max Unit nC nC nC V Package Dimensions unit : mm (typ) 7019A-003 2.0 0.25 0.15 Switching Time Test Circuit 0V --4V VIN VIN VDD= --30V ID= --50mA RL=600 3 2.1 1.6 0 to 0.02 PW=10s D.C.1% D G VOUT 1 0.25 0.65 2 0.3 P.G 50 R=5k 6LP04MH S 0.85 0.07 1 : Gate 2 : Source 3 : Drain SANYO : MCPH3 --100 --90 --80 ID -- VDS --6 . --150 ID -- VGS VDS= --10V 5V --3 . --2 5V Drain Current, ID -- mA Drain Current, ID -- mA --4 . .0V 0V --60 --50 --40 --30 --20 --10 0 0 --0.1 --0.2 --8 . 0V -4. 0V --70 --1.5 V GS= V --100 --50 5C 25C 0 --0.5 0 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.0 --1.5 --2.0 --2.5 IT11253 Drain-to-Source Voltage, VDS -- V 30 IT11252 20 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V RDS(on) -- Ta Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- 25 Static Drain-to-Source On-State Resistance, RDS(on) -- 15 20 --30mA 15 10 --50mA 10 5 5 ID= --10mA .5V = --1 , VGS A --10m .5V I D= = --2 VGS mA, --30 I D= .0V = --4 , VGS A --50m I D= 0 0 --2 --4 --6 --8 --10 IT11254 0 --60 --40 --20 0 20 Ta= 7 40 --25 C 60 80 100 120 140 160 Gate-to-Source Voltage, VGS -- V Ambient Temperature, Ta -- C IT11255 No. A0457-2/4 6LP04MH 7 yfs -- ID VDS= --10V Forward Transfer Admittance, yfs -- mS 5 3 2 --100 7 5 3 IS -- VSD VGS=0V Source Current, IS -- A 2 --10 7 5 3 100 7 5 3 2 = Ta --2 C 5 C 75 C 25 --1.0 7 5 3 2 10 --1.0 2 3 5 7 --10 2 3 5 7 --100 2 3 5 --0.1 --0.2 --0.4 25C 2 Ta=7 5C --0.6 --25C --0.8 --1.0 --1.2 IT11257 Drain Current, ID -- mA 3 2 IT11256 3 2 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Ciss Diode Forward Voltage, VSD -- V VDD= --30V VGS= --4V Ciss, Coss, Crss -- pF td(off) Switching Time, SW Time -- ns 1000 7 5 10 7 5 3 2 tf 3 2 Coss 100 7 5 --0.001 2 3 5 tr td(on) 7 --0.01 2 3 5 Crss 1.0 7 5 Drain Current, ID -- A --4.0 --3.5 --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 0 0 0.1 0.2 0.3 0.4 0.5 --0.1 IT11258 7 5 3 2 7 0 --5 --10 --15 --20 --25 --30 IT11259 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS= --30V ID= --100mA Drain Current, ID -- A IDP= --400mA --0.1 7 5 3 2 ID= --100mA DC op er ati 10s 1m 10 s m s 10 0m s on (T a= 25 C ) --0.01 7 5 3 2 Operation in this area is limited by RDS(on). Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 2 3 0.6 IT11260 --0.001 --0.1 Total Gate Charge, Qg -- nC 0.7 PD -- Ta Drain-to-Source Voltage, VDS -- V 5 7 --100 IT11261 Allowable Power Dissipation, PD -- W 0.6 M 0.5 ou nt ed on 0.4 ac er am ic 0.3 bo ar d (9 00 m 0.2 m2 ! 0. 8m 0.1 0 0 20 40 60 80 100 120 m ) 160 140 Ambient Temperature, Ta -- C IT11262 No. A0457-3/4 6LP04MH Note on usage : Since the 6LP04MH is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2006. Specifications and information herein are subject to change without notice. PS No. A0457-4/4 |
Price & Availability of 6LP04MH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |