|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TC74VCXR162245FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCXR162245FT Low-Voltage 16-Bit Bus Transceiver with 3.6-V Tolerant Inputs and Outputs The TC74VCXR162245FT is a high-performance CMOS 16-bit bus transceiver. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6 V. This 16 bit bus transceiver is controlled by direction control (DIR) inputs and output enable (OE) inputs which are common to each byte. It can be used as two 8-bit transceivers or one 16-bit transceiver. The direction of data transmission is determined by Weight: 0.25 g (typ.) the level of the DIR inputs. The OE inputs can be used to disable the device so that the busses are effectively isolated. The 26- series resistor helps reducing output overshoot and undershoot without external resistor. All inputs are equipped with protection circuits against static discharge. Features (Note) * * * 26- series resistors on all outputs Low-voltage operation: VCC = 1.8 to 3.6 V High-speed operation: tpd = 3.4 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 4.3 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 5.7 ns (max) (VCC = 1.8 V) * output current: IOH/IOL = 12 mA (min) (VCC = 3.0 V) : IOH/IOL = 8 mA (min) (VCC = 2.3 V) : IOH/IOL = 4 mA (min) (VCC = 1.8 V) * * * * * Latch-up performance: -300 mA ESD performance: Machine model 200 V Human body model 2000 V Package: TSSOP Bidirectional interface between 2.5 V and 3.3 V signals. 3.6-V tolerant function and power-down protection is provided on all inputs and outputs Note: Do not apply a signal to any bus pins when it is in the output mode. Damage may result. All floating (high impedance) bus pins must have their input level fixed by means of pull-up or pull-down resistors. 1 2007-10-19 TC74VCXR162245FT Pin Assignment (top view) 1OE IEC Logic Symbol 48 1 25 24 G3 3 EN1 (BA) 3 EN2 (AB) G6 6 EN4 (BA) 6 EN5 (AB) 1A1 1A2 1A3 1A4 1A5 1A6 1A7 1A8 2A1 2A2 47 46 44 43 41 40 38 37 36 35 33 32 30 29 27 26 4 5 1 2 2 3 5 6 8 9 11 12 13 14 16 17 19 20 22 23 1B1 1B2 1B3 1B4 1B5 1B6 1B7 1B8 2B1 2B2 2B3 2B4 2B5 2B6 2B7 2B8 1DIR 1B1 1B2 GND 1B3 1B4 VCC 1B5 1B6 1 2 3 4 5 6 7 8 9 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 1OE 1A1 1A2 GND 1A3 1A4 VCC 1A5 1A6 GND 1A7 1A8 2A1 2A2 GND 2A3 2A4 VCC 2A5 2A6 GND 2A7 2A8 1DIR 2OE 2DIR GND 10 1B7 11 1B8 12 2B1 13 2B2 14 GND 15 2B3 16 2B4 17 VCC 18 2B5 19 2B6 20 GND 21 2B7 22 2B8 23 2DIR 24 2A3 2A4 2A5 2A6 2A7 2A8 2OE 2 2007-10-19 TC74VCXR162245FT Truth Table Inputs 1OE L L H 1DIR L H X Function Bus 1A1-1A8 Output Input Z Bus 1B1-1B8 Input Output Outputs A=B B=A Z Inputs 2OE L L H 2DIR L H X Function BUS 2A1-2A8 Output Input Z BUS 2B1-2B8 Input Output Outputs A=B B=A Z X: Don't care Z : High impedance System Diagram 1DIR 1 24 2DIR 48 25 1OE 2OE 1A1 47 2 1B1 13 2B1 36 2A1 1/8 3 2007-10-19 TC74VCXR162245FT Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage DC input voltage (DIR, OE ) DC bus I/O voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current per supply pin Storage temperature Symbol VCC VIN Rating -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 (Note 2) VI/O IIK IOK IOUT PD ICC/IGND Tstg -0.5 to VCC + 0.5 (Note 3) -50 50 50 400 100 -65 to 150 (Note 4) mA mA mA mW mA C V Unit V V Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: OFF state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Power supply voltage Input voltage (DIR, OE ) Bus I/O voltage Symbol VCC VIN VI/O Rating 1.8 to 3.6 1.2 to 3.6 (Note 2) -0.3 to 3.6 0 to 3.6 (Note 3) 0 to VCC (Note 4) 12 Output current Operating temperature Input rise and fall time IOH/IOL Topr dt/dv 8 4 -40 to 85 0 to 10 (Note 8) (Note 5) (Note 6) (Note 7) C ns/V mA Unit V V V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and bus inputs must be tied to either VCC or GND. Please connect both bus inputs and the bus outputs with VCC or GND when the I/O of the bus terminal changes by the function. In this case, please note that the output is not short-circuited. Note 2: Data retention only Note 3: OFF state Note 4: High or low state Note 5: VCC = 3.0 to 3.6 V Note 6: VCC = 2.3 to 2.7 V Note 7: VCC = 1.8 V Note 8: VIN = 0.8 to 2.0 V, VCC = 3.0 V 4 2007-10-19 TC74VCXR162245FT Electrical Characteristics < DC Characteristics (Ta = -40 to 85C, 2.7 V < VCC = 3.6 V) Characteristics H-level L-level Symbol VIH VIL Test Condition IOH = -100 A H-level VOH VIN = VIH or VIL IOH = -6 mA IOH = -8 mA Output voltage IOH = -12 mA IOL = 100 A L-level VOL VIN = VIH or VIL IOL = 6 mA IOL = 8 mA IOL = 12 mA Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current Increase in ICC per input IIN IOZ IOFF ICC ICC VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = VIH = VCC - 0.6 V VCC (V) 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 2.7 3.0 3.0 2.7 to 3.6 2.7 to 3.6 0 2.7 to 3.6 2.7 to 3.6 2.7 to 3.6 Min 2.0 VCC - 0.2 2.2 2.4 2.2 Max 0.8 0.2 0.4 0.55 0.8 5.0 10.0 10.0 20.0 20.0 750 A A A A V Unit Input voltage V < < DC Characteristics (Ta = -40 to 85C, 2.3 V = VCC = 2.7 V) Characteristics H-level L-level Symbol VIH VIL Test Condition IOH = -100 A H-level Output voltage VOH VIN = VIH or VIL IOH = -4 mA IOH = -6 mA IOH = -8 mA IOL = 100 A L-level VOL VIN = VIH or VIL IOL = 6 mA IOL = 8 mA Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current IIN IOZ IOFF ICC VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = VCC (V) 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 2.3 2.3 2.3 to 2.7 2.3 2.3 2.3 to 2.7 2.3 to 2.7 0 2.3 to 2.7 2.3 to 2.7 Min 1.6 VCC - 0.2 2.0 1.8 1.7 Max 0.7 0.2 0.4 0.6 5.0 10.0 10.0 20.0 20.0 A A A A V Unit Input voltage V 5 2007-10-19 TC74VCXR162245FT < DC Characteristics (Ta = -40 to 85C, 1.8 V = VCC < 2.3 V) Characteristics Symbol Test Condition IOH = -100 A IOH = -4 mA L-level Input leakage current 3-state output OFF state current Power-off leakage current Quiescent supply current VOL IIN IOZ IOFF ICC VIN = VIH or VIL VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND VCC < (VIN, VOUT) < 3.6 V = = IOL = 100 A IOL = 4 mA VCC (V) 1.8 to 2.3 1.8 to 2.3 1.8 1.8 1.8 1.8 1.8 1.8 0 1.8 1.8 Min 0.7 x VCC VCC - 0.2 1.4 Max 0.2 x VCC 0.2 0.3 5.0 10.0 10.0 20.0 20.0 A A A A V V Unit H-level Input voltage L-level VIH VIL H-level Output voltage VOH VIN = VIH or VIL AC Characteristics (Ta = -40 to 85C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) (Note 1) Characteristics Symbol Test Condition VCC (V) 1.8 Figure 1, Figure 2 2.5 0.2 3.3 0.3 1.8 Figure 1, Figure 3 2.5 0.2 3.3 0.3 1.8 Figure 1, Figure 3 2.5 0.2 3.3 0.3 1.8 (Note 2) 2.5 0.2 3.3 0.3 Min 1.5 1.0 0.8 1.5 1.0 0.8 1.5 1.0 0.8 Max 5.7 4.3 3.4 7.6 5.7 4.2 5.7 4.8 4.1 0.5 0.5 0.5 ns ns ns ns Unit Propagation delay time tpLH tpHL 3-state output enable time tpZL tpZH 3-state output disable time tpLZ tpHZ Output to output skew tosLH tosHL Note 1: For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note 2: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 6 2007-10-19 TC74VCXR162245FT Dynamic Switching Characteristics (Ta = 25C, input: tr = tf = 2.0 ns, CL = 30 pF) Characteristics Symbol Test Condition VCC (V) VIH = 1.8 V, VIL = 0 V Quiet output maximum dynamic VOL VOLP VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOL VOLV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VIH = 1.8 V, VIL = 0 V Quiet output minimum dynamic VOH VOHV VIH = 2.5 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) (Note) 1.8 2.5 3.3 1.8 2.5 3.3 1.8 2.5 3.3 0.15 0.25 0.35 -0.15 -0.25 -0.35 1.55 2.05 2.65 V V V Typ. Unit Note: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Bus I/O capacitance Power dissipation capacitance Symbol CIN CI/O CPD fIN = 10 MHz Test Condition VCC (V) (Note) 1.8, 2.5, 3.3 1.8, 2.5, 3.3 1.8, 2.5, 3.3 Typ. 6 7 20 Unit pF pF pF Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/16 (per bit) 7 2007-10-19 TC74VCXR162245FT AC Test Circuit 6.0 V or VCC x 2 Open GND Measure CL RL CL = 30 pF RL = 500 Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH 6.0 V VCC x 2 Switch Open @VCC = 3.3 0.3 V @VCC = 2.5 0.2 V @VCC = 1.8 V GND Switch RL Output Figure 1 AC Waveform tr 2.0 ns Input (An, Bn) tf 2.0 ns 90% VM VIH 10% GND VOH VM tpLH tpHL VOL Output (Bn, An) Figure 2 tpLH, tpHL tr 2.0 ns Output Enable Control ( OE ) tpLZ Output (An, Bn) Low to Off to Low tpHZ Output (An, Bn) High to Off to High Outputs enabled tf 2.0 ns 90% VM VIH 10% tpZL 3.0 V or VCC VM VX tpZH VOL VOH VM GND Outputs disabled Outputs enabled GND VY Figure 3 tpLZ, tpHZ, tpZL, tpZH Symbol VIH VM VX VY VCC 3.3 0.3 V 2.7 V 1.5 V VOL + 0.3 V VOH - 0.3 V 2.5 0.2 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V 1.8 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V 8 2007-10-19 TC74VCXR162245FT Package Dimensions Weight: 0.25 g (typ.) 9 2007-10-19 TC74VCXR162245FT RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 10 2007-10-19 |
Price & Availability of TC74VCXR162245FT07 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |