View ZCS1-70_4746570.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZCS1-70/71
HIGH CURRENT SOLENOIDS
FEATURES
* High current handling capability * Isolated or grounded coils * Enclosed in dust-resistant case
COIL PARAMETERS ORDERING INFORMATION
ZCS1-70 1
A 2
1 3
DC6V 4
C 5
2 6
1. Series Number: ZCS1-70, ZCS1-71 2. Contact Form: A = 1A (SPNO); C = 1C (SPDT) 3. Coil Termination: 1. = Isolated coil, Ag contacts 2. = Coil grounded to case, all Ag contacts 3. = Isolated coil, Cu NO & Ag NC contacts 4. = Coil grounded to case, Cu NO & Ag NC contacts 5. = Coil common to NO, Cu NO & Ag NC contacts 4. Coil Voltage: DC6V; DC12V; DC18V; DC24V; DC36V 5. Coil Type: C = Continuous I = Intermittent 6. Hardware: 2. Hardware loosely assembled 5. Hardware bulk packed 7. No Hardware included
* Termination; #10-32 UNF - 2A thread * Connections: 1. Coil isolated (two terminals) 2. One coil lead grounded to case (one terminal) 3. One coil lead common to NO terminal marked "BAT" (one terminal) * Coil data:
Part Coil Voltage (VDC) Rated 6 12 18 24 36 6 12 18 24 36 Max 6.6 13.2 19.8 26.4 39.5 6.6 13.2 19.8 26.4 39.8 Coil Resistance (ohm) Int. 1.5 6.2 20.3 23.9 60.4 1.4 4.9 13.5 20.1 57.1 Cont. 4.0 16.0 37.4 60.4 114.0 3.5 13.5 38.0 57.1 131.0 Must-Operate Voltage (VDC) Int. 4.02 8.04 12.06 16.08 24.12 4.02 8.04 12.06 16.08 24.12 Cont. 4.5 9.0 13.5 18.0 27.0 4.5 9.0 13.5 18.0 27.0 Coil Power (W) Int. Cont.
ZCS1-70
23
9
ZCS1-71
25
10
CONTACT DATA * Contact Arrangement: 1A (SPNO), 1C (SPDT) * Contact Material: 1A- Cu or Ag; 1C- Cu and Ag, or all Ag * UL Pending
Normally Open Contact Cont. (A) ZCS1-70 6 12 18, 24 & 36 6 12 18, 24 & 36 80 80 50 80 80 50 In-rush (A) 800 400 200 1000 500 250 Normally Closed Contact Cont. (A) 60 60 30 60 60 30 In-rush (A) 100 60 30 100 60 30
Part
Coil Voltage (VDC)
ZCS1-71
5/19/06
ZCS1-70/71
GENERAL DATA
Dielelectric Strength Temperature Range Mechanical Life (no load) Electrical Life (rated load) Mounting position (Recommended) 500 Volts -40F~122F (-40C~50C) 250,000 cycles 100,000 cycles Plunger vertical with cap down Continuous; Intermittent: Duty Cycle
At 10 sec "on" maximum requires minimum of 60 sec "off". With a 60 sec "on" max there is a minimum of 6 min "off."
Hardward Torque specification Weight
44-55 in-lbs (Contact terminal); 12-18 in-lbs (Coil terminal) 398g (ZCS1-70); 483g (ZCS1-71)
MECHANICAL DATA SPNO - Isolated Coil
.281 x 390 SLOT 5/16-UNF-2A .485(USABLE) LENGTH
COIL CONNECTION (ISOLATED) W3.480 2.109
10-32UNF-2A.470
0.48 0.900 (ZCS1-70) 1.196 (ZCS1-71) .569 1.082
L
2.429 (ZCS1-70) 2.725 (ZCS1-71)
H 2.4
CIRCUIT DIAGRAM
APPLICATION NOTES:
1.) Not all number combinations are available. Please contact your Sales Representative for available part numbers. 2.) Solenoid applied in battery charging circuits should be protected from higher than rated voltage during charging. The service life may be affected by this condition and the solenoid may or may not operate the circuit as intended. 3.) Circuits should be designed to provide safe operation should the solenoid fail in either the open or closed position. 4.) A back-up wrench must be used to hold the bottom nut stationary during installation.
5/19/06
ZCS1-70/71
SPDT-Isolated Coil
.281 x .390 Slot 5/16-UNF-2A .485(USABLE) LENGTH
3.480
2.1
COIL CONNECTION
10-32UNF-2A.470 0.900
(ZCS1-70)
0.4 .56 1.0
1.196
(ZCS1-71)
3.313(ZCS1-70) 3.609 (ZCS1-71) CIRCUIT
2.
Coil Common to Load
.281x.390 Slot COMMON
5/16-UNF-2A .485(USABLE) LENGTH
W3.4
2.1
COIL CONNECTION
10-32UNF-2A.470
0.900
(ZCS1-70)
0.4 1.0
BA
.56
1.196
(ZCS1-71)
2.429 (ZCS1-70) 2.725 (ZCS1-71) CIRCUIT
2.
Coil Grounded to Case
.281 x .390 Slot 5/16-UNF-2A .485(USABLE) LENGTH
10-32UNF-2A.470 COIL CONNECTION
3.480
2.1
0.900
(ZCS1-70)
0.4 .56 1.0
1.196
(ZCS1-71)
2.429 (ZCS1-70) 2.725 (ZCS1-71) CIRCUIT
2.
5/19/06

▲Up To Search▲

Price & Availability of ZCS1-70

	To Download ZCS1-70 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .