 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ZMD-Standard November 2001 Package PDIP28 (300 mil) MDS 735 Supersedes Edition 11.95 Dimensions in millimetres Based on JEDEC JEP95: MS-001 BF und GS-003 1 Dimensions A1 Seating Plane E L A e b1 0,254 M Z c e1 28 1 D Pin 1 Index area Dimensions of Sub -Group B1 Amax A1min b1min ** ** Dimensions of Sub-Group C1 Amin A1max Lmax Dmin * * 5,10 0,38 0,35 0,59 0,20 0,36 2,54 7,62 7,00 7,62 2,60 1,00 * 3,00 1,80 5,00 34,40 35,00 0 15 b1max cmin cmax enom Dmax min max e1nom Emin* Emax* Lmin Zmax without mold-flash The lead position tolerance requires slots with a minimum diameter of 0,7mm. The spacing between adjacent slots is 2,54mm. ** 2 Weight 3 Package Body Material 4 Lead Material 5 Lead Finish 2,0 g Low Stress Epoxy FeNi-Alloy or Cu-Alloy solder plating Zentrum Mikroelektronik Dresden AG Editor: signed Schoder Check: signed Marx Date: 27.11.2001 Quality: signed Lorenz Doc-No. QS-000735-HD-03 Als Betriebsgeheimnis anvertraut. Alle Rechte vorbehalten. Proprietary data, company confidential. All rights reserved. |
Price & Availability of MDS735
 |
|
|
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |