|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High-frequency Amplifier Transistor (25V, 50mA, 300MHz) 2SC5659 / 2SC4618 / 2SC4098 / 2SC2413K / 2SC2058S Features 1) Low collector capacitance. (Cob : Typ. 1.3pF) 2) Low rbb, high gain, and excellent noise characteristics. Dimensions (Unit : mm) 2SC5659 0.2 1.2 0.8 (2) (3) (1) 0.2 1.2 0.32 0.4 0.4 0.5 0.22 Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation 2SC5659, 2SC4618 2SC4098, 2SC2413K 2SC2058S Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 40 25 5 50 0.15 0.2 0.25 0.15 0.8 Unit V V V mA W C C ROHM : VMT3 0.15Max. (1) Base (2) Emitter (3) Collector (1) (2) 0.2 0.5 0.5 2SC4618 0.3 (3) 0.13 0to0.1 1.0 0.8 1.6 0.55 0.7 Junction temperature Storage temperature 150 -55 to +150 0.2 1.6 0.1Min. Packaging specifications and hFE Type Package hFE Marking Code Basic ordering unit (pieces) 2SC5659 VMT3 P A T2L 2SC4618 EMT3 P A TL 2SC4098 UMT3 P A T106 3000 2SC2413K 2SC2058S SMT3 P A T146 3000 SPT P - TP 5000 (1) 2SC4098 0.3 (3) 0to0.1 ROHM : EMT3 EIAJ : SC-75A (1) Emitter (2) Base (3) Collector 0.65 0.65 0.7 0.15 0.2 1.25 2.1 (2) Denotes hFE ROHM : UMT3 EIAJ : SC-70 0.1to0.4 0to0.1 8000 3000 0.9 1.3 2.0 Each lead has same dimensions (1) Emitter (2) Base (3) Collector 2SC2413K 0.4 (3) (1) 1.6 2.8 0.15 0.3to0.6 ROHM : SMT3 EIAJ : SC-59 0to0.1 0.8 1.1 0.95 0.95 1.9 2.9 (2) Each lead has same dimensions (1) Emitter (2) Base (3) Collector 2SC5058S 3 4 2 (15Min.) 3Min. 0.45 2.5 5 0.5 0.45 ROHM : SPT EIAJ : SC-72 (1) (2) (3) Taping specifications (1) Emitter (2) Collector (3) Base Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 40 25 5 - - - 82 150 - Typ. - - - - - 0.1 - 300 1.3 Max. - - - 0.5 0.5 0.3 180 - 2.2 Unit V V V A A V - MHz pF IC=50A IC=1mA IE=50A VCB=24V VEB=3V IC/IB=10mA/1mA VCE=6V, IC=1mA VCE=6V, IE= -1mA, f=100MHz VCB=6V, IE=0A, f=1MHz Conditions www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/2 2009.12 - Rev.B 2SC5659 / 2SC4618 / 2SC4098 / 2SC2413K / 2SC2058S Electrical characteristics curves 10 80 COLLECTOR CURRENT : IC (mA) Data Sheet 50 20 10 5 Ta=100C Ta=25C Ta= -55C COLLECTOR CURRENT : IC (mA) VCE=6V 200 VCE=5V Ta=25C 72 8 64 56 6 48 40 4 32 24 2 16 8 0 IB=0A 2 4 6 Ta=25C 8 10 DC CURRENT GAIN : hFE 100 3V 50 1V 2 1 0.5 0.2 0.1 0 20 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.2 0.5 1 2 5 10 20 50 100 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (mA) Fig.1 Ground emitter output characteristics Fig.2 Ground emitter propagation characteristics Fig.3 DC current gain vs. collector current ( ) VCE=5V 200 DC CURRENT GAIN : hFE COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Ta=25C 0.2 IC/IB=10 0.2 0.1 Ta=10 0C 100 25C -55C 0.1 IC/IB=50 20 0.05 50 0.05 Ta=100C 25C -55C 10 20 10 0.2 0.02 0.01 0.2 0.02 0.01 0.2 0.5 1 2 5 10 20 50 100 0.5 1 2 5 10 20 50 0.5 1 2 5 10 20 50 100 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( ) Fig.5 Collector-emitter saturation voltage vs. collector current ( ) Fig.6 Collector-emitter saturation voltage vs. collector current ( ) COLLECTOR TO BASE TIME CONSTANT : CC rbb' (ps) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) TRANSITION FREQUENCY : fT (MHz) Ta=25C VCE=6V 1000 100 Ta=25C f=1MHz IC=0A IE=0A Ta=25C VCE=6V f=31.8MHz 50 500 5 Cib 20 200 2 Cob 100 -1 10 -0.1 -0.2 -0.5 -1 -2 -5 -10 -2 -5 -10 -20 -50 1 0.1 0.5 1 2 5 10 20 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) EMITTER CURRENT : IE (mA) EMITTER CURRENT : IE (mA) Fig.7 Gain bandwidth product vs.emitter current Fig.8 Capacitance vs. voltage Fig.9 Collector to base time constance vs. emitter current www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/2 2009.12 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SC565909 | |
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |